IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v229y2023ics0951832022004471.html
   My bibliography  Save this article

Bayesian Networks based approach to enhance GO methodology for reliability modeling of multi-state consecutive-k-out-of-n: F system

Author

Listed:
  • Tian-yuan, Ye
  • Lin-lin, Liu
  • He-wei, Pang
  • Yuan-zi, Zhou

Abstract

As a success-oriented system reliability and safety analysis technique, GO methodology is widely used in the modeling and analysis scenarios of critical safety engineering systems with signal flow, such as nuclear, chemical industry, electric power transportation, wireless network and microwave communication network. Consecutive-k-out-of-n systems are also widely applied in these fields, but due to their relatively complex logic, there are no corresponding graphical modeling and calculation methods. In this paper, the basic GO methodology is extended to support the modeling and analysis of multi-state linear and circular consecutive-k-out-of-n: F system (MLC(k,n) &MCC(k,n)) models. Two new operators are defined in graphical modeling to represent the two types of complex system logic. The multi-state logic semantics of the new operators and mapping rules to Bayesian networks (BN) are given. And the programmable process is presented to transform the extended GO model into BN, and the reliability of the MLC(k,n)/MCC(k,n) is calculated. Finally, three cases are used to verify i) the correctness of the method supporting multi-state model, ii) the efficiency and ability of the algorithm, and iii) the forward calculation and reverse diagnosis of the MLC(k,n) and MCC(k,n) systems with external shared components.

Suggested Citation

  • Tian-yuan, Ye & Lin-lin, Liu & He-wei, Pang & Yuan-zi, Zhou, 2023. "Bayesian Networks based approach to enhance GO methodology for reliability modeling of multi-state consecutive-k-out-of-n: F system," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    • Handle: RePEc:eee:reensy:v:229:y:2023:i:c:s0951832022004471
    DOI: 10.1016/j.ress.2022.108828
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832022004471
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2022.108828?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Xiaoge & Mahadevan, Sankaran, 2021. "Bayesian network modeling of accident investigation reports for aviation safety assessment," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    2. Wang, Dan & Si, Shubin & Cai, Zhiqiang & Zhao, Jiangbin, 2021. "Reliability optimization of linear consecutive-k-out-of-n: F systems driven by reconfigurable importance," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    3. Asadayoobi, N. & Taghipour, S. & Jaber, M.Y., 2022. "Predicting human reliability based on probabilistic mission completion time using Bayesian Network," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    4. Dui, Hongyan & Tian, Tianzi & Zhao, Jiangbin & Wu, Shaomin, 2022. "Comparing with the joint importance under consideration of consecutive-k-out-of-n system structure changes," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    5. Qiu, Siqi & Sallak, Mohamed & Schön, Walter & Ming, Henry X.G., 2018. "Extended LK heuristics for the optimization of linear consecutive-k-out-of-n: F systems considering parametric uncertainty and model uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 175(C), pages 51-61.
    6. Langseth, Helge & Portinale, Luigi, 2007. "Bayesian networks in reliability," Reliability Engineering and System Safety, Elsevier, vol. 92(1), pages 92-108.
    7. Bistouni, Fathollah & Jahanshahi, Mohsen, 2014. "Analyzing the reliability of shuffle-exchange networks using reliability block diagrams," Reliability Engineering and System Safety, Elsevier, vol. 132(C), pages 97-106.
    8. Yu, Haiyue & Wu, Xinyang & Wu, Xiaoyue, 2020. "An extended object-oriented petri net model for mission reliability evaluation of phased-mission system with time redundancy," Reliability Engineering and System Safety, Elsevier, vol. 197(C).
    9. Yin, Juan & Cui, Lirong, 2021. "Reliability for consecutive-k-out-of-n: F systems with shared components between adjacent subsystems," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    10. Li, Mingjia & Hu, Linmin & Peng, Rui & Bai, Zhuoxin, 2021. "Reliability modeling for repairable circular consecutive-k-out-of-n: F systems with retrial feature," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    11. Xu, Sheng & Kim, Ekaterina & Haugen, Stein & Zhang, Mingyang, 2022. "A Bayesian network risk model for predicting ship besetting in ice during convoy operations along the Northern Sea Route," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    12. Dui, Hongyan & Si, Shubin & Yam, Richard C.M., 2018. "Importance measures for optimal structure in linear consecutive-k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 169(C), pages 339-350.
    13. Mo, Yuchang & Xing, Liudong & Cui, Lirong & Si, Shubin, 2017. "MDD-based performability analysis of multi-state linear consecutive-k-out-of-n: F systems," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 124-131.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zerouali, Bilal & Sahraoui, Yacine & Nahal, Mourad & Chateauneuf, Alaa, 2024. "Reliability-based maintenance optimization of long-distance oil and gas transmission pipeline networks," Reliability Engineering and System Safety, Elsevier, vol. 249(C).
    2. Oszczypała, Mateusz & Konwerski, Jakub & Ziółkowski, Jarosław & Małachowski, Jerzy, 2024. "Reliability analysis and redundancy optimization of k-out-of-n systems with random variable k using continuous time Markov chain and Monte Carlo simulation," Reliability Engineering and System Safety, Elsevier, vol. 242(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhao, Fei & Peng, Rui & Zhang, Nan, 2023. "Inspection policy optimization for a k-out-of-n/Cl(k′,n′;F) system considering failure dependence: a case study," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    2. Wang, Yan & Hu, Linmin & Yang, Li & Li, Jing, 2022. "Reliability modeling and analysis for linear consecutive-k-out-of-n: F retrial systems with two maintenance activities," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    3. Yin, Juan & Cui, Lirong & Balakrishnan, Narayanaswamy, 2022. "Reliability of consecutive-(k,l)-out-of-n: F systems with shared components under non-homogeneous Markov dependence," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    4. Wang, Fang & Bai, Jie & Liu, Linlin & Ye, Tianyuan, 2024. "Temporal noisy-adder of bayesian network for scalable consecutive-k-out-of-n:F system reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    5. Zhang, Changzhen & Yang, Jun & Li, Mingjia & Wang, Ning, 2024. "Reliability analysis of a two-dimensional linear consecutive-(r,s)-out-of-(m,n): F repairable system," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    6. Podofillini, Luca & Reer, Bernhard & Dang, Vinh N., 2023. "A traceable process to develop Bayesian networks from scarce data and expert judgment: A human reliability analysis application," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    7. Dui, Hongyan & Tian, Tianzi & Zhao, Jiangbin & Wu, Shaomin, 2022. "Comparing with the joint importance under consideration of consecutive-k-out-of-n system structure changes," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    8. Li, Mingjia & Hu, Linmin & Wu, Shaomin & Zhao, Bing & Wang, Yan, 2023. "Reliability assessment for consecutive-k-out-of-n: F retrial systems under Poisson shocks," Applied Mathematics and Computation, Elsevier, vol. 448(C).
    9. Lu, Shaoqi & Shi, Daimin & Xiao, Hui, 2019. "Reliability of sliding window systems with two failure modes," Reliability Engineering and System Safety, Elsevier, vol. 188(C), pages 366-376.
    10. Yi, He & Balakrishnan, Narayanaswamy & Li, Xiang, 2023. "Reliability of three-dimensional consecutive k-type systems," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    11. Liu, Mingli & Wang, Dan & Si, Shubin, 2023. "Mixed reliability importance-based solving algorithm design for the cost-constrained reliability optimization model," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    12. Eryilmaz, Serkan & Yalcin, Femin, 2022. "The number of failed components upon system failure when the lifetimes are discretely distributed," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    13. Li, Mingjia & Hu, Linmin & Peng, Rui & Bai, Zhuoxin, 2021. "Reliability modeling for repairable circular consecutive-k-out-of-n: F systems with retrial feature," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    14. Xiao, Yong & Wei, Shanbi & Chai, Yi & Pan, Tianle & Hou, Yang, 2023. "Reliability optimization of flexible test system based on pyro-mechanical device products production driven," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    15. Liu, Mingli & Wang, Dan & Zhao, Jiangbin & Si, Shubin, 2022. "Importance measure construction and solving algorithm oriented to the cost-constrained reliability optimization model," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    16. Qiu, Siqi & Ming, Xinguo & Sallak, Mohamed & Lu, Jialiang, 2022. "A Birnbaum importance-based two-stage approach for two-type component assignment problems," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    17. Gao, Hongda & Tu, Tengfei & Qiu, Qingan, 2024. "Reliability analysis for a generalized sparse connection multi-state consecutive-k-out-of-n linear system," Reliability Engineering and System Safety, Elsevier, vol. 246(C).
    18. Rose, Rodrigo L. & Puranik, Tejas G. & Mavris, Dimitri N. & Rao, Arjun H., 2022. "Application of structural topic modeling to aviation safety data," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    19. Zhao, Xian & He, Zongda & Wu, Yaguang & Qiu, Qingan, 2022. "Joint optimization of condition-based performance control and maintenance policies for mission-critical systems," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    20. Wang, Rongxi & Li, Yufan & Xu, Jinjin & Wang, Zhen & Gao, Jianmin, 2022. "F2G: A hybrid fault-function graphical model for reliability analysis of complex equipment with coupled faults," Reliability Engineering and System Safety, Elsevier, vol. 226(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:229:y:2023:i:c:s0951832022004471. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.