IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v234y2023ics0951832023000443.html
   My bibliography  Save this article

A novel delay time modelling method for incorporating reuse actions in three-state single-component systems

Author

Listed:
  • Santos, Augusto César de Jesus
  • Cavalcante, Cristiano Alexandre Virginio
  • Ren, Junru
  • Wu, Shaomin

Abstract

This paper presents a new delay time modelling method for reusing single-component systems with two defective states and one failure state. It assumes that a component may be reused for the purposes of resource, economic and environmental sustainability. The possibility of reusing industrial components is not generally considered in maintenance models, which represents a knowledge gap in the literature, especially in the delay time related models. To address this gap, this paper proposes a method based on the delay time modelling method to investigate different scenarios of component reusability and uses real-world systems in the mining industry to illustrate its applicability. The paper then derives the expected cost rate, obtains lower and upper bounds of the expected total cost, considers the improving learning rate of correctly classifying defective components and incorporates the environmental impact of disposed components in optimization of the inspection interval. Results discuss when the reuse action may provide economic benefits even when the reused item may have different reliability than new one.

Suggested Citation

  • Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virginio & Ren, Junru & Wu, Shaomin, 2023. "A novel delay time modelling method for incorporating reuse actions in three-state single-component systems," Reliability Engineering and System Safety, Elsevier, vol. 234(C).
    • Handle: RePEc:eee:reensy:v:234:y:2023:i:c:s0951832023000443
    DOI: 10.1016/j.ress.2023.109129
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832023000443
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2023.109129?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Huiying & Wang, Wenbin & Peng, Rui, 2017. "A two-phase inspection model for a single component system with three-stage degradation," Reliability Engineering and System Safety, Elsevier, vol. 158(C), pages 31-40.
    2. Baker, R. D. & Christer, A. H., 1994. "Review of delay-time OR modelling of engineering aspects of maintenance," European Journal of Operational Research, Elsevier, vol. 73(3), pages 407-422, March.
    3. Scarf, Philip A., 1997. "On the application of mathematical models in maintenance," European Journal of Operational Research, Elsevier, vol. 99(3), pages 493-506, June.
    4. Vrignat, Pascal & Kratz, Frédéric & Avila, Manuel, 2022. "Sustainable manufacturing, maintenance policies, prognostics and health management: A literature review," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    5. Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virgínio & Wu, Shaomin, 2023. "Maintenance policies and models: A bibliometric and literature review of strategies for reuse and remanufacturing," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    6. Wang, Yukun & Liu, Yiliu & Liu, Zixian & Li, Xiaopeng, 2017. "On reliability improvement program for second-hand products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 452-463.
    7. Shafiee, Mahmood & Finkelstein, Maxim & Chukova, Stefanka, 2011. "On optimal upgrade level for used products under given cost structures," Reliability Engineering and System Safety, Elsevier, vol. 96(2), pages 286-291.
    8. Safaei, Fatemeh & Ahmadi, Jafar & Taghipour, Sharareh, 2022. "A maintenance policy for a k-out-of-n system under enhancing the system’s operating time and safety constraints, and selling the second-hand components," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    9. Sidibe, I.B. & Khatab, A. & Diallo, C. & Kassambara, A., 2017. "Preventive maintenance optimization for a stochastically degrading system with a random initial age," Reliability Engineering and System Safety, Elsevier, vol. 159(C), pages 255-263.
    10. Wang, Wenbin, 2012. "An overview of the recent advances in delay-time-based maintenance modelling," Reliability Engineering and System Safety, Elsevier, vol. 106(C), pages 165-178.
    11. Wakiru, James & Pintelon, Liliane & Muchiri, Peter N. & Chemweno, Peter K., 2021. "Integrated remanufacturing, maintenance and spares policies towards life extension of a multi-component system," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    12. Dai, Anshu & Wei, Guanzhou & Wang, Dongfan & He, Zhen & He, Shuguang, 2021. "The opportunity study of PM strategy for second-hand products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    13. Park, Minjae & Jung, Ki Mun & Park, Dong Ho, 2020. "Warranty cost analysis for second-hand products under a two-stage repair-or-full refund policy," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    14. Lo, Hui-Chiung & Yu, Rouh-Yun, 2013. "A study of quality management strategy for reused products," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 172-177.
    15. Scarf, Philip A. & Cavalcante, Cristiano A.V., 2012. "Modelling quality in replacement and inspection maintenance," International Journal of Production Economics, Elsevier, vol. 135(1), pages 372-381.
    16. Zhu, Ying & Xia, Tangbin & Hong, Ge & Chen, Zhen & Pan, Ershun & Xi, Lifeng, 2022. "Collaborative maintenance service and component sales under coopetition patterns for OEMs challenged by booming used-component sales," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virgínio & Wu, Shaomin, 2023. "Maintenance policies and models: A bibliometric and literature review of strategies for reuse and remanufacturing," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    2. Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virgínio, 2022. "A study on the economic and environmental viability of second-hand items in maintenance policies," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    3. de Jonge, Bram & Scarf, Philip A., 2020. "A review on maintenance optimization," European Journal of Operational Research, Elsevier, vol. 285(3), pages 805-824.
    4. Zhang, Fengxia & Shen, Jingyuan & Liao, Haitao & Ma, Yizhong, 2021. "Optimal preventive maintenance policy for a system subject to two-phase imperfect inspections," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    5. Akcay, Alp, 2022. "An alert-assisted inspection policy for a production process with imperfect condition signals," European Journal of Operational Research, Elsevier, vol. 298(2), pages 510-525.
    6. Dai, Anshu & Wei, Guanzhou & Wang, Dongfan & He, Zhen & He, Shuguang, 2021. "The opportunity study of PM strategy for second-hand products sold with a two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    7. Wang, Jiantai & Ma, Xiaobing & Yang, Li & Qiu, Qingan & Shang, Lijun & Wang, Jingjing, 2024. "A hybrid inspection-replacement policy for multi-stage degradation considering imperfect inspection with variable probabilities," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    8. Alberti, Alexandre R. & Cavalcante, Cristiano A.V. & Scarf, Philip & Silva, André L.O., 2018. "Modelling inspection and replacement quality for a protection system," Reliability Engineering and System Safety, Elsevier, vol. 176(C), pages 145-153.
    9. Esmat Baghdadi & Mahmood Shafiee & Babakalli Alkali, 2022. "Upgrading Strategy, Warranty Policy and Pricing Decisions for Remanufactured Products Sold with Two-Dimensional Warranty," Sustainability, MDPI, vol. 14(12), pages 1-15, June.
    10. Scarf, P.A. & Cavalcante, C.A.V. & Lopes, R.S., 2019. "Delay-time modelling of a critical system subject to random inspections," European Journal of Operational Research, Elsevier, vol. 278(3), pages 772-782.
    11. Wang, Jiantai & Longyan, Tan & Ma, Xiaobing & Gao, Kaiye & Jia, Heping & Yang, Li, 2023. "Prognosis-driven reliability analysis and replacement policy optimization for two-phase continuous degradation," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    12. Yang, Li & Ye, Zhi-sheng & Lee, Chi-Guhn & Yang, Su-fen & Peng, Rui, 2019. "A two-phase preventive maintenance policy considering imperfect repair and postponed replacement," European Journal of Operational Research, Elsevier, vol. 274(3), pages 966-977.
    13. Gao, Kaiye & Peng, Rui & Qu, Li & Wu, Shaomin, 2020. "Jointly optimizing lot sizing and maintenance policy for a production system with two failure modes," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    14. Yang, Li & Ma, Xiaobing & Zhai, Qingqing & Zhao, Yu, 2016. "A delay time model for a mission-based system subject to periodic and random inspection and postponed replacement," Reliability Engineering and System Safety, Elsevier, vol. 150(C), pages 96-104.
    15. Peng, Shizhe & Jiang, Wei & Huang, Wenpo & Luo, Qinglin, 2024. "The impact of gamma usage processes on preventive maintenance policies under two-dimensional warranty," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    16. Zahedi-Hosseini, Farhad & Scarf, Philip & Syntetos, Aris, 2017. "Joint optimisation of inspection maintenance and spare parts provisioning: a comparative study of inventory policies using simulation and survey data," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 306-316.
    17. Zhu, Ying & Xia, Tangbin & Hong, Ge & Chen, Zhen & Pan, Ershun & Xi, Lifeng, 2022. "Collaborative maintenance service and component sales under coopetition patterns for OEMs challenged by booming used-component sales," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    18. Wang, Jiantai & Zhou, Shihan & Peng, Rui & Qiu, Qingan & Yang, Li, 2023. "An inspection-based replacement planning in consideration of state-driven imperfect inspections," Reliability Engineering and System Safety, Elsevier, vol. 232(C).
    19. Mohamed Noomane Darghouth & Anis Chelbi & Daoud Ait-kadi, 2017. "Investigating reliability improvement of second-hand production equipment considering warranty and preventive maintenance strategies," International Journal of Production Research, Taylor & Francis Journals, vol. 55(16), pages 4643-4661, August.
    20. Nafisah, Ibrahim & Shrahili, Mansour & Alotaibi, Naif & Scarf, Phil, 2019. "Virtual series-system models of imperfect repair," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 604-613.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:234:y:2023:i:c:s0951832023000443. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.