IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v124y2017icp67-73.html
   My bibliography  Save this article

Eco-design for recycled products: Rejuvenating mullite from coal fly ash

Author

Listed:
  • Shi, Jingjing
  • Li, Qiang
  • Li, Huiquan
  • Li, Shaopeng
  • Zhang, Jianbo
  • Shi, Yao

Abstract

Secondary pollution exists extensively in the utilization of industrial solid waste. To reduce environmental risks of building material products recycled from industrial solid waste, a framework of eco-design strategy is established based on the existing eco-design method and life cycle thinking. It focuses on controlling of chemical components by integrating tracking and controlling of toxic components introduced by industrial solid waste. The framework consists of four steps: analysis of raw material applicability, analysis of process control conditions, and safety analysis during product use and final disposal. Raw material requirements are designed including effective components, quality disturbance components, and environmental risk components. Operating condition requirements are given to control flows of selected components in key procedures. Environmental safety of products during use and final disposal under these requirements are tested by simulation experiments. Then a series of eco-design requirements are proposed. The framework is applied in a case study of mullite recycled from coal fly ash and the result shows that the established framework could be feasible for products recycled from industrial solid waste. Nevertheless, the method needs expansion with industrial solid waste properties and product requirements, and steps need optimization if applied in other wastes.

Suggested Citation

  • Shi, Jingjing & Li, Qiang & Li, Huiquan & Li, Shaopeng & Zhang, Jianbo & Shi, Yao, 2017. "Eco-design for recycled products: Rejuvenating mullite from coal fly ash," Resources, Conservation & Recycling, Elsevier, vol. 124(C), pages 67-73.
    • Handle: RePEc:eee:recore:v:124:y:2017:i:c:p:67-73
    DOI: 10.1016/j.resconrec.2017.04.005
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344917300952
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2017.04.005?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yang, T.Y. & Ji, H.B. & Yoon, S.Y. & Kim, B.K. & Park, H.C., 2010. "Porous mullite composite with controlled pore structure processed using a freeze casting of TBA-based coal fly ash slurries," Resources, Conservation & Recycling, Elsevier, vol. 54(11), pages 816-820.
    2. Alonso Movilla, Natalia & Zwolinski, Peggy & Dewulf, Jo & Mathieux, Fabrice, 2016. "A method for manual disassembly analysis to support the ecodesign of electronic displays," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 42-58.
    3. Ardente, Fulvio & Calero Pastor, Maria & Mathieux, Fabrice & Talens Peiró, Laura, 2015. "Analysis of end-of-life treatments of commercial refrigerating appliances: Bridging product and waste policies," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 42-52.
    4. Singh, Malkit & Siddique, Rafat, 2013. "Effect of coal bottom ash as partial replacement of sand on properties of concrete," Resources, Conservation & Recycling, Elsevier, vol. 72(C), pages 20-32.
    5. Krystofik, Mark & Wagner, Jeffrey & Gaustad, Gabrielle, 2015. "Leveraging intellectual property rights to encourage green product design and remanufacturing for sustainable waste management," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 44-54.
    6. Siddique, Rafat, 2009. "Utilization of waste materials and by-products in producing controlled low-strength materials," Resources, Conservation & Recycling, Elsevier, vol. 54(1), pages 1-8.
    7. Kourti, Ioanna & Cheeseman, Christopher R., 2010. "Properties and microstructure of lightweight aggregate produced from lignite coal fly ash and recycled glass," Resources, Conservation & Recycling, Elsevier, vol. 54(11), pages 769-775.
    8. Cetin, Bora & Aydilek, Ahmet H. & Guney, Yucel, 2012. "Leaching of trace metals from high carbon fly ash stabilized highway base layers," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 8-17.
    9. Ardente, Fulvio & Mathieux, Fabrice & Recchioni, Marco, 2014. "Recycling of electronic displays: Analysis of pre-processing and potential ecodesign improvements," Resources, Conservation & Recycling, Elsevier, vol. 92(C), pages 158-171.
    10. Santini, Alessandro & Herrmann, Christoph & Passarini, Fabrizio & Vassura, Ivano & Luger, Tobias & Morselli, Luciano, 2010. "Assessment of Ecodesign potential in reaching new recycling targets," Resources, Conservation & Recycling, Elsevier, vol. 54(12), pages 1128-1134.
    11. Cetin, Bora & Aydilek, Ahmet H., 2013. "pH and fly ash type effect on trace metal leaching from embankment soils," Resources, Conservation & Recycling, Elsevier, vol. 80(C), pages 107-117.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Noureddine Dahmani & Amine Belhadi & Khalid Benhida & Said Elfezazi & Fatima Ezahra Touriki & Yassine Azougagh, 2022. "Integrating lean design and eco-design to improve product design: From literature review to an operational framework," Energy & Environment, , vol. 33(1), pages 189-219, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    2. Alonso Movilla, Natalia & Zwolinski, Peggy & Dewulf, Jo & Mathieux, Fabrice, 2016. "A method for manual disassembly analysis to support the ecodesign of electronic displays," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 42-58.
    3. Sabbaghi, Mostafa & Cade, Willie & Behdad, Sara & Bisantz, Ann M., 2017. "The current status of the consumer electronics repair industry in the U.S.: A survey-based study," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 137-151.
    4. Ameli, Mariam & Mansour, Saeed & Ahmadi-Javid, Amir, 2016. "A multi-objective model for selecting design alternatives and end-of-life options under uncertainty: A sustainable approach," Resources, Conservation & Recycling, Elsevier, vol. 109(C), pages 123-136.
    5. Farel, Romain & Yannou, Bernard & Ghaffari, Asma & Leroy, Yann, 2013. "A cost and benefit analysis of future end-of-life vehicle glazing recycling in France: A systematic approach," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 54-65.
    6. Milovantseva, Natalia & Fitzpatrick, Colin, 2015. "Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 170-177.
    7. Yoshida, Aya & Terazono, Atsushi & Ballesteros, Florencio C. & Nguyen, Duc-Quang & Sukandar, Sunandar & Kojima, Michikazu & Sakata, Shozo, 2016. "E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors," Resources, Conservation & Recycling, Elsevier, vol. 106(C), pages 48-58.
    8. Siqi Che & Rongting Li, 2024. "Comparative Analysis of BYD and Tesla’s CSR Image Construction through CSR Reports," International Journal of Business and Management, Canadian Center of Science and Education, vol. 19(4), pages 106-106, July.
    9. Tianxiang Chen & Ning Yuan & Shanhu Wang & Xinling Zhang & Chaoyang Lin & Xinyue Wu & Qibao Wang & Dongmin Wang, 2024. "Optimization of Controlled Low-Strength Material from Multi-Component Coal-Based Solid Waste," Sustainability, MDPI, vol. 16(4), pages 1-16, February.
    10. Esa, Mohd Reza & Halog, Anthony & Rigamonti, Lucia, 2017. "Strategies for minimizing construction and demolition wastes in Malaysia," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 219-229.
    11. Cetin, Bora & Aydilek, Ahmet H., 2013. "pH and fly ash type effect on trace metal leaching from embankment soils," Resources, Conservation & Recycling, Elsevier, vol. 80(C), pages 107-117.
    12. Berzi, Lorenzo & Delogu, Massimo & Pierini, Marco & Romoli, Filippo, 2016. "Evaluation of the end-of-life performance of a hybrid scooter with the application of recyclability and recoverability assessment methods," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 140-155.
    13. Moura, J.M.B.M. & Gohr Pinheiro, I. & Lischeski, D. & Valle, J.A.B., 2017. "Relation of Brazilian institutional users and technical assistances with electronics and their waste: What has changed?," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 68-75.
    14. Erik G. Hansen & Ferdinand Revellio, 2020. "Circular value creation architectures: Make, ally, buy, or laissez‐faire," Journal of Industrial Ecology, Yale University, vol. 24(6), pages 1250-1273, December.
    15. Nichele Cristina de Freitas Juchneski & Adelaide Maria de Souza Antunes, 2022. "Do the Main Developers of Electrical and Electronic Equipment Comply with the Precepts of the Circular Economy Concepts? A Patent-Based Approach," Sustainability, MDPI, vol. 14(14), pages 1-23, July.
    16. Millet, Dominique & Yvars, Pierre-Alain & Tonnelier, Pierre, 2012. "A method for identifying the worst recycling case: Application on a range of vehicles in the automotive sector," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 1-13.
    17. Habib Al Razi, Khandakar Md, 2016. "Resourceful recycling process of waste desktop computers: A review study," Resources, Conservation & Recycling, Elsevier, vol. 110(C), pages 30-47.
    18. Ruiz-Mercado, Gerardo J. & Gonzalez, Michael A. & Smith, Raymond L. & Meyer, David E., 2017. "A conceptual chemical process for the recycling of Ce, Eu, and Y from LED flat panel displays," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 42-49.
    19. Dissanayake, Geetha & Sinha, Pammi, 2015. "An examination of the product development process for fashion remanufacturing," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 94-102.
    20. Cheung, Wai Ming & Pachisia, Vedant, 2015. "Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 34-41.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:124:y:2017:i:c:p:67-73. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.