IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v226y2022ics095183202200299x.html
   My bibliography  Save this article

Reliability modeling and analysis for linear consecutive-k-out-of-n: F retrial systems with two maintenance activities

Author

Listed:
  • Wang, Yan
  • Hu, Linmin
  • Yang, Li
  • Li, Jing

Abstract

This paper focuses on a linear consecutive-k-out-of-n: F repairable retrial system with an unreliable repair facility, in which preventive maintenance (PM) and repair for working breakdowns are considered for the repair facility. When a component fails, it can be repaired immediately if the repair facility is idle. Otherwise, the failed one would enter the retrial orbit and try again according to the first in first out. Based on repair priority of key components, the steady-state probabilities of the system are derived by using Markov process theory and Crammer’s rule. We analytically calculate steady-state indexes such as steady-state availability, steady-state failure frequency, and mean cycle time of the system. Furthermore, the Runge–Kutta method and the Laplace transform method are employed to obtain the reliability function and the mean time to first failure (MTTFF). Moreover, cost-effectiveness ratio (CER) analysis of the system is provided. Numerical experiments are conducted to illustrate the developed system model and perform influence analysis of PM on steady-state availability and CER for the models with and without PM.

Suggested Citation

  • Wang, Yan & Hu, Linmin & Yang, Li & Li, Jing, 2022. "Reliability modeling and analysis for linear consecutive-k-out-of-n: F retrial systems with two maintenance activities," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    • Handle: RePEc:eee:reensy:v:226:y:2022:i:c:s095183202200299x
    DOI: 10.1016/j.ress.2022.108665
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S095183202200299X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2022.108665?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yen, Tseng-Chang & Wang, Kuo-Hsiung, 2020. "Cost benefit analysis of four retrial systems with warm standby units and imperfect coverage," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    2. Samira Taleb & Amar Aissani, 2016. "Preventive maintenance in an unreliable M/G/1 retrial queue with persistent and impatient customers," Annals of Operations Research, Springer, vol. 247(1), pages 291-317, December.
    3. Wang, Dan & Si, Shubin & Cai, Zhiqiang & Zhao, Jiangbin, 2021. "Reliability optimization of linear consecutive-k-out-of-n: F systems driven by reconfigurable importance," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    4. Hamdan, K. & Tavangar, M. & Asadi, M., 2021. "Optimal preventive maintenance for repairable weighted k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    5. Eryilmaz, Serkan, 2020. "Age-based preventive maintenance for coherent systems with applications to consecutive-k-out-of-n and related systems," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    6. Chen, Wu-Lin & Wang, Kuo-Hsiung, 2018. "Reliability analysis of a retrial machine repair problem with warm standbys and a single server with N-policy," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 476-486.
    7. Gao, Shan & Wang, Jinting, 2021. "Reliability and availability analysis of a retrial system with mixed standbys and an unreliable repair facility," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    8. Wu‐Lin Chen, 2018. "System reliability analysis of retrial machine repair systems with warm standbys and a single server of working breakdown and recovery policy," Systems Engineering, John Wiley & Sons, vol. 21(1), pages 59-69, January.
    9. Gao, Shan & Wang, Jinting, 2014. "Performance and reliability analysis of an M/G/1-G retrial queue with orbital search and non-persistent customers," European Journal of Operational Research, Elsevier, vol. 236(2), pages 561-572.
    10. Yin, Juan & Cui, Lirong, 2021. "Reliability for consecutive-k-out-of-n: F systems with shared components between adjacent subsystems," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    11. A. Krishnamoorthy & P. Ushakumari, 1999. "Reliability of ak-out-of-n system with repair and retrial of failed units," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 7(2), pages 293-304, December.
    12. Li, Mingjia & Hu, Linmin & Peng, Rui & Bai, Zhuoxin, 2021. "Reliability modeling for repairable circular consecutive-k-out-of-n: F systems with retrial feature," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    13. Wang, Jingjing & Miao, Yonghao, 2021. "Optimal preventive maintenance policy of the balanced system under the semi-Markov model," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    14. Dafnis, Spiros D. & Makri, Frosso S. & Philippou, Andreas N., 2019. "The reliability of a generalized consecutive system," Applied Mathematics and Computation, Elsevier, vol. 359(C), pages 186-193.
    15. Wu, Chia-Huang & Yen, Tseng-Chang & Wang, Kuo-Hsiung, 2021. "Availability and Comparison of Four Retrial Systems with Imperfect Coverage and General Repair Times," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    16. Dui, Hongyan & Si, Shubin & Yam, Richard C.M., 2018. "Importance measures for optimal structure in linear consecutive-k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 169(C), pages 339-350.
    17. Yang, Dong-Yuh & Wu, Chia-Huang, 2021. "Evaluation of the availability and reliability of a standby repairable system incorporating imperfect switchovers and working breakdowns," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    18. Xiao, Gang & Li, Zhizhong & Li, Ting, 2007. "Dependability estimation for non-Markov consecutive-k-out-of-n: F repairable systems by fast simulation," Reliability Engineering and System Safety, Elsevier, vol. 92(3), pages 293-299.
    19. Yang, Dong-Yuh & Tsao, Chih-Lung, 2019. "Reliability and availability analysis of standby systems with working vacations and retrial of failed components," Reliability Engineering and System Safety, Elsevier, vol. 182(C), pages 46-55.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jain, Madhu & Kumar, Pankaj & Singh, Mayank & Gupta, Ritu, 2024. "Cost optimization and reliability analysis of fault tolerant system with service interruption and reboot," Reliability Engineering and System Safety, Elsevier, vol. 249(C).
    2. Wang, Fang & Bai, Jie & Liu, Linlin & Ye, Tianyuan, 2024. "Temporal noisy-adder of bayesian network for scalable consecutive-k-out-of-n:F system reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    3. Yi, He & Balakrishnan, Narayanaswamy & Li, Xiang, 2023. "Reliability of three-dimensional consecutive k-type systems," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    4. Ioannis S. Triantafyllou, 2022. "Signature-Based Analysis of the Weighted- r -within-Consecutive- k -out-of- n : F Systems," Mathematics, MDPI, vol. 10(15), pages 1-13, July.
    5. Zhang, Changzhen & Yang, Jun & Li, Mingjia & Wang, Ning, 2024. "Reliability analysis of a two-dimensional linear consecutive-(r,s)-out-of-(m,n): F repairable system," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    6. Zhao, Fei & Peng, Rui & Zhang, Nan, 2023. "Inspection policy optimization for a k-out-of-n/Cl(k′,n′;F) system considering failure dependence: a case study," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    7. Guo, Linhan & Li, Ruiyang & Wang, Yu & Yang, Jun & Liu, Yu & Chen, Yiming & Zhang, Jianguo, 2023. "Availability for multi-component k-out-of-n: G warm-standby system in series with shut-off rule of suspended animation," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    8. Yu, Xiaoyun & Hu, Linmin & Ma, Mengrao, 2023. "Reliability measures of discrete time k-out-of-n: G retrial systems based on Bernoulli shocks," Reliability Engineering and System Safety, Elsevier, vol. 239(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Mingjia & Hu, Linmin & Peng, Rui & Bai, Zhuoxin, 2021. "Reliability modeling for repairable circular consecutive-k-out-of-n: F systems with retrial feature," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    2. Li, Mingjia & Hu, Linmin & Wu, Shaomin & Zhao, Bing & Wang, Yan, 2023. "Reliability assessment for consecutive-k-out-of-n: F retrial systems under Poisson shocks," Applied Mathematics and Computation, Elsevier, vol. 448(C).
    3. Wang, Kuo-Hsiung & Wu, Chia-Huang & Yen, Tseng-Chang, 2022. "Comparative cost-benefit analysis of four retrial systems with preventive maintenance and unreliable service station," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    4. Gao, Shan & Wang, Jinting, 2021. "Reliability and availability analysis of a retrial system with mixed standbys and an unreliable repair facility," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    5. Jain, Madhu & Kumar, Pankaj & Singh, Mayank & Gupta, Ritu, 2024. "Cost optimization and reliability analysis of fault tolerant system with service interruption and reboot," Reliability Engineering and System Safety, Elsevier, vol. 249(C).
    6. Zhao, Fei & Peng, Rui & Zhang, Nan, 2023. "Inspection policy optimization for a k-out-of-n/Cl(k′,n′;F) system considering failure dependence: a case study," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    7. Changjiang Lai & Ehmet Kasim & Ahmadjan Muhammadhaji, 2024. "Dynamic Analysis of a Standby System with Retrial Strategies and Multiple Working Vacations," Mathematics, MDPI, vol. 12(24), pages 1-34, December.
    8. Tian-yuan, Ye & Lin-lin, Liu & He-wei, Pang & Yuan-zi, Zhou, 2023. "Bayesian Networks based approach to enhance GO methodology for reliability modeling of multi-state consecutive-k-out-of-n: F system," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    9. Yin, Juan & Cui, Lirong & Balakrishnan, Narayanaswamy, 2022. "Reliability of consecutive-(k,l)-out-of-n: F systems with shared components under non-homogeneous Markov dependence," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    10. Wu, Chia-Huang & Yen, Tseng-Chang & Wang, Kuo-Hsiung, 2021. "Availability and Comparison of Four Retrial Systems with Imperfect Coverage and General Repair Times," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    11. Hu, Zebin & Hu, Linmin & Wu, Shaomin & Yu, Xiaoyun, 2024. "Reliability assessment of discrete-time k/n(G) retrial system based on different failure types and the δ-shock model," Reliability Engineering and System Safety, Elsevier, vol. 251(C).
    12. Zhang, Changzhen & Yang, Jun & Li, Mingjia & Wang, Ning, 2024. "Reliability analysis of a two-dimensional linear consecutive-(r,s)-out-of-(m,n): F repairable system," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    13. Yu, Xiaoyun & Hu, Linmin & Ma, Mengrao, 2023. "Reliability measures of discrete time k-out-of-n: G retrial systems based on Bernoulli shocks," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    14. Yang, Dong-Yuh & Wu, Chia-Huang, 2021. "Evaluation of the availability and reliability of a standby repairable system incorporating imperfect switchovers and working breakdowns," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    15. Marilena Jianu & Leonard Dăuş & Vlad-Florin Drăgoi & Valeriu Beiu, 2023. "The Roots of the Reliability Polynomials of Circular Consecutive- k -out-of- n :F Systems," Mathematics, MDPI, vol. 11(20), pages 1-12, October.
    16. Peiravi, Abdossaber & Nourelfath, Mustapha & Zanjani, Masoumeh Kazemi, 2022. "Redundancy strategies assessment and optimization of k-out-of-n systems based on Markov chains and genetic algorithms," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    17. Qi, Faqun & Yang, Huaqing & Wei, Lai & Shu, Xinting, 2024. "Preventive maintenance policy optimization for a weighted k-out-of-n: G system using the survival signature," Reliability Engineering and System Safety, Elsevier, vol. 249(C).
    18. Ioannis S. Triantafyllou, 2022. "Signature-Based Analysis of the Weighted- r -within-Consecutive- k -out-of- n : F Systems," Mathematics, MDPI, vol. 10(15), pages 1-13, July.
    19. Safaei, Fatemeh & Ahmadi, Jafar & Taghipour, Sharareh, 2022. "A maintenance policy for a k-out-of-n system under enhancing the system’s operating time and safety constraints, and selling the second-hand components," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    20. Ioannis S. Triantafyllou, 2020. "m -Consecutive- k -out-of- n : F Structures with a Single Change Point," Mathematics, MDPI, vol. 8(12), pages 1-14, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:226:y:2022:i:c:s095183202200299x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.