IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v31y2006i15p3278-3299.html
   My bibliography  Save this article

Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine System

Author

Listed:
  • Calise, F.
  • Dentice d’Accadia, M.
  • Palombo, A.
  • Vanoli, L.

Abstract

The simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell–Gas Turbine (SOFC–GT) power system are discussed in this paper. In the SOFC reactor model, it is assumed that only hydrogen participates in the electrochemical reaction and that the high temperature of the stack pushes the internal steam reforming reaction to completion; the unreacted gases are assumed to be fully oxidized in the combustor downstream of the SOFC stack. Compressors and GTs are modeled on the basis of their isentropic efficiency. As regards the heat exchangers and the heat recovery steam generator, all characterized by a tube-in-tube counterflow arrangement, the simulation is carried out using the thermal efficiency-NTU approach. Energy and exergy balances are performed not only for the whole plant but also for each component in order to evaluate the distribution of irreversibility and thermodynamic inefficiencies. Simulations are performed for different values of operating pressure, fuel utilization factor, fuel-to-air and steam-to-fuel ratios and current density. Results showed that, for a 1.5MW system, an electrical efficiency close to 60% can be achieved using appropriate values of the most important design variables; in particular, the operating pressure and cell current density. When heat loss recovery is also taken into account, a global efficiency of about 70% is achieved.

Suggested Citation

  • Calise, F. & Dentice d’Accadia, M. & Palombo, A. & Vanoli, L., 2006. "Simulation and exergy analysis of a hybrid Solid Oxide Fuel Cell (SOFC)–Gas Turbine System," Energy, Elsevier, vol. 31(15), pages 3278-3299.
    • Handle: RePEc:eee:energy:v:31:y:2006:i:15:p:3278-3299
    DOI: 10.1016/j.energy.2006.03.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544206000624
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2006.03.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Dunbar, William R. & Lior, Noam & Gaggioli, Richard A., 1991. "Combining fuel cells with fuel-fired power plants for improved exergy efficiency," Energy, Elsevier, vol. 16(10), pages 1259-1274.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bang-Møller, C. & Rokni, M. & Elmegaard, B., 2011. "Exergy analysis and optimization of a biomass gasification, solid oxide fuel cell and micro gas turbine hybrid system," Energy, Elsevier, vol. 36(8), pages 4740-4752.
    2. Taufiq, Bin Nur & Kikuchi, Yasunori & Ishimoto, Takayoshi & Honda, Kuniaki & Koyama, Michihisa, 2015. "Conceptual design of light integrated gasification fuel cell based on thermodynamic process simulation," Applied Energy, Elsevier, vol. 147(C), pages 486-499.
    3. Xenos, Dionysios P. & Hofmann, Philipp & Panopoulos, Kyriakos D. & Kakaras, Emmanuel, 2015. "Detailed transient thermal simulation of a planar SOFC (solid oxide fuel cell) using gPROMS™," Energy, Elsevier, vol. 81(C), pages 84-102.
    4. Calise, F. & Dentice d’ Accadia, M. & Vanoli, L. & von Spakovsky, Michael R., 2007. "Full load synthesis/design optimization of a hybrid SOFC–GT power plant," Energy, Elsevier, vol. 32(4), pages 446-458.
    5. Habib, M. A. & Said, S. A. M. & Al-Zaharna, I., 1999. "Thermodynamic optimization of reheat regenerative thermal-power plants," Applied Energy, Elsevier, vol. 63(1), pages 17-34, May.
    6. Chen, Shiyi & Lior, Noam & Xiang, Wenguo, 2015. "Coal gasification integration with solid oxide fuel cell and chemical looping combustion for high-efficiency power generation with inherent CO2 capture," Applied Energy, Elsevier, vol. 146(C), pages 298-312.
    7. Santhanam, S. & Heddrich, M.P. & Riedel, M. & Friedrich, K.A., 2017. "Theoretical and experimental study of Reversible Solid Oxide Cell (r-SOC) systems for energy storage," Energy, Elsevier, vol. 141(C), pages 202-214.
    8. Silveira, José Luz & Martins Leal, Elisângela & Ragonha, Luiz F, 2001. "Analysis of a molten carbonate fuel cell: cogeneration to produce electricity and cold water," Energy, Elsevier, vol. 26(10), pages 891-904.
    9. Rokni, Masoud, 2013. "Thermodynamic analysis of SOFC (solid oxide fuel cell)–Stirling hybrid plants using alternative fuels," Energy, Elsevier, vol. 61(C), pages 87-97.
    10. Choudhury, Arnab & Chandra, H. & Arora, A., 2013. "Application of solid oxide fuel cell technology for power generation—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 430-442.
    11. Rakopoulos, C.D & Kyritsis, D.C, 2001. "Comparative second-law analysis of internal combustion engine operation for methane, methanol, and dodecane fuels," Energy, Elsevier, vol. 26(7), pages 705-722.
    12. Rokni, Masoud, 2010. "Plant characteristics of an integrated solid oxide fuel cell cycle and a steam cycle," Energy, Elsevier, vol. 35(12), pages 4691-4699.
    13. Orlando Corigliano & Leonardo Pagnotta & Petronilla Fragiacomo, 2022. "On the Technology of Solid Oxide Fuel Cell (SOFC) Energy Systems for Stationary Power Generation: A Review," Sustainability, MDPI, vol. 14(22), pages 1-73, November.
    14. Mazzucco, Andrea & Rokni, Masoud, 2014. "Thermo-economic analysis of a solid oxide fuel cell and steam injected gas turbine plant integrated with woodchips gasification," Energy, Elsevier, vol. 76(C), pages 114-129.
    15. Pierobon, Leonardo & Rokni, Masoud & Larsen, Ulrik & Haglind, Fredrik, 2013. "Thermodynamic analysis of an integrated gasification solid oxide fuel cell plant combined with an organic Rankine cycle," Renewable Energy, Elsevier, vol. 60(C), pages 226-234.
    16. Rakopoulos, C.D. & Giakoumis, E.G., 2004. "Availability analysis of a turbocharged diesel engine operating under transient load conditions," Energy, Elsevier, vol. 29(8), pages 1085-1104.

    More about this item

    Keywords

    SOFC; Modelling; Exergy;
    All these keywords.

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:31:y:2006:i:15:p:3278-3299. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.