IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v83y2015icp576-582.html
   My bibliography  Save this article

A novel approach for predicting thermal effects of gas cavitation in hydraulic circuits

Author

Listed:
  • Zhou, Junjie
  • Wei, Chao
  • Hu, Jibin

Abstract

This paper describes a novel approach for predicting the thermal impact of gas cavitation in hydraulic circuits. The developed model utilizes a thermal-hydraulic modeling concept for calculating the oil temperatures inside the control volumes divided from the circuit, taking into account the gas evolution process in the cavitating pump. The heat generated by cavitation is interpreted as the result of the power loss consumed for compressing the air bubbles. An innovative equivalent method is proposed to calculate the total heat power rate induced by cavitation based on the previously developed gas evolution equation. In particular, simulation model for an open circuit inclusive of gear pump is built and experimental tests are carried out to verify the potentials of the proposed model. The simulated tank oil temperature is proven to have a good match with the measured data for both with cavitation and without cavitation cases, thus confirming the new approach. The present work allows a deeper understanding of cavitation effects on the overall performance of hydraulic circuit from an energetic point of view.

Suggested Citation

  • Zhou, Junjie & Wei, Chao & Hu, Jibin, 2015. "A novel approach for predicting thermal effects of gas cavitation in hydraulic circuits," Energy, Elsevier, vol. 83(C), pages 576-582.
  • Handle: RePEc:eee:energy:v:83:y:2015:i:c:p:576-582
    DOI: 10.1016/j.energy.2015.02.065
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215002200
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2015.02.065?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wu, Wei & Hu, Jibin & Jing, Chongbo & Jiang, Zhonglin & Yuan, Shihua, 2014. "Investigation of energy efficient hydraulic hybrid propulsion system for automobiles," Energy, Elsevier, vol. 73(C), pages 497-505.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhou, Junjie & Jing, Chongbo & Wu, Wei, 2020. "Energy efficiency modeling and validation of a novel swash plate-rotating type hydraulic transformer," Energy, Elsevier, vol. 193(C).
    2. Bao, Qianqian & Zhou, Junjie & Jing, Chongbo & Zhao, Huipeng & Wu, Yi & Zhang, Zhu, 2022. "Nonlinear dynamic model for the free rotor of the swash plate-rotating hydraulic transformer," Energy, Elsevier, vol. 261(PB).
    3. Ge, Mingming & Manikkam, Pratulya & Ghossein, Joe & Kumar Subramanian, Roshan & Coutier-Delgosha, Olivier & Zhang, Guangjian, 2022. "Dynamic mode decomposition to classify cavitating flow regimes induced by thermodynamic effects," Energy, Elsevier, vol. 254(PC).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hyukjoon Kwon & Monika Ivantysynova, 2020. "System Characteristics Analysis for Energy Management of Power-Split Hydraulic Hybrids," Energies, MDPI, vol. 13(7), pages 1-23, April.
    2. Kwon, Hyukjoon & Ivantysynova, Monika, 2021. "Experimental and theoretical studies on energy characteristics of hydraulic hybrids for thermal management," Energy, Elsevier, vol. 223(C).
    3. Zhou, Junjie & Jing, Chongbo & Wu, Wei, 2020. "Energy efficiency modeling and validation of a novel swash plate-rotating type hydraulic transformer," Energy, Elsevier, vol. 193(C).
    4. Wu, Wei & Hu, Jibin & Yuan, Shihua & Di, Chongfeng, 2016. "A hydraulic hybrid propulsion method for automobiles with self-adaptive system," Energy, Elsevier, vol. 114(C), pages 683-692.
    5. Bao, Qianqian & Zhou, Junjie & Jing, Chongbo & Zhao, Huipeng & Wu, Yi & Zhang, Zhu, 2022. "Nonlinear dynamic model for the free rotor of the swash plate-rotating hydraulic transformer," Energy, Elsevier, vol. 261(PB).
    6. Kwon, Hyukjoon & Sprengel, Michael & Ivantysynova, Monika, 2016. "Thermal modeling of a hydraulic hybrid vehicle transmission based on thermodynamic analysis," Energy, Elsevier, vol. 116(P1), pages 650-660.
    7. Nie, Chunhui & Shao, Yimin & Mechefske, Chris K. & Cheng, Min & Wang, Liming, 2021. "Power distribution method for a parallel hydraulic-pneumatic hybrid system using a piecewise function," Energy, Elsevier, vol. 233(C).
    8. Liu, Huanlong & Jiang, Yue & Li, Shun, 2019. "Design and downhill speed control of an electric-hydrostatic hydraulic hybrid powertrain in battery-powered rail vehicles," Energy, Elsevier, vol. 187(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:83:y:2015:i:c:p:576-582. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.