IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v281y2023ics0360544223016031.html
   My bibliography  Save this article

A parameterized-loading driven inverse design and multi-objective coupling optimization method for turbine blade based on deep learning

Author

Listed:
  • Zhang, Weihao
  • Li, Lele
  • Li, Ya
  • Jiang, Chiju
  • Wang, Yufan

Abstract

Inverse design is an important part of the initial design stage of blade profile, while the traditional inverse design methods are highly dependent on design experience and physical model simulation, resulting in long design cycles. To accelerate the inverse design, this paper proposes an inverse design method based on load distribution by combining the Variational Auto-Encoder model with the Generative Adversarial Network (VAE-GAN) and U-Net (U-Net1 and U-Net2) using a multi-objective genetic algorithm (GA). The inverse design process is divided into three stages. First, the VAE-GAN model is combined with the GA to generate a batch of load distributions that match the target form. Then the U-Net1 network is used to establish the connection between the load distribution and the blade aerodynamic performance as well as the geometric parameters. The optimal load distribution under multi-objective constraints is filtered by designing the fitness function of the GA. Finally, the blade profile corresponding to the optimal load distribution is inversely designed by the U-Net2 network. Numerical simulation results show that the method can rapidly generate the blade profile corresponding to the specified load distribution, and realize the automatic optimization of aerodynamic performance under certain geometric constraints in the inverse design process.

Suggested Citation

  • Zhang, Weihao & Li, Lele & Li, Ya & Jiang, Chiju & Wang, Yufan, 2023. "A parameterized-loading driven inverse design and multi-objective coupling optimization method for turbine blade based on deep learning," Energy, Elsevier, vol. 281(C).
    • Handle: RePEc:eee:energy:v:281:y:2023:i:c:s0360544223016031
    DOI: 10.1016/j.energy.2023.128209
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223016031
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128209?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Khan, Zain Ullah & Ali, Zaib & Uddin, Emad, 2022. "Performance enhancement of vertical axis hydrokinetic turbine using novel blade profile," Renewable Energy, Elsevier, vol. 188(C), pages 801-818.
    2. Kamal, Ahmed M. & Nawar, Mohamed A.A. & Attai, Youssef A. & Mohamed, Mohamed H., 2023. "Archimedes Spiral Wind Turbine performance study using different aerofoiled blade profiles: Experimental and numerical analyses," Energy, Elsevier, vol. 262(PB).
    3. Wang, Qi & Yang, Li & Rao, Yu, 2021. "Establishment of a generalizable model on a small-scale dataset to predict the surface pressure distribution of gas turbine blades," Energy, Elsevier, vol. 214(C).
    4. Witanowski, Łukasz & Klonowicz, Piotr & Lampart, Piotr & Klimaszewski, Piotr & Suchocki, Tomasz & Jędrzejewski, Łukasz & Zaniewski, Dawid & Ziółkowski, Paweł, 2023. "Impact of rotor geometry optimization on the off-design ORC turbine performance," Energy, Elsevier, vol. 265(C).
    5. Al Jubori, Ayad M. & Al-Dadah, Raya & Mahmoud, Saad, 2017. "Performance enhancement of a small-scale organic Rankine cycle radial-inflow turbine through multi-objective optimization algorithm," Energy, Elsevier, vol. 131(C), pages 297-311.
    6. Du, Qiuwan & Li, Yunzhu & Yang, Like & Liu, Tianyuan & Zhang, Di & Xie, Yonghui, 2022. "Performance prediction and design optimization of turbine blade profile with deep learning method," Energy, Elsevier, vol. 254(PA).
    7. Mohamed, M.H. & Dessoky, A. & Alqurashi, Faris, 2019. "Blade shape effect on the behavior of the H-rotor Darrieus wind turbine: Performance investigation and force analysis," Energy, Elsevier, vol. 179(C), pages 1217-1234.
    8. Zhang, Fangfang & Fang, Mingkun & Pan, Jiale & Tao, Ran & Zhu, Di & Liu, Weichao & Xiao, Ruofu, 2023. "Guide vane profile optimization of pump-turbine for grid connection performance improvement," Energy, Elsevier, vol. 274(C).
    9. Wang, Zheng & Zeng, Tiansheng & Chu, Xuening & Xue, Deyi, 2023. "Multi-objective deep reinforcement learning for optimal design of wind turbine blade," Renewable Energy, Elsevier, vol. 203(C), pages 854-869.
    10. Du, Qiuwan & Yang, Like & Li, Liangliang & Liu, Tianyuan & Zhang, Di & Xie, Yonghui, 2022. "Aerodynamic design and optimization of blade end wall profile of turbomachinery based on series convolutional neural network," Energy, Elsevier, vol. 244(PA).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Lele & Zhang, Weihao & Li, Ya & Zhang, Ruifeng & Liu, Zongwang & Wang, Yufan & Mu, Yumo, 2024. "A non-parametric high-resolution prediction method for turbine blade profile loss based on deep learning," Energy, Elsevier, vol. 288(C).
    2. Liu, Changxing & Zou, Zhengping & Xu, Pengcheng & Wang, Yifan, 2024. "Development of helium turbine loss model based on knowledge transfer with neural network and its application on aerodynamic design," Energy, Elsevier, vol. 297(C).
    3. Celik, Yunus & Ingham, Derek & Ma, Lin & Pourkashanian, Mohamed, 2022. "Design and aerodynamic performance analyses of the self-starting H-type VAWT having J-shaped aerofoils considering various design parameters using CFD," Energy, Elsevier, vol. 251(C).
    4. Li, Jinxing & Liu, Tianyuan & Zhu, Guangya & Li, Yunzhu & Xie, Yonghui, 2023. "Uncertainty quantification and aerodynamic robust optimization of turbomachinery based on graph learning methods," Energy, Elsevier, vol. 273(C).
    5. Qin, Yonglin & Li, Deyou & Wang, Hongjie & Liu, Zhansheng & Wei, Xianzhu & Wang, Xiaohang & Yang, Weibin, 2023. "Comprehensive hydraulic performance improvement in a pump-turbine: An experimental investigation," Energy, Elsevier, vol. 284(C).
    6. Ke Song & Huiting Huan & Yuchi Kang, 2022. "Aerodynamic Performance and Wake Characteristics Analysis of Archimedes Spiral Wind Turbine Rotors with Different Blade Angle," Energies, MDPI, vol. 16(1), pages 1-18, December.
    7. Chen, Wei & Qin, Haoxuan & Zhu, Qing & Bai, Jianshu & Xie, Ningning & Wang, Yazhou & Zhang, Tong & Xue, Xiaodai, 2024. "Optimal design and performance assessment of a proposed constant power operation mode for the constant volume discharging process of advanced adiabatic compressed air energy storage," Renewable Energy, Elsevier, vol. 221(C).
    8. Sun, Hongchuang & Qin, Jiang & Hung, Tzu-Chen & Lin, Chih-Hung & Lin, Yi-Fan, 2018. "Performance comparison of organic Rankine cycle with expansion from superheated zone or two-phase zone based on temperature utilization rate of heat source," Energy, Elsevier, vol. 149(C), pages 566-576.
    9. Witanowski, Łukasz & Ziółkowski, Paweł & Klonowicz, Piotr & Lampart, Piotr, 2023. "A hybrid approach to optimization of radial inflow turbine with principal component analysis," Energy, Elsevier, vol. 272(C).
    10. Jiang, Chiju & Zhang, Weihao & Li, Ya & Li, Lele & Wang, Yufan & Huang, Dongming, 2023. "Multi-scale Pix2Pix network for high-fidelity prediction of adiabatic cooling effectiveness in turbine cascade," Energy, Elsevier, vol. 265(C).
    11. Peng Song & Jinju Sun & Shengyuan Wang & Xuesong Wang, 2022. "Multipoint Design Optimization of a Radial-Outflow Turbine for Kalina Cycle System Considering Flexible Operating Conditions and Variable Ammonia-Water Mass Fraction," Energies, MDPI, vol. 15(22), pages 1-19, November.
    12. Shuozhuo Hu & Zhen Yang & Jian Li & Yuanyuan Duan, 2021. "A Review of Multi-Objective Optimization in Organic Rankine Cycle (ORC) System Design," Energies, MDPI, vol. 14(20), pages 1-36, October.
    13. Kang, Can & Wang, Zhiyuan & Kim, Hyoung-Bum & Shao, Chunbing, 2023. "Effects of solidity on startup performance and flow characteristics of a vertical-axis hydrokinetic rotor with three helical blades," Renewable Energy, Elsevier, vol. 218(C).
    14. Shi, Linjun & Lao, Wenjie & Wu, Feng & Lee, Kwang Y. & Li, Yang & Lin, Keman, 2023. "DDPG-based load frequency control for power systems with renewable energy by DFIM pumped storage hydro unit," Renewable Energy, Elsevier, vol. 218(C).
    15. Du, Qiuwan & Li, Yunzhu & Yang, Like & Liu, Tianyuan & Zhang, Di & Xie, Yonghui, 2022. "Performance prediction and design optimization of turbine blade profile with deep learning method," Energy, Elsevier, vol. 254(PA).
    16. Tian, Wenlong & Ni, Xiwen & Li, Bo & Yang, Guangyong & Mao, Zhaoyong, 2023. "Improving the efficiency of Darrieus turbines through a gear-like turbine layout," Energy, Elsevier, vol. 267(C).
    17. Rengma, Thochi Seb & Subbarao, P.M.V., 2022. "Optimization of semicircular blade profile of Savonius hydrokinetic turbine using artificial neural network," Renewable Energy, Elsevier, vol. 200(C), pages 658-673.
    18. Sun, Hongchuang & Qin, Jiang & Hung, Tzu-Chen & Huang, Hongyan & Yan, Peigang & Lin, Chih-Hung, 2019. "Effect of flow losses in heat exchangers on the performance of organic Rankine cycle," Energy, Elsevier, vol. 172(C), pages 391-400.
    19. Du, Qiuwan & Yang, Like & Li, Liangliang & Liu, Tianyuan & Zhang, Di & Xie, Yonghui, 2022. "Aerodynamic design and optimization of blade end wall profile of turbomachinery based on series convolutional neural network," Energy, Elsevier, vol. 244(PA).
    20. Zhang, Ji & Wu, Ding & Huang, Xiaohui & Hu, Xudong & Fang, Xi & Wen, Chuang, 2024. "Comparative study on the organic rankine cycle off-design performance under different zeotropic mixture flow boiling correlations," Renewable Energy, Elsevier, vol. 226(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:281:y:2023:i:c:s0360544223016031. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.