IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v51y2013icp468-474.html
   My bibliography  Save this article

Experimental investigation of novel heat exchanger for low temperature lift heat pump

Author

Listed:
  • Lee, Hoseong
  • Hwang, Yunho
  • Radermacher, Reinhard
  • Chun, Ho-Hwan

Abstract

In this paper, the thermal and hydraulic performance of a novel low temperature lift heat exchanger (LTLHX) was experimentally investigated. The novel LTLHX was developed to improve the performance of the conventional plate type heat exchanger (PHX) under low temperature lift operating conditions. The optimized novel LTLHX was fabricated and investigated experimentally with various operating conditions. The heat transfer coefficient correlation and friction factor correlation of the water-side in the novel LTLHX were formulated from the experimental data. The overall heat transfer coefficient of the novel LTLHX with ammonia ranged from 1300 to 2000 W K−1 m−2, and the pressure drop per length of the water-side ranged from 4 to 10 kPa m−1. The refrigerant-side heat transfer coefficient ranged from 2900 to 5000 W K−1 m−2, and water-side heat transfer coefficient ranged from 3900 to 5100 W K−1 m−2. The overall heat transfer performance of the novel LTLHX was more than double that of the PHX at the same operating conditions. Moreover, the water-side pressure drop of the novel heat exchanger was drastically lower than that of the PHX. It was due to the balanced thermal and hydraulic performance of the novel heat exchanger.

Suggested Citation

  • Lee, Hoseong & Hwang, Yunho & Radermacher, Reinhard & Chun, Ho-Hwan, 2013. "Experimental investigation of novel heat exchanger for low temperature lift heat pump," Energy, Elsevier, vol. 51(C), pages 468-474.
    • Handle: RePEc:eee:energy:v:51:y:2013:i:c:p:468-474
    DOI: 10.1016/j.energy.2013.01.011
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544213000297
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.01.011?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lee, Hoseong & Saleh, Khaled & Hwang, Yunho & Radermacher, Reinhard, 2012. "Optimization of novel heat exchanger design for the application to low temperature lift heat pump," Energy, Elsevier, vol. 42(1), pages 204-212.
    2. Sheik Ismail, L. & Velraj, R. & Ranganayakulu, C., 2010. "Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers--A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 478-485, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Cheng, XueTao, 2013. "Entropy resistance minimization: An alternative method for heat exchanger analyses," Energy, Elsevier, vol. 58(C), pages 672-678.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Long & Wang, Mingqing & Chen, Yu, 2019. "A practical research on capillaries used as a front-end heat exchanger of seawater-source heat pump," Energy, Elsevier, vol. 171(C), pages 170-179.
    2. Hamid, Mohammed O.A. & Zhang, Bo & Yang, Luopeng, 2014. "Application of field synergy principle for optimization fluid flow and convective heat transfer in a tube bundle of a pre-heater," Energy, Elsevier, vol. 76(C), pages 241-253.
    3. Fabio Battaglia & Martinus Arie & Xiang Zhang & Michael Ohadi & Amir Shooshtari, 2023. "Experimental Characterization of an Additively Manufactured Inconel 718 Heat Exchanger for High-Temperature Applications," Energies, MDPI, vol. 16(10), pages 1-20, May.
    4. Gaoliang Liao & Zhizhou Li & Feng Zhang & Lijun Liu & Jiaqiang E, 2021. "A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers," Energies, MDPI, vol. 14(19), pages 1-35, September.
    5. Li, Qi & Flamant, Gilles & Yuan, Xigang & Neveu, Pierre & Luo, Lingai, 2011. "Compact heat exchangers: A review and future applications for a new generation of high temperature solar receivers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 4855-4875.
    6. Jingang Yang & Yaohua Zhao & Aoxue Chen & Zhenhua Quan, 2019. "Thermal Performance of a Low-Temperature Heat Exchanger Using a Micro Heat Pipe Array," Energies, MDPI, vol. 12(4), pages 1-16, February.
    7. Wang, Zhe & Li, Yanzhong, 2016. "Layer pattern thermal design and optimization for multistream plate-fin heat exchangers—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 500-514.
    8. Lindhe, Jonas & Larsson, Martin & Willis, Morgan & Tiljander, Pia & Johansson, Dennis, 2024. "Challenges and potentials of using a local heat pump in a 5 GDHC solution: Results from field and laboratory evaluations," Energy, Elsevier, vol. 289(C).
    9. Yuan Xue & Zhihua Ge & Xiaoze Du & Lijun Yang, 2018. "On the Heat Transfer Enhancement of Plate Fin Heat Exchanger," Energies, MDPI, vol. 11(6), pages 1-18, May.
    10. Jafari, Davoud & Wits, Wessel W., 2018. "The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 420-442.
    11. Lee, Su Kyoung & Lee, Jae Won & Lee, Hoseong & Chung, Jin Taek & Kang, Yong Tae, 2019. "Optimal design of generators for H2O/LiBr absorption chiller with multi-heat sources," Energy, Elsevier, vol. 167(C), pages 47-59.
    12. Hadidi, Amin, 2015. "A robust approach for optimal design of plate fin heat exchangers using biogeography based optimization (BBO) algorithm," Applied Energy, Elsevier, vol. 150(C), pages 196-210.
    13. Guo, Xiaofeng & Fan, Yilin & Luo, Lingai, 2014. "Multi-channel heat exchanger-reactor using arborescent distributors: A characterization study of fluid distribution, heat exchange performance and exothermic reaction," Energy, Elsevier, vol. 69(C), pages 728-741.
    14. Abu-Khader, Mazen M., 2012. "Plate heat exchangers: Recent advances," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(4), pages 1883-1891.
    15. Osorio, Julian D. & Hovsapian, Rob & Ordonez, Juan C., 2016. "Effect of multi-tank thermal energy storage, recuperator effectiveness, and solar receiver conductance on the performance of a concentrated solar supercritical CO2-based power plant operating under di," Energy, Elsevier, vol. 115(P1), pages 353-368.
    16. Daróczy, László & Janiga, Gábor & Thévenin, Dominique, 2014. "Systematic analysis of the heat exchanger arrangement problem using multi-objective genetic optimization," Energy, Elsevier, vol. 65(C), pages 364-373.
    17. Ebrahimzadeh, Edris & Wilding, Paul & Frankman, David & Fazlollahi, Farhad & Baxter, Larry L., 2016. "Theoretical and experimental analysis of dynamic heat exchanger: Retrofit configuration," Energy, Elsevier, vol. 96(C), pages 545-560.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:51:y:2013:i:c:p:468-474. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.