IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v299y2024ics0360544224012386.html
   My bibliography  Save this article

Application of the fast 3D simplified simulation method for the large CAP1400 nuclear island evaporator based on the coupled source term method

Author

Listed:
  • Guo, Zhenyang
  • Chen, Yanmu
  • Lu, Yeming
  • Wang, Tongjun
  • Wang, Xiaofang
  • Jiang, Xiaomo

Abstract

As for the evaporator of the large CAP1400 nuclear power plant, it has a large volume with numerous tubes along with the complex flow heat transfer phenomenon. The traditional direct simulation method usually takes a lot of time and computing resources to obtain the flow heat transfer data. To solve the problem, a fast simulation method established on the porous medium source term was herein proposed. In this simplified simulation method, the complex evaporator model is replaced with the porous medium model, where the derived heat and momentum source terms are added into the governing equation to control the heat flows. Five kinds of simplified evaporator models with different numbers of pipes were set to be the research objects, the internal flows inside the evaporator were studied with the traditional direct simulation method and the newly proposed simplified simulation method. Via comparative analysis, it can be found that: 1) The newly proposed simplified simulation method accurately captures the distribution characteristics of pressure, temperature, and entropy production in the evaporator, serving as a viable alternative to traditional direct simulation methods. Specifically, the average simulation errors for inlet-outlet pressure difference and temperature difference are both less than 5 % and 7 %, respectively. 2) The newly proposed simplified simulation method can capture the mutual interference effects between the evaporator and the nuclear main pump. When the evaporator is connected in series with the main nuclear pump, the average head of the main pump increases by 0.34 m, while the efficiency decreases by an average of 0.34 %. The average simulation errors of the simplified simulation method are 0.06 m and 0.13 %, respectively. 3) The application of the simplified simulation method leads to a significant 85 % decrease in the average computational cost for evaporator calculations and a notable 36 % decrease for combined calculations of the evaporator and main pump. The study here is expected to provide technique support for the simulation and evaluation of the large nuclear island.

Suggested Citation

  • Guo, Zhenyang & Chen, Yanmu & Lu, Yeming & Wang, Tongjun & Wang, Xiaofang & Jiang, Xiaomo, 2024. "Application of the fast 3D simplified simulation method for the large CAP1400 nuclear island evaporator based on the coupled source term method," Energy, Elsevier, vol. 299(C).
    • Handle: RePEc:eee:energy:v:299:y:2024:i:c:s0360544224012386
    DOI: 10.1016/j.energy.2024.131465
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224012386
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.131465?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Granda, Mariusz & Trojan, Marcin & Taler, Dawid, 2020. "CFD analysis of steam superheater operation in steady and transient state," Energy, Elsevier, vol. 199(C).
    2. Ocłoń, Paweł & Łopata, Stanisław & Stelmach, Tomasz & Li, Mingjie & Zhang, Jian-Fei & Mzad, Hocine & Tao, Wen-Quan, 2021. "Design optimization of a high-temperature fin-and-tube heat exchanger manifold – A case study," Energy, Elsevier, vol. 215(PB).
    3. Kan, Kan & Zhang, Qingying & Xu, Zhe & Zheng, Yuan & Gao, Qiang & Shen, Lian, 2022. "Energy loss mechanism due to tip leakage flow of axial flow pump as turbine under various operating conditions," Energy, Elsevier, vol. 255(C).
    4. Aliyu, Musa D. & Chen, Hua-Peng, 2018. "Enhanced geothermal system modelling with multiple pore media: Thermo-hydraulic coupled processes," Energy, Elsevier, vol. 165(PA), pages 931-948.
    5. Guo, Xiaofeng & Fan, Yilin & Luo, Lingai, 2014. "Multi-channel heat exchanger-reactor using arborescent distributors: A characterization study of fluid distribution, heat exchange performance and exothermic reaction," Energy, Elsevier, vol. 69(C), pages 728-741.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. José Galindo & Andrés Tiseira & Roberto Navarro & Lukas Benjamin Inhestern & Juan David Echavarría, 2022. "Numerical Analysis of the Effects of Different Rotor Tip Gaps in a Radial Turbine Operating at High Pressure Ratios Reaching Choked Flow," Energies, MDPI, vol. 15(24), pages 1-30, December.
    2. Katarzyna Węglarz & Dawid Taler & Jan Taler & Mateusz Marcinkowski, 2023. "Numerical Modelling of Steam Superheaters in Supercritical Boilers," Energies, MDPI, vol. 16(6), pages 1-19, March.
    3. Mu, Tong & Zhang, Rui & Xu, Hui & Fei, Zhaodan & Feng, Jiangang & Jin, Yan & Zheng, Yuan, 2023. "Improvement of energy performance of the axial-flow pump by groove flow control technology based on the entropy theory," Energy, Elsevier, vol. 274(C).
    4. Wei, Min & Fan, Yilin & Luo, Lingai & Flamant, Gilles, 2015. "Fluid flow distribution optimization for minimizing the peak temperature of a tubular solar receiver," Energy, Elsevier, vol. 91(C), pages 663-677.
    5. Chen, Yun & Ma, Guowei & Wang, Huidong & Li, Tuo & Wang, Yang & Sun, Zizheng, 2020. "Optimizing heat mining strategies in a fractured geothermal reservoir considering fracture deformation effects," Renewable Energy, Elsevier, vol. 148(C), pages 326-337.
    6. Jin, Faye & Luo, Yongyao & Zhao, Qiang & Cao, Jiali & Wang, Zhengwei, 2023. "Energy loss analysis of transition simulation for a prototype reversible pump turbine during load rejection process," Energy, Elsevier, vol. 284(C).
    7. Xin-Yue Duan & Di Huang & Wen-Xian Lei & Shi-Chao Chen & Zhao-Qin Huang & Chuan-Yong Zhu, 2023. "Investigation of Heat Extraction in an Enhanced Geothermal System Embedded with Fracture Networks Using the Thermal–Hydraulic–Mechanical Coupling Model," Energies, MDPI, vol. 16(9), pages 1-19, April.
    8. Zhang, Bowen & Cheng, Li & Jiao, Weixuan & Zhang, Di, 2023. "Experimental and statistical analysis of the flap gate energy loss and pressure fluctuation spatiotemporal characteristics of a mixed-flow pump device," Energy, Elsevier, vol. 272(C).
    9. Ma, Yuanyuan & Li, Shibin & Zhang, Ligang & Liu, Songze & Liu, Zhaoyi & Li, Hao & Shi, Erxiu & Zhang, Haijun, 2020. "Numerical simulation study on the heat extraction performance of multi-well injection enhanced geothermal system," Renewable Energy, Elsevier, vol. 151(C), pages 782-795.
    10. Marcin Trojan & Piotr Dzierwa & Jan Taler & Mariusz Granda & Karol Kaczmarski & Dawid Taler & Tomasz Sobota, 2023. "Analysis of the Causes of the Emergency Shutdown of Natural Gas-Fired Water Peak Boilers at the Large Municipal Combined Heat and Power Plant," Energies, MDPI, vol. 16(17), pages 1-21, August.
    11. Madejski, Paweł & Taler, Dawid & Taler, Jan, 2022. "Thermal and flow calculations of platen superheater in large scale CFB boiler," Energy, Elsevier, vol. 258(C).
    12. Aliyu, Musa D. & Finkbeiner, Thomas & Chen, Hua-Peng & Archer, Rosalind A., 2023. "A three-dimensional investigation of the thermoelastic effect in an enhanced geothermal system reservoir," Energy, Elsevier, vol. 262(PA).
    13. Junke Chen & Yifan Liu & Qigang Zhu, 2022. "Enterprise Profitability and Financial Evaluation Model Based on Statistical Modeling: Taking Tencent Music as an Example," Mathematics, MDPI, vol. 10(12), pages 1-17, June.
    14. Kan Kan & Qingying Zhang & Yuan Zheng & Hui Xu & Zhe Xu & Jianwei Zhai & Alexis Muhirwa, 2022. "Investigation into Influence of Wall Roughness on the Hydraulic Characteristics of an Axial Flow Pump as Turbine," Sustainability, MDPI, vol. 14(14), pages 1-20, July.
    15. Wang, Chaoyang & Liu, Ming & Zhao, Yongliang & Yan, Junjie, 2021. "Thermodynamic optimization of the superheater during switching the load transient processes," Energy, Elsevier, vol. 218(C).
    16. Gao, Xiang & Li, Tailu, 2022. "Synergetic characteristics of three-dimensional transient heat transfer in geothermal reservoir combined with power conversion for enhanced geothermal system," Renewable Energy, Elsevier, vol. 192(C), pages 216-230.
    17. Aliyu, Musa D. & Archer, Rosalind A., 2021. "A thermo-hydro-mechanical model of a hot dry rock geothermal reservoir," Renewable Energy, Elsevier, vol. 176(C), pages 475-493.
    18. Ko, Yun Mo & Song, Joo Young & Lee, Jae Won & Sohn, Sangho & Song, Chan Ho & Khoshvaght-Aliabadi, Morteza & Kim, Yongchan & Kang, Yong Tae, 2024. "A critical review on Colburn j-factor and f-factor and energy performance analysis for finned tube heat exchangers," Energy, Elsevier, vol. 287(C).
    19. Jafari, Davoud & Wits, Wessel W., 2018. "The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 420-442.
    20. Zima, Wiesław & Grądziel, Sławomir & Cebula, Artur & Rerak, Monika & Kozak-Jagieła, Ewa & Pilarczyk, Marcin, 2023. "Mathematical model of a power boiler operation under rapid thermal load changes," Energy, Elsevier, vol. 263(PC).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:299:y:2024:i:c:s0360544224012386. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.