IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v294y2024ics0360544224005528.html
   My bibliography  Save this article

Multi-objective modeling and evaluation for energy saving and high efficiency production oriented multidirectional turning considering energy, efficiency, economy and quality

Author

Listed:
  • Li, Yanqi
  • Chen, Junming
  • Wang, Yu
  • Li, Shunjiang
  • Duan, Xiangmin
  • Jiang, Zhigang
  • Lai, Kee-hung
  • Cai, Wei

Abstract

To promote energy saving, high efficiency and quality production in the mechanical manufacturing industry, a large number of studies have been conducted on modelling and evaluation. However, most of the approaches have focused on single objective modelling, evaluation and conventional machining method like unidirectional turning (UDT). This paper presents a multi-objective modelling and evaluation method for energy, efficiency, economy and quality using a new process of forward-and-reverse multidirectional turning (MDT). Firstly, the multi-objective influential factors of cutting parameters for energy consumption, cutting time, production cost and surface roughness of MDT are analyzed to establish the corresponding models, respectively. Then taking the energy consumption, cutting time, production cost and surface roughness as the objectives, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) is applied for the multi-objective evaluation through different processes. Finally, the case study shows the practicability of the MDT method and evaluation method for energy optimization and energy conservation.

Suggested Citation

  • Li, Yanqi & Chen, Junming & Wang, Yu & Li, Shunjiang & Duan, Xiangmin & Jiang, Zhigang & Lai, Kee-hung & Cai, Wei, 2024. "Multi-objective modeling and evaluation for energy saving and high efficiency production oriented multidirectional turning considering energy, efficiency, economy and quality," Energy, Elsevier, vol. 294(C).
    • Handle: RePEc:eee:energy:v:294:y:2024:i:c:s0360544224005528
    DOI: 10.1016/j.energy.2024.130780
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224005528
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.130780?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xiao, Qinge & Li, Congbo & Tang, Ying & Li, Lingling & Li, Li, 2019. "A knowledge-driven method of adaptively optimizing process parameters for energy efficient turning," Energy, Elsevier, vol. 166(C), pages 142-156.
    2. Zhang, Yuanhui & Cai, Wei & He, Yan & Peng, Tao & Jia, Shun & Lai, Kee-hung & Li, Li, 2022. "Forward-and-reverse multidirectional turning: A novel material removal approach for improving energy efficiency, processing efficiency and quality," Energy, Elsevier, vol. 260(C).
    3. Malka, Lorenc & Bidaj, Flamur & Kuriqi, Alban & Jaku, Aldona & Roçi, Rexhina & Gebremedhin, Alemayehu, 2023. "Energy system analysis with a focus on future energy demand projections: The case of Norway," Energy, Elsevier, vol. 272(C).
    4. Hosseinzadeh-Bandbafha, Homa & Safarzadeh, Dariush & Ahmadi, Ebrahim & Nabavi-Pelesaraei, Ashkan & Hosseinzadeh-Bandbafha, Ehssan, 2017. "Applying data envelopment analysis to evaluation of energy efficiency and decreasing of greenhouse gas emissions of fattening farms," Energy, Elsevier, vol. 120(C), pages 652-662.
    5. Cai, Wei & Li, Yanqi & Li, Li & Lai, Kee-hung & Jia, Shun & Xie, Jun & Zhang, Yuanhui & Hu, Luoke, 2022. "Energy saving and high efficiency production oriented forward-and-reverse multidirectional turning: Energy modeling and application," Energy, Elsevier, vol. 252(C).
    6. Lee, Hwarang & Kang, Sung Won & Koo, Yoonmo, 2020. "A hybrid energy system model to evaluate the impact of climate policy on the manufacturing sector: Adoption of energy-efficient technologies and rebound effects," Energy, Elsevier, vol. 212(C).
    7. Khan, A.M. & Liang, L. & Mia, M. & Gupta, M.K. & Wei, Z. & Jamil, M. & Ning, H., 2021. "Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    8. Cai, Wei & Liu, Fei & Zhou, XiaoNa & Xie, Jun, 2016. "Fine energy consumption allowance of workpieces in the mechanical manufacturing industry," Energy, Elsevier, vol. 114(C), pages 623-633.
    9. Wang, Endong, 2015. "Benchmarking whole-building energy performance with multi-criteria technique for order preference by similarity to ideal solution using a selective objective-weighting approach," Applied Energy, Elsevier, vol. 146(C), pages 92-103.
    10. Zhang, Jiaqi & Han, Xin & Li, Li & Jia, Shun & Jiang, Zhigang & Duan, Xiangmin & Lai, Kee-hung & Cai, Wei, 2023. "Multi-objective optimisation for energy saving and high efficiency production oriented multidirectional turning based on improved fireworks algorithm considering energy, efficiency and quality," Energy, Elsevier, vol. 284(C).
    11. Hu, Shuo & Yuan, Zheng & Wang, Ailun, 2024. "Improving carbon emission efficiency in Chinese manufacturing: A study considering technological heterogeneity and noise," Energy, Elsevier, vol. 291(C).
    12. Kelle, Peter & Song, Jinglu & Jin, Mingzhou & Schneider, Helmut & Claypool, Christopher, 2019. "Evaluation of operational and environmental sustainability tradeoffs in multimodal freight transportation planning," International Journal of Production Economics, Elsevier, vol. 209(C), pages 411-420.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Jiaqi & Han, Xin & Li, Li & Jia, Shun & Jiang, Zhigang & Duan, Xiangmin & Lai, Kee-hung & Cai, Wei, 2023. "Multi-objective optimisation for energy saving and high efficiency production oriented multidirectional turning based on improved fireworks algorithm considering energy, efficiency and quality," Energy, Elsevier, vol. 284(C).
    2. Wang, Jinling & Tian, Yebing & Hu, Xintao & Han, Jinguo & Liu, Bing, 2023. "Integrated assessment and optimization of dual environment and production drivers in grinding," Energy, Elsevier, vol. 272(C).
    3. Wen, Xuanhao & Cao, Huajun & Hon, Bernard & Chen, Erheng & Li, Hongcheng, 2021. "Energy value mapping: A novel lean method to integrate energy efficiency into production management," Energy, Elsevier, vol. 217(C).
    4. Wen, Xuanhao & Cao, Huajun & Li, Hongcheng & Zheng, Jie & Ge, Weiwei & Chen, Erheng & Gao, Xi & Hon, Bernard, 2022. "A dual energy benchmarking methodology for energy-efficient production planning and operation of discrete manufacturing systems using data mining techniques," Energy, Elsevier, vol. 255(C).
    5. Babagolzadeh, Mahla & Zhang, Yahua & Abbasi, Babak & Shrestha, Anup & Zhang, Anming, 2022. "Promoting Australian regional airports with subsidy schemes: Optimised downstream logistics using vehicle routing problem," Transport Policy, Elsevier, vol. 128(C), pages 38-51.
    6. Amina Irakoze & Han-Sung Choi & Kee-Han Kim, 2024. "Doing More with Less: Applying Low-Frequency Energy Data to Define Thermal Performance of House Units and Energy-Saving Opportunities," Energies, MDPI, vol. 17(16), pages 1-16, August.
    7. Mujammil Asdhiyoga Rahmanta & Rahmat Adiprasetya Al Hasibi & Handrea Bernando Tambunan & Ruly & Agussalim Syamsuddin & Indra Ardhanayudha Aditya & Benny Susanto, 2024. "Towards a Net Zero-Emission Electricity Generation System by Optimizing Renewable Energy Sources and Nuclear Power Plant," Energies, MDPI, vol. 17(8), pages 1-22, April.
    8. Shun Jia & Qingwen Yuan & Wei Cai & Qinghe Yuan & Conghu Liu & Jingxiang Lv & Zhongwei Zhang, 2018. "Establishment of an Improved Material-Drilling Power Model to Support Energy Management of Drilling Processes," Energies, MDPI, vol. 11(8), pages 1-16, August.
    9. Besagni, Giorgio & Premoli Vilà, Lidia & Borgarello, Marco & Trabucchi, Andrea & Merlo, Marco & Rodeschini, Jacopo & Finazzi, Francesco, 2021. "Electrification pathways of the Italian residential sector under socio-demographic constrains: Looking towards 2040," Energy, Elsevier, vol. 217(C).
    10. Nabavi-Pelesaraei, Ashkan & Azadi, Hossein & Van Passel, Steven & Saber, Zahra & Hosseini-Fashami, Fatemeh & Mostashari-Rad, Fatemeh & Ghasemi-Mobtaker, Hassan, 2021. "Prospects of solar systems in production chain of sunflower oil using cold press method with concentrating energy and life cycle assessment," Energy, Elsevier, vol. 223(C).
    11. Jin, Rui & Li, Lei & Liang, Xiaoling & Zou, Xiang & Yang, Zeyuan & Ge, Shuzhi Sam & Huang, Haihong, 2024. "Energy-efficient design of the powertrain for mechanical-electro-hydraulic equipment via configuring multidimensional controllable variables," Renewable and Sustainable Energy Reviews, Elsevier, vol. 201(C).
    12. Peter DŽUPKA & Marek HORVATH, 2021. "Urban Smart-Mobility Projects Evaluation: A Literature Review," Theoretical and Empirical Researches in Urban Management, Research Centre in Public Administration and Public Services, Bucharest, Romania, vol. 16(4), pages 55-76, November.
    13. Hu, Luoke & Peng, Chen & Evans, Steve & Peng, Tao & Liu, Ying & Tang, Renzhong & Tiwari, Ashutosh, 2017. "Minimising the machining energy consumption of a machine tool by sequencing the features of a part," Energy, Elsevier, vol. 121(C), pages 292-305.
    14. Yossi Hadad & Baruch Keren & Dima Alberg, 2023. "An Expert System for Ranking and Matching Electric Vehicles to Customer Specifications and Requirements," Energies, MDPI, vol. 16(11), pages 1-18, May.
    15. Shaik, Saleem, 2024. "Contribution of climate change to sector-source energy demand," Energy, Elsevier, vol. 294(C).
    16. Dariusz Milewski, 2020. "Total Costs of Centralized and Decentralized Inventory Strategies—Including External Costs," Sustainability, MDPI, vol. 12(22), pages 1-16, November.
    17. Zheng, Xuyue & Wu, Guoce & Qiu, Yuwei & Zhan, Xiangyan & Shah, Nilay & Li, Ning & Zhao, Yingru, 2018. "A MINLP multi-objective optimization model for operational planning of a case study CCHP system in urban China," Applied Energy, Elsevier, vol. 210(C), pages 1126-1140.
    18. Xiao, Qinge & Li, Congbo & Tang, Ying & Pan, Jian & Yu, Jun & Chen, Xingzheng, 2019. "Multi-component energy modeling and optimization for sustainable dry gear hobbing," Energy, Elsevier, vol. 187(C).
    19. Jabeen, Gul & Ahmad, Munir & Zhang, Qingyu, 2021. "Perceived critical factors affecting consumers’ intention to purchase renewable generation technologies: Rural-urban heterogeneity," Energy, Elsevier, vol. 218(C).
    20. Mao, Ning & Song, Mengjie & Deng, Shiming, 2016. "Application of TOPSIS method in evaluating the effects of supply vane angle of a task/ambient air conditioning system on energy utilization and thermal comfort," Applied Energy, Elsevier, vol. 180(C), pages 536-545.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:294:y:2024:i:c:s0360544224005528. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.