IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v183y2017ipbp551-560.html
   My bibliography  Save this article

Managing component reuse in remanufacturing under product diffusion dynamics

Author

Listed:
  • Wang, Wenyuan
  • Wang, Yue
  • Mo, Daniel
  • Tseng, Mitchell M.

Abstract

Rapid changes in technology have precipitated the disposal of increasing amounts of used products and components. To mitigate the side effects of product disposal and decrease the associated costs in the overall value chain, remanufacturing has been advocated as an important approach given its formation of a closed-loop value chain. The key to fully achieving the benefits of remanufacturing lies in the efficient and cost-effective reuse of components from end-of-life products. In this paper, we attempt to model the economic benefits of component reuse in the remanufacturing supply chain and examine how product diffusion dynamics in the market affect the volume of components reused in the single-generation life cycle of a product. We use the Bass model to model the product diffusion process and facilitate analysis of the economic benefits of component reuse and remanufacturing. We then derive the optimal component reuse volume and the corresponding acquisition costs. We present analytical results and case study to show the merits of the proposed methodology and gain insights that can be applied to component reuse decisions in remanufacturing.

Suggested Citation

  • Wang, Wenyuan & Wang, Yue & Mo, Daniel & Tseng, Mitchell M., 2017. "Managing component reuse in remanufacturing under product diffusion dynamics," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 551-560.
    • Handle: RePEc:eee:proeco:v:183:y:2017:i:pb:p:551-560
    DOI: 10.1016/j.ijpe.2016.06.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527316301153
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2016.06.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Roland Geyer & Luk N. Van Wassenhove & Atalay Atasu, 2007. "The Economics of Remanufacturing Under Limited Component Durability and Finite Product Life Cycles," Management Science, INFORMS, vol. 53(1), pages 88-100, January.
    2. John A. Norton & Frank M. Bass, 1987. "A Diffusion Theory Model of Adoption and Substitution for Successive Generations of High-Technology Products," Management Science, INFORMS, vol. 33(9), pages 1069-1086, September.
    3. Leslie Olin Morgan & Ruskin M. Morgan & William L. Moore, 2001. "Quality and Time-to-Market Trade-offs when There Are Multiple Product Generations," Manufacturing & Service Operations Management, INFORMS, vol. 3(2), pages 89-104, June.
    4. Das, Kanchan & Rao Posinasetti, Nageswara, 2015. "Addressing environmental concerns in closed loop supply chain design and planning," International Journal of Production Economics, Elsevier, vol. 163(C), pages 34-47.
    5. Dobos, Imre, 2003. "Optimal production-inventory strategies for a HMMS-type reverse logistics system," International Journal of Production Economics, Elsevier, vol. 81(1), pages 351-360, January.
    6. Atalay Atasu & Miklos Sarvary & Luk N. Van Wassenhove, 2008. "Remanufacturing as a Marketing Strategy," Management Science, INFORMS, vol. 54(10), pages 1731-1746, October.
    7. Kumar, Sameer & Putnam, Valora, 2008. "Cradle to cradle: Reverse logistics strategies and opportunities across three industry sectors," International Journal of Production Economics, Elsevier, vol. 115(2), pages 305-315, October.
    8. Das, Kanchan & Chowdhury, Abdul H., 2012. "Designing a reverse logistics network for optimal collection, recovery and quality-based product-mix planning," International Journal of Production Economics, Elsevier, vol. 135(1), pages 209-221.
    9. He, Yuanjie, 2015. "Acquisition pricing and remanufacturing decisions in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 163(C), pages 48-60.
    10. Frank M. Bass, 1969. "A New Product Growth for Model Consumer Durables," Management Science, INFORMS, vol. 15(5), pages 215-227, January.
    11. Cannella, Salvatore & Bruccoleri, Manfredi & Framinan, Jose M., 2016. "Closed-loop supply chains: What reverse logistics factors influence performance?," International Journal of Production Economics, Elsevier, vol. 175(C), pages 35-49.
    12. Erica Plambeck & Qiong Wang, 2009. "Effects of E-Waste Regulation on New Product Introduction," Management Science, INFORMS, vol. 55(3), pages 333-347, March.
    13. Ayres, Robert & Ferrer, Geraldo & Van Leynseele, Tania, 1997. "Eco-efficiency, asset recovery and remanufacturing," European Management Journal, Elsevier, vol. 15(5), pages 557-574, October.
    14. Laurens G. Debo & L. Beril Toktay & Luk N. Van Wassenhove, 2005. "Market Segmentation and Product Technology Selection for Remanufacturable Products," Management Science, INFORMS, vol. 51(8), pages 1193-1205, August.
    15. Aras, Necati & Aksen, Deniz, 2008. "Locating collection centers for distance- and incentive-dependent returns," International Journal of Production Economics, Elsevier, vol. 111(2), pages 316-333, February.
    16. Östlin, Johan & Sundin, Erik & Björkman, Mats, 2008. "Importance of closed-loop supply chain relationships for product remanufacturing," International Journal of Production Economics, Elsevier, vol. 115(2), pages 336-348, October.
    17. Vijay Mahajan & Eitan Muller & Frank M. Bass, 1995. "Diffusion of New Products: Empirical Generalizations and Managerial Uses," Marketing Science, INFORMS, vol. 14(3_supplem), pages 79-88.
    18. Georgiadis, Patroklos & Athanasiou, Efstratios, 2010. "The impact of two-product joint lifecycles on capacity planning of remanufacturing networks," European Journal of Operational Research, Elsevier, vol. 202(2), pages 420-433, April.
    19. R. Canan Savaskan & Shantanu Bhattacharya & Luk N. Van Wassenhove, 2004. "Closed-Loop Supply Chain Models with Product Remanufacturing," Management Science, INFORMS, vol. 50(2), pages 239-252, February.
    20. Saibal Ray & Tamer Boyaci & Necati Aras, 2005. "Optimal Prices and Trade-in Rebates for Durable, Remanufacturable Products," Manufacturing & Service Operations Management, INFORMS, vol. 7(3), pages 208-228, January.
    21. Kenné, Jean-Pierre & Dejax, Pierre & Gharbi, Ali, 2012. "Production planning of a hybrid manufacturing–remanufacturing system under uncertainty within a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 135(1), pages 81-93.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mehmet Talha Dulman & Surendra M. Gupta, 2018. "Evaluation of Maintenance and EOL Operation Performance of Sensor-Embedded Laptops," Logistics, MDPI, vol. 2(1), pages 1-22, January.
    2. Bayrak, Busra & Guray, Busra & Uzunlar, Nilsu & Nadar, Emre, 2024. "Diffusion control in closed-loop supply chains: Successive product generations," International Journal of Production Economics, Elsevier, vol. 268(C).
    3. Dev, Navin K. & Shankar, Ravi & Swami, Sanjeev, 2020. "Diffusion of green products in industry 4.0: Reverse logistics issues during design of inventory and production planning system," International Journal of Production Economics, Elsevier, vol. 223(C).
    4. Gunasekara, Lahiru & Robb, David J. & Zhang, Abraham, 2023. "Used product acquisition, sorting and disposition for circular supply chains: Literature review and research directions," International Journal of Production Economics, Elsevier, vol. 260(C).
    5. Xu, Xun & Zeng, Shuo & He, Yuanjie, 2017. "The influence of e-services on customer online purchasing behavior toward remanufactured products," International Journal of Production Economics, Elsevier, vol. 187(C), pages 113-125.
    6. Chen, Wenyi & Kucukyazici, Beste & Saenz, Maria Jesus, 2019. "On the joint dynamics of the economic and environmental performances for collective take-back systems," International Journal of Production Economics, Elsevier, vol. 218(C), pages 228-244.
    7. Liangchuan Zhou & Surendra M. Gupta, 2019. "A Pricing and Acquisition Strategy for New and Remanufactured High-Technology Products," Logistics, MDPI, vol. 3(1), pages 1-26, February.
    8. Simonetto, Marco & Sgarbossa, Fabio & Battini, Daria & Govindan, Kannan, 2022. "Closed loop supply chains 4.0: From risks to benefits through advanced technologies. A literature review and research agenda," International Journal of Production Economics, Elsevier, vol. 253(C).
    9. Daniel Y. Mo & Chris Y. T. Ma & Danny C. K. Ho & Yue Wang, 2022. "Design of a Reverse Logistics System with Internet of Things for Service Parts Management," Sustainability, MDPI, vol. 14(19), pages 1-15, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Genc, Talat S. & Giovanni, Pietro De, 2017. "Trade-in and save: A two-period closed-loop supply chain game with price and technology dependent returns," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 514-527.
    2. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    3. Chen, Chialin & Liu, Lucy Qian, 2014. "Pricing and quality decisions and financial incentives for sustainable product design with recycled material content under price leadership," International Journal of Production Economics, Elsevier, vol. 147(PC), pages 666-677.
    4. Fuqiang Zhang & Renyu Zhang, 2018. "Trade-in Remanufacturing, Customer Purchasing Behavior, and Government Policy," Manufacturing & Service Operations Management, INFORMS, vol. 20(4), pages 601-616, October.
    5. Ma, Peng & Gong, Yeming & Mirchandani, Prakash, 2020. "Trade-in for remanufactured products: Pricing with double reference effects," International Journal of Production Economics, Elsevier, vol. 230(C).
    6. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    7. Wu, Cheng-Han, 2015. "Strategic and operational decisions under sales competition and collection competition for end-of-use products in remanufacturing," International Journal of Production Economics, Elsevier, vol. 169(C), pages 11-20.
    8. Xiong, Yu & Zhou, Yu & Li, Gendao & Chan, Hing-Kai & Xiong, Zhongkai, 2013. "Don’t forget your supplier when remanufacturing," European Journal of Operational Research, Elsevier, vol. 230(1), pages 15-25.
    9. Liangchuan Zhou & Surendra M. Gupta, 2019. "A Pricing and Acquisition Strategy for New and Remanufactured High-Technology Products," Logistics, MDPI, vol. 3(1), pages 1-26, February.
    10. Zhou, Qin & Meng, Chao & Yuen, Kum Fai & Sheu, Jiuh-Biing, 2021. "Remanufacturing authorization strategy for an original equipment manufacturer-contract manufacturer supply chain: Cooperation or competition?," International Journal of Production Economics, Elsevier, vol. 240(C).
    11. Aydin, R. & Kwong, C.K. & Ji, P., 2015. "A novel methodology for simultaneous consideration of remanufactured and new products in product line design," International Journal of Production Economics, Elsevier, vol. 169(C), pages 127-140.
    12. Tong Shu & Yongjian Wang & Shou Chen & Shouyang Wang & Kin Keung Lai & Yan Yang, 2017. "Decisions on Remanufacturing with WTP Disparity and Recycling Competition under Government Subsidies," Sustainability, MDPI, vol. 9(9), pages 1-29, August.
    13. Ghosh, Debabrata & Shah, Janat, 2012. "A comparative analysis of greening policies across supply chain structures," International Journal of Production Economics, Elsevier, vol. 135(2), pages 568-583.
    14. Jayashree Mahajan & Asoo J Vakharia, 2016. "Waste Management: A Reverse Supply Chain Perspective," Vikalpa: The Journal for Decision Makers, , vol. 41(3), pages 197-208, September.
    15. De Giovanni, Pietro & Zaccour, Georges, 2019. "Optimal quality improvements and pricing strategies with active and passive product returns," Omega, Elsevier, vol. 88(C), pages 248-262.
    16. Zu-Jun Ma & Qin Zhou & Ying Dai & Gao-Feng Guan, 2018. "To License or Not to License Remanufacturing Business?," Sustainability, MDPI, vol. 10(2), pages 1-21, January.
    17. De Giovanni, Pietro & Reddy, Puduru V. & Zaccour, Georges, 2016. "Incentive strategies for an optimal recovery program in a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 249(2), pages 605-617.
    18. Xiong, Yu & Zhao, Quanwu & Zhou, Yu, 2016. "Manufacturer-remanufacturing vs supplier-remanufacturing in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 176(C), pages 21-28.
    19. Xiaohua Han & Ying Shen & Yiwen Bian, 2020. "Optimal recovery strategy of manufacturers: Remanufacturing products or recycling materials?," Annals of Operations Research, Springer, vol. 290(1), pages 463-489, July.
    20. Yenipazarli, Arda, 2016. "Managing new and remanufactured products to mitigate environmental damage under emissions regulation," European Journal of Operational Research, Elsevier, vol. 249(1), pages 117-130.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:183:y:2017:i:pb:p:551-560. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.