IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v236y2021ics0360544221016595.html
   My bibliography  Save this article

Thermal performance investigation of a novel heating terminal integrated with flat heat pipe and heat transfer enhancement

Author

Listed:
  • Sun, Hongli
  • Duan, Mengfan
  • Wu, Yifan
  • Lin, Borong
  • Yang, Zixu
  • Zhao, Haitian

Abstract

Comfort heating with fast thermal response rate, which is applicable for intermittent heating, requires of small thermal inertia and a large heat transfer coefficient for heating terminals. However, existing heating terminals are generally inconsistent in terms of the response rate and thermal comfort. Therefore, a novel radiant-convective heating terminal integrated with a flat heat pipe and heat transfer enhancement is proposed in this research. The flat heat pipe, which acts as the radiant panel, provides quick thermal response and high radiation uniformity. Additionally, fins are attached to the back of the flat heat pipe to enhance the heat transfer ability via both natural and forced convection. The heating performance, including the response rate, radiation temperature, heating power was studied experimentally, and influential factors, such as heat source temperature, ambient temperature, and forced convection, were also considered. The results suggested that the heating terminal had a response rate of 920–1125 s, which is superior to other conventional radiant terminals, and the surface temperature distribution exhibited high uniformity. Furthermore, the heating power in the natural convection mode was approximately 498–724 W at the heat source temperature of 50 °C. When the forced convection was activated, the heating power and exergy efficiency increased by up to 62% and 25% respectively. Overall, the novel flat heat pipe heating terminal showed great potential for intermittent heating applications.

Suggested Citation

  • Sun, Hongli & Duan, Mengfan & Wu, Yifan & Lin, Borong & Yang, Zixu & Zhao, Haitian, 2021. "Thermal performance investigation of a novel heating terminal integrated with flat heat pipe and heat transfer enhancement," Energy, Elsevier, vol. 236(C).
    • Handle: RePEc:eee:energy:v:236:y:2021:i:c:s0360544221016595
    DOI: 10.1016/j.energy.2021.121411
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221016595
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.121411?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jouhara, H. & Milko, J. & Danielewicz, J. & Sayegh, M.A. & Szulgowska-Zgrzywa, M. & Ramos, J.B. & Lester, S.P., 2016. "The performance of a novel flat heat pipe based thermal and PV/T (photovoltaic and thermal systems) solar collector that can be used as an energy-active building envelope material," Energy, Elsevier, vol. 108(C), pages 148-154.
    2. Shao, Suola & Zhang, Huan & You, Shijun & Zheng, Wandong & Jiang, Lingfei, 2019. "Thermal performance analysis of a new refrigerant-heated radiator coupled with air-source heat pump heating system," Applied Energy, Elsevier, vol. 247(C), pages 78-88.
    3. Jadhav, T.S. & Lele, M.M., 2016. "Analysis of annual energy savings in air conditioning using different heat pipe heat exchanger configurations integrated with and without evaporative cooling," Energy, Elsevier, vol. 109(C), pages 876-885.
    4. Jouhara, H. & Chauhan, A. & Nannou, T. & Almahmoud, S. & Delpech, B. & Wrobel, L.C., 2017. "Heat pipe based systems - Advances and applications," Energy, Elsevier, vol. 128(C), pages 729-754.
    5. Wang, Zeyu & Diao, Yanhua & Zhao, Yaohua & Wang, Tengyue & Liang, Lin & Chi, Yuying, 2018. "Experimental investigation of an integrated collector–storage solar air heater based on the lap joint-type flat micro-heat pipe arrays," Energy, Elsevier, vol. 160(C), pages 924-939.
    6. Zhao, M. & Gu, Z.L. & Kang, W.B. & Liu, X. & Zhang, L.Y. & Jin, L.W. & Zhang, Q.L., 2017. "Experimental investigation and feasibility analysis on a capillary radiant heating system based on solar and air source heat pump dual heat source," Applied Energy, Elsevier, vol. 185(P2), pages 2094-2105.
    7. Cheng, Wenlong & Xie, Biao & Zhang, Rongming & Xu, Zhiming & Xia, Yuting, 2015. "Effect of thermal conductivities of shape stabilized PCM on under-floor heating system," Applied Energy, Elsevier, vol. 144(C), pages 10-18.
    8. Jouhara, Hussam & Meskimmon, Richard, 2014. "Heat pipe based thermal management systems for energy-efficient data centres," Energy, Elsevier, vol. 77(C), pages 265-270.
    9. Wu, Jianghong & Xu, Zhe & Jiang, Feng, 2019. "Analysis and development trends of Chinese energy efficiency standards for room air conditioners," Energy Policy, Elsevier, vol. 125(C), pages 368-383.
    10. Jouhara, Hussam & Almahmoud, Sulaiman & Chauhan, Amisha & Delpech, Bertrand & Bianchi, Giuseppe & Tassou, Savvas A. & Llera, Rocio & Lago, Francisco & Arribas, Juan José, 2017. "Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry," Energy, Elsevier, vol. 141(C), pages 1928-1939.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Duan, Mengfan & Sun, Hongli & Wu, Shuangdui & Wu, Yifan & Lin, Borong, 2023. "A simplified model for the evaluation and comparison of the dynamic performance of different heating terminal types," Energy, Elsevier, vol. 263(PD).
    2. Boris Vladimirovich Borisov & Alexander Vitalievich Vyatkin & Geniy Vladimirovich Kuznetsov & Vyacheslav Ivanovich Maksimov & Tatiana Aleksandrovna Nagornova, 2022. "Analysis of the Influence of the Gas Infrared Heater and Equipment Element Relative Positions on Industrial Premises Thermal Conditions," Energies, MDPI, vol. 15(22), pages 1-19, November.
    3. Chen, Tingsen & Liu, Shuli & Zhang, Shaoliang & Shen, Yongliang & Ji, Wenjie & Wang, Zhihao & Li, Wuyan, 2024. "Experimental study on solar wall by considering parametric sensitivity analysis to enhance heat transfer and energy grade using compound parabolic concentrator and pulsating heat pipe," Renewable Energy, Elsevier, vol. 229(C).
    4. Sun, Hongli & Duan, Mengfan & Yang, Zixu & Ding, Pei & Wu, Yifan & Lin, Borong, 2023. "Evaluation of the intermittent performance of heating terminals based on exergy analysis: Discriminate the impacts of heat and electricity input," Applied Energy, Elsevier, vol. 346(C).
    5. Dong Zhang & Haixia Li & Jianghao Wu & Qingliang Li & Baorui Xu & Zhoujian An, 2022. "Experimental Study on the Effect of Inclination Angle on the Heat Transfer Characteristics of Pulsating Heat Pipe under Variable Heat Flux," Energies, MDPI, vol. 15(21), pages 1-17, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Malinauskaite, Jurgita & Jouhara, Hussam & Egilegor, Bakartxo & Al-Mansour, Fouad & Ahmad, Lujean & Pusnik, Matevz, 2020. "Energy efficiency in the industrial sector in the EU, Slovenia, and Spain," Energy, Elsevier, vol. 208(C).
    2. Zhou, Ruiwen & Ling, Xiang & Peng, Hao & Yang, Lin, 2018. "Thermal characteristics of the combined flat plate heat receiver in solar power tower plant," Energy, Elsevier, vol. 165(PA), pages 275-289.
    3. Malinauskaite, J. & Jouhara, H. & Ahmad, L. & Milani, M. & Montorsi, L. & Venturelli, M., 2019. "Energy efficiency in industry: EU and national policies in Italy and the UK," Energy, Elsevier, vol. 172(C), pages 255-269.
    4. Jouhara, Hussam & Almahmoud, Sulaiman & Brough, Daniel & Guichet, Valentin & Delpech, Bertrand & Chauhan, Amisha & Ahmad, Lujean & Serey, Nicolas, 2021. "Experimental and theoretical investigation of the performance of an air to water multi-pass heat pipe-based heat exchanger," Energy, Elsevier, vol. 219(C).
    5. Jouhara, H. & Nannou, T.K. & Anguilano, L. & Ghazal, H. & Spencer, N., 2017. "Heat pipe based municipal waste treatment unit for home energy recovery," Energy, Elsevier, vol. 139(C), pages 1210-1230.
    6. Shafieian, Abdellah & Khiadani, Mehdi & Nosrati, Ataollah, 2018. "A review of latest developments, progress, and applications of heat pipe solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 95(C), pages 273-304.
    7. Jouhara, Hussam & Almahmoud, Sulaiman & Chauhan, Amisha & Delpech, Bertrand & Bianchi, Giuseppe & Tassou, Savvas A. & Llera, Rocio & Lago, Francisco & Arribas, Juan José, 2017. "Experimental and theoretical investigation of a flat heat pipe heat exchanger for waste heat recovery in the steel industry," Energy, Elsevier, vol. 141(C), pages 1928-1939.
    8. Delpech, Bertrand & Axcell, Brian & Jouhara, Hussam, 2019. "Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln," Energy, Elsevier, vol. 170(C), pages 636-651.
    9. Delpech, Bertrand & Milani, Massimo & Montorsi, Luca & Boscardin, Davide & Chauhan, Amisha & Almahmoud, Sulaiman & Axcell, Brian & Jouhara, Hussam, 2018. "Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry," Energy, Elsevier, vol. 158(C), pages 656-665.
    10. Samiya Aamir Al-Mabsali & Hassam Nasarullah Chaudhry & Mehreen Saleem Gul, 2019. "Numerical Investigation on Heat Pipe Spanwise Spacing to Determine Optimum Configuration for Passive Cooling of Photovoltaic Panels," Energies, MDPI, vol. 12(24), pages 1-14, December.
    11. Liu, Changtian & Du, Mingsheng & Zhou, Ruiwen & Wang, Hang & Ling, Xiang & Hu, Yige, 2022. "Experimental investigation on thermal characteristics of a novel mesh flat-plate heat receiver in a solar power tower system," Energy, Elsevier, vol. 242(C).
    12. Khordehgah, N. & Żabnieńska-Góra, A. & Jouhara, H., 2021. "Analytical modelling of a photovoltaics-thermal technology combined with thermal and electrical storage systems," Renewable Energy, Elsevier, vol. 165(P1), pages 350-358.
    13. Almahmoud, Sulaiman & Jouhara, Hussam, 2019. "Experimental and theoretical investigation on a radiative flat heat pipe heat exchanger," Energy, Elsevier, vol. 174(C), pages 972-984.
    14. Yao, Jian & Dou, Pengbo & Zheng, Sihang & Zhao, Yao & Dai, Yanjun & Zhu, Junjie & Novakovic, Vojislav, 2022. "Co-generation ability investigation of the novel structured PVT heat pump system and its effect on the “Carbon neutral” strategy of Shanghai," Energy, Elsevier, vol. 239(PA).
    15. Eui-Hyeok Song & Kye-Bock Lee & Seok-Ho Rhi & Kibum Kim, 2020. "Thermal and Flow Characteristics in a Concentric Annular Heat Pipe Heat Sink," Energies, MDPI, vol. 13(20), pages 1-15, October.
    16. Kravanja, Gregor & Zajc, Gašper & Knez, Željko & Škerget, Mojca & Marčič, Simon & Knez, Maša H., 2018. "Heat transfer performance of CO2, ethane and their azeotropic mixture under supercritical conditions," Energy, Elsevier, vol. 152(C), pages 190-201.
    17. Pei, Wansheng & Zhang, Mingyi & Li, Shuangyang & Lai, Yuanming & Dong, Yuanhong & Jin, Long, 2019. "Laboratory investigation of the efficiency optimization of an inclined two-phase closed thermosyphon in ambient cool energy utilization," Renewable Energy, Elsevier, vol. 133(C), pages 1178-1187.
    18. Zhang, Feng & Cai, Jingyong & Ji, Jie & Han, Kedong & Ke, Wei, 2020. "Experimental investigation on the heating and cooling performance of a solar air composite heat source heat pump," Renewable Energy, Elsevier, vol. 161(C), pages 221-229.
    19. Shao, Suola & Zhang, Huan & You, Shijun & Zheng, Wandong & Jiang, Lingfei, 2019. "Thermal performance analysis of a new refrigerant-heated radiator coupled with air-source heat pump heating system," Applied Energy, Elsevier, vol. 247(C), pages 78-88.
    20. Liangyu Wu & Yingying Chen & Suchen Wu & Mengchen Zhang & Weibo Yang & Fangping Tang, 2018. "Visualization Study of Startup Modes and Operating States of a Flat Two-Phase Micro Thermosyphon," Energies, MDPI, vol. 11(9), pages 1-15, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:236:y:2021:i:c:s0360544221016595. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.