IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v86y2015icp589-602.html
   My bibliography  Save this article

Key issues and solutions in a district heating system using low-grade industrial waste heat

Author

Listed:
  • Fang, Hao
  • Xia, Jianjun
  • Jiang, Yi

Abstract

Industrial waste heat is increasingly being recognized as an important source of heat for DH (district heating) systems in cold regions to fill shortfalls in heating requirements, while consuming less fossil energy than with conventional heating sources. Most existing cases of industrial waste heat utilization for heating merely focus on heat recovery from a single waste heat source for heating either in the factory in which the heat is generated or other buildings in the vicinity. The purpose of this paper is to discuss the key issues related to a DH system using two or more kinds of low-grade industrial waste heat, at a temperature between 20 °C and 90 °C, for users a long distance away from the heat sources, including the collection and integration of multiple-grade waste heat sources, long-distance delivery of waste heat, and peak shaving of the system. Solutions to these three issues are proposed to increase the efficiency of the system and for further and better promotion of such a system: 1) “Tangency technology” is designed and applied to find the optimal method of collecting heat from multiple waste heat sources. 2) Lowering the temperature of the return water on the primary side has been proven to be crucial to the collection and long-distance delivery of industrial waste heat. 3) Systems integrating both industrial waste heat and fossil-fuel heat are depicted. Industrial waste heat always provides the base load for the DH system, while the fossil-fuel heat acts as the peak shaver. Lastly, a case study undertaken in Chifeng in northern China demonstrates how these solutions act in a first-ever DH demonstration project using multiple sources of waste heat from a copper smelter. In all, 390,000 GJ of waste heat was recovered, 35,000 t of CO2 emission was reduced, and over 150,000 t of water was saved.

Suggested Citation

  • Fang, Hao & Xia, Jianjun & Jiang, Yi, 2015. "Key issues and solutions in a district heating system using low-grade industrial waste heat," Energy, Elsevier, vol. 86(C), pages 589-602.
    • Handle: RePEc:eee:energy:v:86:y:2015:i:c:p:589-602
    DOI: 10.1016/j.energy.2015.04.052
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215005071
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.04.052?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ebrahim, Mubarak & Kawari, Al-, 2000. "Pinch technology: an efficient tool for chemical-plant energy and capital-cost saving," Applied Energy, Elsevier, vol. 65(1-4), pages 45-49, April.
    2. Li, Hongwei & Svendsen, Svend, 2012. "Energy and exergy analysis of low temperature district heating network," Energy, Elsevier, vol. 45(1), pages 237-246.
    3. Fang, Hao & Xia, Jianjun & Zhu, Kan & Su, Yingbo & Jiang, Yi, 2013. "Industrial waste heat utilization for low temperature district heating," Energy Policy, Elsevier, vol. 62(C), pages 236-246.
    4. Svensson, Inger-Lise & Jönsson, Johanna & Berntsson, Thore & Moshfegh, Bahram, 2008. "Excess heat from kraft pulp mills: Trade-offs between internal and external use in the case of Sweden--Part 1: Methodology," Energy Policy, Elsevier, vol. 36(11), pages 4178-4185, November.
    5. Zhang, Lun & Liu, Xiaohua & Jiang, Yi, 2013. "Application of entransy in the analysis of HVAC systems in buildings," Energy, Elsevier, vol. 53(C), pages 332-342.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Jingyi & Wang, Zhe & Zhou, Ding & Sun, Kaiyu, 2019. "Key issues and novel optimization approaches of industrial waste heat recovery in district heating systems," Energy, Elsevier, vol. 188(C).
    2. Li, Yemao & Pan, Wenbiao & Xia, Jianjun & Jiang, Yi, 2019. "Combined heat and water system for long-distance heat transportation," Energy, Elsevier, vol. 172(C), pages 401-408.
    3. Fang, Hao & Xia, Jianjun & Zhu, Kan & Su, Yingbo & Jiang, Yi, 2013. "Industrial waste heat utilization for low temperature district heating," Energy Policy, Elsevier, vol. 62(C), pages 236-246.
    4. Karner, Katharina & Theissing, Matthias & Kienberger, Thomas, 2017. "Modeling of energy efficiency increase of urban areas through synergies with industries," Energy, Elsevier, vol. 136(C), pages 201-209.
    5. Lygnerud, Kristina & Werner, Sven, 2018. "Risk assessment of industrial excess heat recovery in district heating systems," Energy, Elsevier, vol. 151(C), pages 430-441.
    6. Zhang, Lipeng & Xia, Jianjun & Thorsen, Jan Eric & Gudmundsson, Oddgeir & Li, Hongwei & Svendsen, Svend, 2016. "Technical, economic and environmental investigation of using district heating to prepare domestic hot water in Chinese multi-storey buildings," Energy, Elsevier, vol. 116(P1), pages 281-292.
    7. Lund, Henrik & Werner, Sven & Wiltshire, Robin & Svendsen, Svend & Thorsen, Jan Eric & Hvelplund, Frede & Mathiesen, Brian Vad, 2014. "4th Generation District Heating (4GDH)," Energy, Elsevier, vol. 68(C), pages 1-11.
    8. Dominković, D.F. & Bačeković, I. & Sveinbjörnsson, D. & Pedersen, A.S. & Krajačić, G., 2017. "On the way towards smart energy supply in cities: The impact of interconnecting geographically distributed district heating grids on the energy system," Energy, Elsevier, vol. 137(C), pages 941-960.
    9. Guelpa, Elisa & Bischi, Aldo & Verda, Vittorio & Chertkov, Michael & Lund, Henrik, 2019. "Towards future infrastructures for sustainable multi-energy systems: A review," Energy, Elsevier, vol. 184(C), pages 2-21.
    10. Yang, Sheng & Shao, Xue-Feng & Luo, Jia-Hao & Baghaei Oskouei, Seyedmohsen & Bayer, Özgür & Fan, Li-Wu, 2023. "A novel cascade latent heat thermal energy storage system consisting of erythritol and paraffin wax for deep recovery of medium-temperature industrial waste heat," Energy, Elsevier, vol. 265(C).
    11. Capone, Martina & Guelpa, Elisa & Verda, Vittorio, 2023. "Potential for supply temperature reduction of existing district heating substations," Energy, Elsevier, vol. 285(C).
    12. Guelpa, Elisa & Verda, Vittorio, 2019. "Compact physical model for simulation of thermal networks," Energy, Elsevier, vol. 175(C), pages 998-1008.
    13. Volkova, Anna & Krupenski, Igor & Ledvanov, Aleksandr & Hlebnikov, Aleksandr & Lepiksaar, Kertu & Latõšov, Eduard & Mašatin, Vladislav, 2020. "Energy cascade connection of a low-temperature district heating network to the return line of a high-temperature district heating network," Energy, Elsevier, vol. 198(C).
    14. Markus Fritz & Ali Aydemir & Liselotte Schebek, 2022. "How Much Excess Heat Might Be Used in Buildings? A Spatial Analysis at the Municipal Level in Germany," Energies, MDPI, vol. 15(17), pages 1-17, August.
    15. Hafezi, Reza & Akhavan, AmirNaser & Pakseresht, Saeed & Wood, David A., 2019. "A Layered Uncertainties Scenario Synthesizing (LUSS) model applied to evaluate multiple potential long-run outcomes for Iran's natural gas exports," Energy, Elsevier, vol. 169(C), pages 646-659.
    16. Jiang, X.S. & Jing, Z.X. & Li, Y.Z. & Wu, Q.H. & Tang, W.H., 2014. "Modelling and operation optimization of an integrated energy based direct district water-heating system," Energy, Elsevier, vol. 64(C), pages 375-388.
    17. Zhang, Lipeng & Gudmundsson, Oddgeir & Thorsen, Jan Eric & Li, Hongwei & Li, Xiaopeng & Svendsen, Svend, 2016. "Method for reducing excess heat supply experienced in typical Chinese district heating systems by achieving hydraulic balance and improving indoor air temperature control at the building level," Energy, Elsevier, vol. 107(C), pages 431-442.
    18. Wang, Hai & Wang, Haiying & Zhu, Tong & Deng, Wanli, 2017. "A novel model for steam transportation considering drainage loss in pipeline networks," Applied Energy, Elsevier, vol. 188(C), pages 178-189.
    19. Bertrand, Alexandre & Mian, Alberto & Kantor, Ivan & Aggoune, Riad & Maréchal, François, 2019. "Regional waste heat valorisation: A mixed integer linear programming method for energy service companies," Energy, Elsevier, vol. 167(C), pages 454-468.
    20. Sandvall, Akram Fakhri & Ahlgren, Erik O. & Ekvall, Tomas, 2017. "Low-energy buildings heat supply–Modelling of energy systems and carbon emissions impacts," Energy Policy, Elsevier, vol. 111(C), pages 371-382.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:86:y:2015:i:c:p:589-602. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.