IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v103y2017icp478-489.html
   My bibliography  Save this article

Design and optimization of a high-temperature cavity receiver for a solar energy cascade utilization system

Author

Listed:
  • Zou, Chongzhe
  • Zhang, Yanping
  • Falcoz, Quentin
  • Neveu, Pierre
  • Zhang, Cheng
  • Shu, Weicheng
  • Huang, Shuhong

Abstract

A solar energy cascade utilization system using concentrated solar power is being developed in response to the growing demand for renewable energy and distributed power generation. However, no investigations into the geometric parameters of a cavity receiver have been performed for the dish Stirling system in the present research field. This study proposes a design and an optimization method for a solar cavity receiver with the capability of achieving high operating temperatures. By developing a thermal model for the cavity geometry, results of this study provide a prediction of the real situation and a sensitivity analysis of the cavity receiver design. The designed cylindrical receiver with insulation consists of an enclosed bottom on the back, an aperture in the front, and a helical pipe inside. The aperture diameter, inner diameter, and length of the cavity are the three critical geometric parameters of the cavity receiver. The influence of these three parameters on heat losses and thermal efficiency is analyzed in this paper.

Suggested Citation

  • Zou, Chongzhe & Zhang, Yanping & Falcoz, Quentin & Neveu, Pierre & Zhang, Cheng & Shu, Weicheng & Huang, Shuhong, 2017. "Design and optimization of a high-temperature cavity receiver for a solar energy cascade utilization system," Renewable Energy, Elsevier, vol. 103(C), pages 478-489.
    • Handle: RePEc:eee:renene:v:103:y:2017:i:c:p:478-489
    DOI: 10.1016/j.renene.2016.11.044
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148116310138
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2016.11.044?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rubén Gil & Carlos Monné & Nuria Bernal & Mariano Muñoz & Francisco Moreno, 2015. "Thermal Model of a Dish Stirling Cavity-Receiver," Energies, MDPI, vol. 8(2), pages 1-16, January.
    2. Natarajan, Sendhil Kumar & Reddy, K.S. & Mallick, Tapas Kumar, 2012. "Heat loss characteristics of trapezoidal cavity receiver for solar linear concentrating system," Applied Energy, Elsevier, vol. 93(C), pages 523-531.
    3. Cui, Fuqing & He, Yaling & Cheng, Zedong & Li, Yinshi, 2013. "Study on combined heat loss of a dish receiver with quartz glass cover," Applied Energy, Elsevier, vol. 112(C), pages 690-696.
    4. Neber, Matthew & Lee, Hohyun, 2012. "Design of a high temperature cavity receiver for residential scale concentrated solar power," Energy, Elsevier, vol. 47(1), pages 481-487.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Davide Iaria & Homam Nipkey & Jafar Al Zaili & Abdulnaser Ibrahim Sayma & Mohsen Assadi, 2018. "Development and Validation of a Thermo-Economic Model for Design Optimisation and Off-Design Performance Evaluation of a Pure Solar Microturbine," Energies, MDPI, vol. 11(11), pages 1-26, November.
    2. Yanping, Zhang & Yuxuan, Chen & Chongzhe, Zou & Hu, Xiao & Falcoz, Quentin & Neveu, Pierre & Cheng, Zhang & Xiaohong, Huang, 2021. "Experimental investigation on heat-transfer characteristics of a cylindrical cavity receiver with pressurized air in helical pipe," Renewable Energy, Elsevier, vol. 163(C), pages 320-330.
    3. Loni, R. & Askari Asli-Ardeh, E. & Ghobadian, B. & Kasaeian, A.B. & Bellos, Evangelos, 2018. "Thermal performance comparison between Al2O3/oil and SiO2/oil nanofluids in cylindrical cavity receiver based on experimental study," Renewable Energy, Elsevier, vol. 129(PA), pages 652-665.
    4. Xue, Xue & Liu, Xiang & Zhu, Yifan & Yuan, Lei & Zhu, Ying & Jin, Kelang & Zhang, Lei & Zhou, Hao, 2023. "Numerical modeling and parametric study of the heat storage process of the 1.05 MW molten salt furnace," Energy, Elsevier, vol. 282(C).
    5. Loni, R. & Kasaeian, A.B. & Askari Asli-Ardeh, E. & Ghobadian, B. & Gorjian, Sh, 2018. "Experimental and numerical study on dish concentrator with cubical and cylindrical cavity receivers using thermal oil," Energy, Elsevier, vol. 154(C), pages 168-181.
    6. Kasaeian, Alibakhsh & Kouravand, Amir & Vaziri Rad, Mohammad Amin & Maniee, Siavash & Pourfayaz, Fathollah, 2021. "Cavity receivers in solar dish collectors: A geometric overview," Renewable Energy, Elsevier, vol. 169(C), pages 53-79.
    7. Wang, Ding & Chen, Yuxuan & Xiao, Hu & Zhang, Yanping, 2022. "Effects of geometric and operating parameters on thermal performance of conical cavity receivers using supercritical CO2 as heat transfer fluid," Renewable Energy, Elsevier, vol. 185(C), pages 804-819.
    8. Wang, Jiangjiang & Ma, Chaofan & Wu, Jing, 2019. "Thermodynamic analysis of a combined cooling, heating and power system based on solar thermal biomass gasification☆," Applied Energy, Elsevier, vol. 247(C), pages 102-115.
    9. Zhang, Li & Fang, Jiabin & Wei, Jinjia & Yang, Guidong, 2017. "Numerical investigation on the thermal performance of molten salt cavity receivers with different structures," Applied Energy, Elsevier, vol. 204(C), pages 966-978.
    10. Zhang, Yanping & Xiao, Hu & Zou, Chongzhe & Falcoz, Quentin & Neveu, Pierre, 2020. "Combined optics and heat transfer numerical model of a solar conical receiver with built-in helical pipe," Energy, Elsevier, vol. 193(C).
    11. Wang, Shuang & Asselineau, Charles-Alexis & Fontalvo, Armando & Wang, Ye & Logie, William & Pye, John & Coventry, Joe, 2023. "Co-optimisation of the heliostat field and receiver for concentrated solar power plants," Applied Energy, Elsevier, vol. 348(C).
    12. Rafique, Muhammad M. & Nathan, Graham & Saw, Woei, 2021. "A mathematical model to assess the influence of transients on a refractory-lined solar receiver," Renewable Energy, Elsevier, vol. 167(C), pages 217-235.
    13. Chen, Jinli & Xiao, Gang & Xu, Haoran & Zhou, Xin & Yang, Jiamin & Ni, Mingjiang & Cen, Kefa, 2022. "Experiment and dynamic simulation of a solar tower collector system for power generation," Renewable Energy, Elsevier, vol. 196(C), pages 946-958.
    14. Chu, Shunzhou & Bai, Fengwu & Zhang, Xiliang & Yang, Bei & Cui, Zhiying & Nie, Fuliang, 2018. "Experimental study and thermal analysis of a tubular pressurized air receiver," Renewable Energy, Elsevier, vol. 125(C), pages 413-424.
    15. Li, Yawei & Zhou, Hao & Zuo, Yuhang & Zhang, Mingrui, 2022. "Experimental and numerical study on the preheating process of a lab-scale solar molten salt receiver," Renewable Energy, Elsevier, vol. 182(C), pages 602-614.
    16. Hassan, Atazaz & Quanfang, Chen & Abbas, Sajid & Lu, Wu & Youming, Luo, 2021. "An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator," Renewable Energy, Elsevier, vol. 179(C), pages 1849-1864.
    17. Zhou, Hao & Li, Yawei & Zuo, Yuhang & Zhou, Mingxi & Fang, Wenfeng & Zhu, Yifan, 2021. "Thermal performance and thermal stress analysis of a 600 MWth solar cylinder external receiver," Renewable Energy, Elsevier, vol. 164(C), pages 331-345.
    18. Zayed, Mohamed E. & Zhao, Jun & Li, Wenjia & Elsheikh, Ammar H. & Elaziz, Mohamed Abd, 2021. "A hybrid adaptive neuro-fuzzy inference system integrated with equilibrium optimizer algorithm for predicting the energetic performance of solar dish collector," Energy, Elsevier, vol. 235(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ji-Qiang Li & Jeong-Tae Kwon & Seon-Jun Jang, 2020. "The Power and Efficiency Analyses of the Cylindrical Cavity Receiver on the Solar Stirling Engine," Energies, MDPI, vol. 13(21), pages 1-17, November.
    2. Jianfeng Lu & Yarong Wang & Jing Ding, 2020. "Nonuniform Heat Transfer Model and Performance of Molten Salt Cavity Receiver," Energies, MDPI, vol. 13(4), pages 1-19, February.
    3. Azzouzi, Djelloul & Bourorga, Houssam eddine & Belainine, Khathir abdelrahim & Boumeddane, Boussad, 2018. "Experimental study of a designed solar parabolic trough with large rim angle," Renewable Energy, Elsevier, vol. 125(C), pages 495-500.
    4. Qiu, Yu & He, Ya-Ling & Wu, Ming & Zheng, Zhang-Jing, 2016. "A comprehensive model for optical and thermal characterization of a linear Fresnel solar reflector with a trapezoidal cavity receiver," Renewable Energy, Elsevier, vol. 97(C), pages 129-144.
    5. Azzouzi, Djelloul & Boumeddane, Boussad & Abene, Abderahmane, 2017. "Experimental and analytical thermal analysis of cylindrical cavity receiver for solar dish," Renewable Energy, Elsevier, vol. 106(C), pages 111-121.
    6. Rubén Gil & Carlos Monné & Nuria Bernal & Mariano Muñoz & Francisco Moreno, 2015. "Thermal Model of a Dish Stirling Cavity-Receiver," Energies, MDPI, vol. 8(2), pages 1-16, January.
    7. Li, Xueling & Chang, Huawei & Duan, Chen & Zheng, Yao & Shu, Shuiming, 2019. "Thermal performance analysis of a novel linear cavity receiver for parabolic trough solar collectors," Applied Energy, Elsevier, vol. 237(C), pages 431-439.
    8. Li, Xueling & Li, Renfu & Chang, Huawei & Zeng, Lijian & Xi, Zhaojun & Li, Yichao, 2022. "Numerical simulation of a cavity receiver enhanced with transparent aerogel for parabolic dish solar power generation," Energy, Elsevier, vol. 246(C).
    9. Fouad, Aya & Galal, Abdelrahman & Dessoki, Khaled & Eldakamawy, Mohamed H. & Hassan, Muhammed A. & Araji, Mohamad T., 2024. "Influence of geometric design variables on the performance of a novel V-shaped cavity receiver," Renewable Energy, Elsevier, vol. 230(C).
    10. Soltani, Sara & Bonyadi, Mohammad & Madadi Avargani, Vahid, 2019. "A novel optical-thermal modeling of a parabolic dish collector with a helically baffled cylindrical cavity receiver," Energy, Elsevier, vol. 168(C), pages 88-98.
    11. Abbas, R. & Sebastián, A. & Montes, M.J. & Valdés, M., 2018. "Optical features of linear Fresnel collectors with different secondary reflector technologies," Applied Energy, Elsevier, vol. 232(C), pages 386-397.
    12. Mostafa Ahmed & Ali Radwan & Ahmed Serageldin & Saim Memon & Takao Katsura & Katsunori Nagano, 2020. "Thermal Analysis of a New Sliding Smart Window Integrated with Vacuum Insulation, Photovoltaic, and Phase Change Material," Sustainability, MDPI, vol. 12(19), pages 1-21, September.
    13. Yeongmin Kim & Wongee Chun & Kuan Chen, 2017. "Thermal-Flow Analysis of a Simple LTD (Low-Temperature-Differential) Heat Engine," Energies, MDPI, vol. 10(4), pages 1-16, April.
    14. de Beer, J.H. & le Roux, W.G. & Sciacovelli, A. & Meyer, J.P., 2023. "Effect of a novel cooling window on a recuperated solar-dish Brayton cycle," Renewable Energy, Elsevier, vol. 208(C), pages 465-480.
    15. Cheng, Ze-Dong & Zhao, Xue-Ru & He, Ya-Ling & Qiu, Yu, 2018. "A novel optical optimization model for linear Fresnel reflector concentrators," Renewable Energy, Elsevier, vol. 129(PA), pages 486-499.
    16. Qiu, Yu & Li, Ming-Jia & Wang, Kun & Liu, Zhan-Bin & Xue, Xiao-Dai, 2017. "Aiming strategy optimization for uniform flux distribution in the receiver of a linear Fresnel solar reflector using a multi-objective genetic algorithm," Applied Energy, Elsevier, vol. 205(C), pages 1394-1407.
    17. Ngo, L.C. & Bello-Ochende, T. & Meyer, J.P., 2015. "Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins," Renewable Energy, Elsevier, vol. 74(C), pages 95-105.
    18. Hai Wang, 2023. "Comparative Study of a Fixed-Focus Fresnel Lens Solar Concentrator/Conical Cavity Receiver System with and without Glass Cover Installed in a Solar Cooker," Sustainability, MDPI, vol. 15(12), pages 1-19, June.
    19. Lim, Jin Han & Dally, Bassam B. & Chinnici, Alfonso & Nathan, Graham J., 2017. "Techno-economic evaluation of modular hybrid concentrating solar power systems," Energy, Elsevier, vol. 129(C), pages 158-170.
    20. Qiu, Yu & He, Ya-Ling & Li, Peiwen & Du, Bao-Cun, 2017. "A comprehensive model for analysis of real-time optical performance of a solar power tower with a multi-tube cavity receiver," Applied Energy, Elsevier, vol. 185(P1), pages 589-603.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:103:y:2017:i:c:p:478-489. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.