IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v61y2013icp381-396.html
   My bibliography  Save this article

State space model extraction of thermohydraulic systems – Part II: A linear graph approach applied to a Brayton cycle-based power conversion unit

Author

Listed:
  • Uren, Kenneth Richard
  • van Schoor, George

Abstract

This second paper in a two part series presents the application of a developed state space model extraction methodology applied to a Brayton cycle-based PCU (power conversion unit) of a PBMR (pebble bed modular reactor). The goal is to investigate if the state space extraction methodology can cope with larger and more complex thermohydraulic systems. In Part I the state space model extraction methodology for the purpose of control was described in detail and a state space representation was extracted for a U-tube system to illustrate the concept. In this paper a 25th order nonlinear state space representation in terms of the different energy domains is extracted. This state space representation is solved and the responses of a number of important states are compared with results obtained from a PBMR PCU Flownex® model. Flownex® is a validated thermo fluid simulation software package. The results show that the state space model closely resembles the dynamics of the PBMR PCU. This kind of model may be used for nonlinear MIMO (multi-input, multi-output) type of control strategies. However, there is still a need for linear state space models since many control system design and analysis techniques require a linear state space model. This issue is also addressed in this paper by showing how a linear state space model can be derived from the extracted nonlinear state space model. The linearised state space model is also validated by comparing the state space model to an existing linear Simulink® model of the PBMR PCU system.

Suggested Citation

  • Uren, Kenneth Richard & van Schoor, George, 2013. "State space model extraction of thermohydraulic systems – Part II: A linear graph approach applied to a Brayton cycle-based power conversion unit," Energy, Elsevier, vol. 61(C), pages 381-396.
    • Handle: RePEc:eee:energy:v:61:y:2013:i:c:p:381-396
    DOI: 10.1016/j.energy.2013.08.052
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421300741X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.08.052?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ghiaus, Christian, 2013. "Causality issue in the heat balance method for calculating the design heating and cooling load," Energy, Elsevier, vol. 50(C), pages 292-301.
    2. Vujić, Jasmina & Bergmann, Ryan M. & Škoda, Radek & Miletić, Marija, 2012. "Small modular reactors: Simpler, safer, cheaper?," Energy, Elsevier, vol. 45(1), pages 288-295.
    3. Uren, K.R. & van Schoor, G., 2013. "State space model extraction of thermohydraulic systems – Part I: A linear graph approach," Energy, Elsevier, vol. 61(C), pages 368-380.
    4. Rovira, Antonio & Muñoz-Antón, Javier & Montes, María José & Martínez-Val, José María, 2013. "Optimization of Brayton cycles for low-to-moderate grade thermal energy sources," Energy, Elsevier, vol. 55(C), pages 403-416.
    5. Zhao, Lei & Michelsen, Finn Are & Foss, Bjarne, 2013. "Control design and dynamic simulation of an HMR pre-combustion power cycle based on economic measures," Energy, Elsevier, vol. 51(C), pages 171-183.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ghiaus, Christian & Ahmad, Naveed, 2020. "Thermal circuits assembling and state-space extraction for modelling heat transfer in buildings," Energy, Elsevier, vol. 195(C).
    2. Jānis Krūmiņš & Māris Kļaviņš, 2023. "Investigating the Potential of Nuclear Energy in Achieving a Carbon-Free Energy Future," Energies, MDPI, vol. 16(9), pages 1-31, April.
    3. Popov, Dimityr & Borissova, Ana, 2017. "Innovative configuration of a hybrid nuclear-solar tower power plant," Energy, Elsevier, vol. 125(C), pages 736-746.
    4. Valdés, Manuel & Abbas, Rubén & Rovira, Antonio & Martín-Aragón, Javier, 2016. "Thermal efficiency of direct, inverse and sCO2 gas turbine cycles intended for small power plants," Energy, Elsevier, vol. 100(C), pages 66-72.
    5. Zhe Dong & Miao Liu & Di Jiang & Xiaojin Huang & Yajun Zhang & Zuoyi Zhang, 2018. "Automatic Generation Control of Nuclear Heating Reactor Power Plants," Energies, MDPI, vol. 11(10), pages 1-18, October.
    6. Zhe Dong, 2014. "Saturated Adaptive Output-Feedback Power-Level Control for Modular High Temperature Gas-Cooled Reactors," Energies, MDPI, vol. 7(11), pages 1-20, November.
    7. Muñoz, Marta & Rovira, Antonio & Sánchez, Consuelo & Montes, María José, 2017. "Off-design analysis of a Hybrid Rankine-Brayton cycle used as the power block of a solar thermal power plant," Energy, Elsevier, vol. 134(C), pages 369-381.
    8. Erwan Hermawan & Usman Sudjadi, 2022. "Integrated Nuclear-Renewable Energy System for Industrialization in West Nusa Tenggara Province, Indonesia: Economic, Potential Site, and Policy Recommendation," International Journal of Energy Economics and Policy, Econjournals, vol. 12(4), pages 146-159, July.
    9. Wang, Qiang & Li, Rongrong & He, Gang, 2018. "Research status of nuclear power: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 90-96.
    10. Knez, Ž. & Markočič, E. & Leitgeb, M. & Primožič, M. & Knez Hrnčič, M. & Škerget, M., 2014. "Industrial applications of supercritical fluids: A review," Energy, Elsevier, vol. 77(C), pages 235-243.
    11. Zhao, Chuandang & Xu, Jiuping & Wang, Fengjuan & Xie, Guo & Tan, Cheng, 2024. "Economic–environmental trade-offs based support policy towards optimal planning of wastewater heat recovery," Applied Energy, Elsevier, vol. 364(C).
    12. Black, Geoffrey A. & Aydogan, Fatih & Koerner, Cassandra L., 2019. "Economic viability of light water small modular nuclear reactors: General methodology and vendor data," Renewable and Sustainable Energy Reviews, Elsevier, vol. 103(C), pages 248-258.
    13. Zaharil, Hafiz Aman, 2021. "An investigation on the usage of different supercritical fluids in parabolic trough solar collector," Renewable Energy, Elsevier, vol. 168(C), pages 676-691.
    14. Liu, Yanyan & Huang, Guohe & Chen, Jiapei & Zhang, Xiaoyue & Zheng, Xiaogui & Zhai, Mengyu, 2022. "Development of an optimization-aided small modular reactor siting model – A case study of Saskatchewan, Canada," Applied Energy, Elsevier, vol. 305(C).
    15. Carless, Travis S. & Griffin, W. Michael & Fischbeck, Paul S., 2016. "The environmental competitiveness of small modular reactors: A life cycle study," Energy, Elsevier, vol. 114(C), pages 84-99.
    16. Nian, Victor & Mignacca, Benito & Locatelli, Giorgio, 2022. "Policies toward net-zero: Benchmarking the economic competitiveness of nuclear against wind and solar energy," Applied Energy, Elsevier, vol. 320(C).
    17. Raillon, L. & Ghiaus, C., 2018. "An efficient Bayesian experimental calibration of dynamic thermal models," Energy, Elsevier, vol. 152(C), pages 818-833.
    18. Carless, Travis S. & Talabi, Sola M. & Fischbeck, Paul S., 2019. "Risk and regulatory considerations for small modular reactor emergency planning zones based on passive decontamination potential," Energy, Elsevier, vol. 167(C), pages 740-756.
    19. Ibarra, Mercedes & Rovira, Antonio & Alarcón-Padilla, Diego-César & Blanco, Julián, 2014. "Performance of a 5kWe Organic Rankine Cycle at part-load operation," Applied Energy, Elsevier, vol. 120(C), pages 147-158.
    20. Wu, Chuang & Yan, Xiao-jiang & Wang, Shun-sen & Bai, Kun-lun & Di, Juan & Cheng, Shang-fang & Li, Jun, 2016. "System optimisation and performance analysis of CO2 transcritical power cycle for waste heat recovery," Energy, Elsevier, vol. 100(C), pages 391-400.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:61:y:2013:i:c:p:381-396. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.