IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v192y2019ics0951832017314205.html
   My bibliography  Save this article

Availability analysis of a general time distribution system with the consideration of maintenance and spares

Author

Listed:
  • Wang, Naichao
  • Li, Mingyuan
  • Xiao, Boping
  • Ma, Lin

Abstract

A one component system with the mean time to failure following general time distributions is used as the subject and which is also affected by corrective maintenance (CM), preventive maintenance (PM), stock level, degrading and failed components repair turnaround. The opportunity of operating CM and PM is governed by the state of the system and also the stocks on hand. By defining the system's state space and the sojourn time of each state, the state equation is derived with the supplementary variable method. Since in the state equation all the time distributions involved are not exponential, the regular method is difficult to resolve. A new method is proposed to cope with this problem. Two important parameters are introduced into the equation and the method proposed in the proposition is perfectly general. By this method the original problem can be transformed in a form as a regular Markov problem. Then the solving process is given and a vector Cauchy sequence of iteration variables is constructed to obtain the final solution. In each calculation the solution of the system's steady-state is derived by the minimum norm theory. Finally, a number of numerical examples are illustrated and some interesting results are derived.

Suggested Citation

  • Wang, Naichao & Li, Mingyuan & Xiao, Boping & Ma, Lin, 2019. "Availability analysis of a general time distribution system with the consideration of maintenance and spares," Reliability Engineering and System Safety, Elsevier, vol. 192(C).
    • Handle: RePEc:eee:reensy:v:192:y:2019:i:c:s0951832017314205
    DOI: 10.1016/j.ress.2018.06.025
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832017314205
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2018.06.025?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yu Liu & Yanfeng Li & Hong-Zhong Huang & Ming Zuo & Zhanquan Sun, 2010. "Optimal preventive maintenance policy under fuzzy Bayesian reliability assessment environments," IISE Transactions, Taylor & Francis Journals, vol. 42(10), pages 734-745.
    2. Kijima, Masaaki & Morimura, Hidenori & Suzuki, Yasusuke, 1988. "Periodical replacement problem without assuming minimal repair," European Journal of Operational Research, Elsevier, vol. 37(2), pages 194-203, November.
    3. Sleptchenko, Andrei & van der Heijden, Matthieu, 2016. "Joint optimization of redundancy level and spare part inventories," Reliability Engineering and System Safety, Elsevier, vol. 153(C), pages 64-74.
    4. Alfredsson, Patrik, 1997. "Optimization of multi-echelon repairable item inventory systems with simultaneous location of repair facilities," European Journal of Operational Research, Elsevier, vol. 99(3), pages 584-595, June.
    5. Pascual, Rodrigo & Santelices, Gabriel & Lüer-Villagra, Armin & Vera, Jorge & Cawley, Alejandro Mac, 2017. "Optimal repairable spare-parts procurement policy under total business volume discount environment," Reliability Engineering and System Safety, Elsevier, vol. 159(C), pages 276-282.
    6. de Castro, Hélio Fiori & Cavalca, Katia Lucchesi, 2006. "Maintenance resources optimization applied to a manufacturing system," Reliability Engineering and System Safety, Elsevier, vol. 91(4), pages 413-420.
    7. Sarkar, Jyotirmoy & Li, Fang, 2006. "Limiting average availability of a system supported by several spares and several repair facilities," Statistics & Probability Letters, Elsevier, vol. 76(18), pages 1965-1974, December.
    8. Savita Garg & Jai Singh & D.V. Singh, 2010. "Availability and maintenance scheduling of a repairable block-board manufacturing system," International Journal of Reliability and Safety, Inderscience Enterprises Ltd, vol. 4(1), pages 104-118.
    9. G. J. Feeney & C. C. Sherbrooke, 1966. "The (S - 1, S) Inventory Policy Under Compound Poisson Demand," Management Science, INFORMS, vol. 12(5), pages 391-411, January.
    10. Richard Barlow & Larry Hunter, 1960. "Optimum Preventive Maintenance Policies," Operations Research, INFORMS, vol. 8(1), pages 90-100, February.
    11. Bin Liu & Min Xie & Way Kuo, 2016. "Reliability modeling and preventive maintenance of load-sharing systemswith degrading components," IISE Transactions, Taylor & Francis Journals, vol. 48(8), pages 699-709, August.
    12. Levner, Eugene & Perlman, Yael & Cheng, T.C.E. & Levner, Ilya, 2011. "A network approach to modeling the multi-echelon spare-part inventory system with backorders and interval-valued demand," International Journal of Production Economics, Elsevier, vol. 132(1), pages 43-51, July.
    13. Nenes, George & Panagiotidou, Sofia & Tagaras, George, 2010. "Inventory management of multiple items with irregular demand: A case study," European Journal of Operational Research, Elsevier, vol. 205(2), pages 313-324, September.
    14. Chuen-Horng Lin & Jau-Chuan Ke & Hsin-I Huang, 2012. "Reliability-based measures for a system with an uncertain parameter environment," International Journal of Systems Science, Taylor & Francis Journals, vol. 43(6), pages 1146-1156.
    15. Mohammed A. Hajeeh, 2011. "Reliability and availability of a standby system with common cause failure," International Journal of Operational Research, Inderscience Enterprises Ltd, vol. 11(3), pages 343-363.
    16. Costantino, Francesco & Di Gravio, Giulio & Tronci, Massimo, 2013. "Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 95-101.
    17. John A. Muckstadt, 1973. "A Model for a Multi-Item, Multi-Echelon, Multi-Indenture Inventory System," Management Science, INFORMS, vol. 20(4-Part-I), pages 472-481, December.
    18. Liying Wang & Lirong Cui & Jie Zhang & Jing Peng, 2016. "Reliability evaluation of a Semi-Markov repairable system under alternative environments," Communications in Statistics - Theory and Methods, Taylor & Francis Journals, vol. 45(10), pages 2938-2957, May.
    19. Xing, Liudong & Levitin, Gregory, 2018. "Connectivity modeling and optimization of linear consecutively connected systems with repairable connecting elements," European Journal of Operational Research, Elsevier, vol. 264(2), pages 732-741.
    20. de Smidt-Destombes, Karin S. & van der Heijden, Matthieu C. & van Harten, Aart, 2007. "Availability of k-out-of-N systems under block replacement sharing limited spares and repair capacity," International Journal of Production Economics, Elsevier, vol. 107(2), pages 404-421, June.
    21. Wang, Hongzhou & Pham, Hoang, 2006. "Availability and maintenance of series systems subject to imperfect repair and correlated failure and repair," European Journal of Operational Research, Elsevier, vol. 174(3), pages 1706-1722, November.
    22. Khatab, A. & Nahas, N. & Nourelfath, M., 2009. "Availability of K-out-of-N:G systems with non-identical components subject to repair priorities," Reliability Engineering and System Safety, Elsevier, vol. 94(2), pages 142-151.
    23. Doyen, Laurent & Gaudoin, Olivier & Syamsundar, Annamraju, 2017. "On geometric reduction of age or intensity models for imperfect maintenance," Reliability Engineering and System Safety, Elsevier, vol. 168(C), pages 40-52.
    24. Chiang, Cheng-Hsiung & Chen, Liang-Hsuan, 2007. "Availability allocation and multi-objective optimization for parallel-series systems," European Journal of Operational Research, Elsevier, vol. 180(3), pages 1231-1244, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Turan, Hasan Hüseyin & Atmis, Mahir & Kosanoglu, Fuat & Elsawah, Sondoss & Ryan, Michael J., 2020. "A risk-averse simulation-based approach for a joint optimization of workforce capacity, spare part stocks and scheduling priorities in maintenance planning," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    2. Kalantari, Somayeh & Nazemi, Eslam & Masoumi, Behrooz, 2021. "Entropy-based goal-oriented emergence management in self-organizing systems through feedback control loop: A case study in NASA ANTS mission," Reliability Engineering and System Safety, Elsevier, vol. 210(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Amin Yazdekhasti & Yahia Zare Mehrjardi, 2020. "Two-echelon three-indenture warranty distribution network: a hybrid branch and bound, Monte-Carlo approach," Operational Research, Springer, vol. 20(2), pages 1113-1158, June.
    2. Izack Cohen & Morris A. Cohen & Elad Landau, 2017. "On sourcing and stocking policies in a two-echelon, multiple location, repairable parts supply chain," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(6), pages 617-629, June.
    3. Qin, Xuwei & Shao, Lusheng & Jiang, Zhong-Zhong, 2020. "Contract design for equipment after-sales service with business interruption insurance," European Journal of Operational Research, Elsevier, vol. 284(1), pages 176-187.
    4. Driessen, M.A. & van Houtum, G.J. & Zijm, W.H.M. & Rustenburg, W.D., 2020. "Capacity assignment in repair shops with high material uncertainty," International Journal of Production Economics, Elsevier, vol. 221(C).
    5. Patriarca, Riccardo & Costantino, Francesco & Di Gravio, Giulio & Tronci, Massimo, 2016. "Inventory optimization for a customer airline in a Performance Based Contract," Journal of Air Transport Management, Elsevier, vol. 57(C), pages 206-216.
    6. Parvaneh Samouei & Amir Kheirkhah & Parviz Fattahi, 2015. "A network approach modeling of multi-echelon spare-part inventory system with backorders and quantity discount," Annals of Operations Research, Springer, vol. 226(1), pages 551-563, March.
    7. García-Benito, Juan Carlos & Martín-Peña, María-Luz, 2021. "A redistribution model with minimum backorders of spare parts: A proposal for the defence sector," European Journal of Operational Research, Elsevier, vol. 291(1), pages 178-193.
    8. Toledo, Maria Luíza Guerra de & Freitas, Marta A. & Colosimo, Enrico A. & Gilardoni, Gustavo L., 2015. "ARA and ARI imperfect repair models: Estimation, goodness-of-fit and reliability prediction," Reliability Engineering and System Safety, Elsevier, vol. 140(C), pages 107-115.
    9. Turan, Hasan Hüseyin & Atmis, Mahir & Kosanoglu, Fuat & Elsawah, Sondoss & Ryan, Michael J., 2020. "A risk-averse simulation-based approach for a joint optimization of workforce capacity, spare part stocks and scheduling priorities in maintenance planning," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    10. Fouladirad, Mitra & Paroissin, Christian & Grall, Antoine, 2018. "Sensitivity of optimal replacement policies to lifetime parameter estimates," European Journal of Operational Research, Elsevier, vol. 266(3), pages 963-975.
    11. Kathryn E. Caggiano & John A. Muckstadt & James A. Rappold, 2006. "Integrated Real-Time Capacity and Inventory Allocation for Reparable Service Parts in a Two-Echelon Supply System," Manufacturing & Service Operations Management, INFORMS, vol. 8(3), pages 292-319, August.
    12. Safaei, Fatemeh & Ahmadi, Jafar & Balakrishnan, N., 2019. "A repair and replacement policy for repairable systems based on probability and mean of profits," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 143-152.
    13. Nowicki, David R. & Randall, Wesley S. & Ramirez-Marquez, Jose Emmanuel, 2012. "Improving the computational efficiency of metric-based spares algorithms," European Journal of Operational Research, Elsevier, vol. 219(2), pages 324-334.
    14. Truong Ba, H. & Cholette, M.E. & Borghesani, P. & Zhou, Y. & Ma, L., 2017. "Opportunistic maintenance considering non-homogenous opportunity arrivals and stochastic opportunity durations," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 151-161.
    15. Jiang, Tao & Liu, Yu, 2020. "Selective maintenance strategy for systems executing multiple consecutive missions with uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    16. Wang, Hongzhou, 2002. "A survey of maintenance policies of deteriorating systems," European Journal of Operational Research, Elsevier, vol. 139(3), pages 469-489, June.
    17. Hu, Qiwei & Boylan, John E. & Chen, Huijing & Labib, Ashraf, 2018. "OR in spare parts management: A review," European Journal of Operational Research, Elsevier, vol. 266(2), pages 395-414.
    18. Alfredsson, Patrik, 1997. "Optimization of multi-echelon repairable item inventory systems with simultaneous location of repair facilities," European Journal of Operational Research, Elsevier, vol. 99(3), pages 584-595, June.
    19. Mamabolo R. M. & Beichelt F. E., 2004. "Maintenance Policies with Minimal Repair," Stochastics and Quality Control, De Gruyter, vol. 19(2), pages 143-166, January.
    20. Yu-kun Chen & Qi Gao & Xiao-bo Su & Shun Fang & Chi-ming Guo, 2018. "Research on optimization of spare parts inventory policy considering maintenance priority," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 9(6), pages 1336-1345, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:192:y:2019:i:c:s0951832017314205. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.