IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223021357.html
   My bibliography  Save this article

4E analysis of a novel proton exchange membrane fuel cell/engine based cogeneration system with methanol fuel for ship application

Author

Listed:
  • Li, Chengjie
  • Wang, Zixuan
  • Liu, He
  • Guo, Fafu
  • Xiu, Xinyan
  • Qin, Jiang
  • Wei, Liqiu

Abstract

Cleaner fuels and more efficient systems are important for achieving green, low-carbon ships. In this paper, a novel proton exchange membrane fuel cell/engine based cogeneration system with methanol fuel (MPEC system) for ship application is proposed. By the online catalytic reforming process of methanol, the obtained hydrogen through reforming can provide sufficient high heating value fuel to the MPEC system. The energy efficiency, exergy efficiency, economy and environment (4 E) analysis method is adopted for the comprehensive performance analysis of the MPEC system. The results show that the proposed MPEC system can achieve cogeneration efficiency and power generation efficiency as high as 81.84% and 50.46%, respectively, which performs that the generation efficiency is improved by 19.55% compared to the single engine, and the biggest exergy loss process occurs at the engine. The total life cycle carbon emission and levelized cost of energy of the MPEC system are 344.938 g/kWh and 0.1411 $/kWh, separately. Moreover, the effects of various parameters on the MPEC system performance are analyzed, mainly including steam carbon ratio, current density, etc. Overall, a low-carbon power system with high efficiency and good load performance is achieved by combining high-efficiency fuel cell with a powerful engine.

Suggested Citation

  • Li, Chengjie & Wang, Zixuan & Liu, He & Guo, Fafu & Xiu, Xinyan & Qin, Jiang & Wei, Liqiu, 2023. "4E analysis of a novel proton exchange membrane fuel cell/engine based cogeneration system with methanol fuel for ship application," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223021357
    DOI: 10.1016/j.energy.2023.128741
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223021357
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128741?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Konstantinos Kappis & Joan Papavasiliou & George Avgouropoulos, 2021. "Methanol Reforming Processes for Fuel Cell Applications," Energies, MDPI, vol. 14(24), pages 1-30, December.
    2. You, Huailiang & Han, Jitian & Liu, Yang & Chen, Changnian & Ge, Yi, 2020. "4E analysis and multi-objective optimization of a micro poly-generation system based on SOFC/MGT/MED and organic steam ejector refrigerator," Energy, Elsevier, vol. 206(C).
    3. Poran, Arnon & Tartakovsky, Leonid, 2015. "Energy efficiency of a direct-injection internal combustion engine with high-pressure methanol steam reforming," Energy, Elsevier, vol. 88(C), pages 506-514.
    4. Baccioli, Andrea & Liponi, Angelica & Milewski, Jarosław & Szczęśniak, Arkadiusz & Desideri, Umberto, 2021. "Hybridization of an internal combustion engine with a molten carbonate fuel cell for marine applications," Applied Energy, Elsevier, vol. 298(C).
    5. Sharaf, Omar Z. & Orhan, Mehmet F., 2014. "An overview of fuel cell technology: Fundamentals and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 810-853.
    6. Mosaffa, A.H. & Farshi, L. Garousi, 2018. "Thermodynamic and economic assessments of a novel CCHP cycle utilizing low-temperature heat sources for domestic applications," Renewable Energy, Elsevier, vol. 120(C), pages 134-150.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Chengjie & Wang, Zixuan & Liu, He & Guo, Fafu & Li, Chenghao & Xiu, Xinyan & Wang, Cong & Qin, Jiang & Wei, Liqiu, 2024. "Integrated analysis and performance optimization of fuel cell engine cogeneration system with methanol for marine application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    2. Ouyang, Tiancheng & Tan, Xianlin & Tuo, Xiaoyu & Qin, Peijia & Mo, Chunlan, 2024. "Performance analysis and multi-objective optimization of a novel CCHP system integrated energy storage in large seagoing vessel," Renewable Energy, Elsevier, vol. 224(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Chengjie & Wang, Zixuan & Liu, He & Guo, Fafu & Li, Chenghao & Xiu, Xinyan & Wang, Cong & Qin, Jiang & Wei, Liqiu, 2024. "Integrated analysis and performance optimization of fuel cell engine cogeneration system with methanol for marine application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    2. Ai, Tianchao & Chen, Hongwei & Zhong, Fanghao & Jia, Jiandong & Song, Yangfan, 2023. "Multi-objective optimization of a novel CCHP system with organic flash cycle based on different operating strategies," Energy, Elsevier, vol. 276(C).
    3. Ouyang, Tiancheng & Zhao, Zhongkai & Zhang, Mingliang & Xie, Shutao & Wang, Zhiping, 2022. "A micro off-grid power solution for solid oxide fuel cell waste heat reusing enabled peak load shifting by integrating compressed-air energy storage," Applied Energy, Elsevier, vol. 323(C).
    4. Das, Himadry Shekhar & Tan, Chee Wei & Yatim, A.H.M., 2017. "Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 268-291.
    5. Jae Yun Jeong & Inje Kang & Ki Seok Choi & Byeong-Hee Lee, 2018. "Network Analysis on Green Technology in National Research and Development Projects in Korea," Sustainability, MDPI, vol. 10(4), pages 1-12, April.
    6. Cao, Yan & Dhahad, Hayder A. & Alsharif, Sameer & Sharma, Kamal & El.Shafy, Asem Saleh & Farhang, Babak & Mohammed, Adil Hussein, 2022. "Multi-objective optimizations and exergoeconomic analyses of a high-efficient bi-evaporator multigeneration system with freshwater unit," Renewable Energy, Elsevier, vol. 191(C), pages 699-714.
    7. Kadmiel Karsenty & Leonid Tartakovsky & Eran Sher, 2021. "A Diesel Engine with a Catalytic Piston Surface to Propel Small Aircraft at High Altitudes—A Theoretical Study," Energies, MDPI, vol. 14(7), pages 1-10, March.
    8. Lv, Xiuqing & Chen, Huili & Zhou, Wei & Li, Si-Dian & Cheng, Fangqin & Shao, Zongping, 2022. "SrCo0.4Fe0.4Zr0.1Y0.1O3-δ, A new CO2 tolerant cathode for proton-conducting solid oxide fuel cells," Renewable Energy, Elsevier, vol. 185(C), pages 8-16.
    9. Mehrpooya, Mehdi & Ansarinasab, Hojat & Mousavi, Seyed Ali, 2021. "Life cycle assessment and exergoeconomic analysis of the multi-generation system based on fuel cell for methanol, power, and heat production," Renewable Energy, Elsevier, vol. 172(C), pages 1314-1332.
    10. Lin, Jui-Yen & Shih, Yu-Jen & Chen, Po-Yen & Huang, Yao-Hui, 2016. "Precipitation recovery of boron from aqueous solution by chemical oxo-precipitation at room temperature," Applied Energy, Elsevier, vol. 164(C), pages 1052-1058.
    11. Wang, Junye, 2015. "Theory and practice of flow field designs for fuel cell scaling-up: A critical review," Applied Energy, Elsevier, vol. 157(C), pages 640-663.
    12. Xuexia Zhang & Zixuan Yu & Weirong Chen, 2019. "Life Prediction Based on D-S ELM for PEMFC," Energies, MDPI, vol. 12(19), pages 1-15, September.
    13. Bao, Zhiming & Niu, Zhiqiang & Jiao, Kui, 2020. "Gas distribution and droplet removal of metal foam flow field for proton exchange membrane fuel cells," Applied Energy, Elsevier, vol. 280(C).
    14. Jiang, Hongliang & Xu, Liangfei & Li, Jianqiu & Hu, Zunyan & Ouyang, Minggao, 2019. "Energy management and component sizing for a fuel cell/battery/supercapacitor hybrid powertrain based on two-dimensional optimization algorithms," Energy, Elsevier, vol. 177(C), pages 386-396.
    15. Li, Yanju & Li, Dongxu & Ma, Zheshu & Zheng, Meng & Lu, Zhanghao & Song, Hanlin & Guo, Xinjia & Shao, Wei, 2022. "Performance analysis and optimization of a novel vehicular power system based on HT-PEMFC integrated methanol steam reforming and ORC," Energy, Elsevier, vol. 257(C).
    16. Saka, Kenan & Orhan, Mehmet Fatih, 2022. "Analysis of stack operating conditions for a polymer electrolyte membrane fuel cell," Energy, Elsevier, vol. 258(C).
    17. Pashchenko, Dmitry, 2019. "Pressure drop in the thermochemical recuperators filled with the catalysts of various shapes: A combined experimental and numerical investigation," Energy, Elsevier, vol. 166(C), pages 462-470.
    18. Faydi, Younes & Djdiaa, AbdelAli & Laabassi, Hichame & Ait Omar, Aissam & Bouzekri, Hicham, 2024. "Contribution of green hydrogen vector to guarantee electricity feeding in remote areas- Case study," Renewable Energy, Elsevier, vol. 222(C).
    19. Zhu, Li & Chen, Junghui, 2018. "Prognostics of PEM fuel cells based on Gaussian process state space models," Energy, Elsevier, vol. 149(C), pages 63-73.
    20. Mohammadi, Mohammad & Noorollahi, Younes & Mohammadi-ivatloo, Behnam & Yousefi, Hossein, 2017. "Energy hub: From a model to a concept – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1512-1527.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223021357. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.