IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v235y2021ics0360544221016303.html
   My bibliography  Save this article

Study on the influence of tank structure and fin configuration on heat transfer performance of phase change thermal storage system

Author

Listed:
  • Mao, Qianjun
  • Li, Ying
  • Li, Guiqiang
  • Badiei, Ali

Abstract

Owing to the intermittent and fluctuating nature of solar energy, thermal energy storage (TES) plays a vital role in solar energy utilization. The structural and geometric limits of the traditional heat storage systems, as well as the low thermal conductivity of phase change materials (PCMs), decrease the heat storage and exothermic efficiency of TES severely. To alleviate these shortcomings and improve the TES heat storage and release efficiency, the geometrical structure of TES and fin structure of the heat storage system need to be optimized. This study established a 2D model of the phase change TES unit with a single tank and auxiliary electric heating based on the experimental findings. The heat transfer performance of the truncated cone model with different taper configurations was also analyzed numerically. The influence of long and short fins on PCM heat transfer was analyzed under the premise of a certain fin volume. The influence of fins with different inclinations on the heat transfer process was also analyzed. The results show that the truncated cone with a taper of 0.37 performs best in the charging and discharging process. Compared with long fins, most short fins showed to have a more significant effect on accelerating the charging process. The enhancement effect of the different fin on the heat transfer process was divided into two categories, and the analysis shows that the fins with an inclination angle of −15° have the most significant enhancement effect. These findings of the study will guide the optimization design of the heat transfer structure of TES with a single tank configuration.

Suggested Citation

  • Mao, Qianjun & Li, Ying & Li, Guiqiang & Badiei, Ali, 2021. "Study on the influence of tank structure and fin configuration on heat transfer performance of phase change thermal storage system," Energy, Elsevier, vol. 235(C).
    • Handle: RePEc:eee:energy:v:235:y:2021:i:c:s0360544221016303
    DOI: 10.1016/j.energy.2021.121382
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221016303
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.121382?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yang, Xiaoping & Yang, Xiaoxi & Ding, Jing & Shao, Youyuan & Fan, Hongbo, 2012. "Numerical simulation study on the heat transfer characteristics of the tube receiver of the solar thermal power tower," Applied Energy, Elsevier, vol. 90(1), pages 142-147.
    2. Mao, Qianjun, 2016. "Recent developments in geometrical configurations of thermal energy storage for concentrating solar power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 320-327.
    3. Mao, Qianjun & Zhang, Yamei, 2020. "Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system," Renewable Energy, Elsevier, vol. 152(C), pages 110-119.
    4. Tay, N.H.S. & Belusko, M. & Liu, M. & Bruno, F., 2015. "Investigation of the effect of dynamic melting in a tube-in-tank PCM system using a CFD model," Applied Energy, Elsevier, vol. 137(C), pages 738-747.
    5. Tao, Y.B. & He, Y.L., 2015. "Effects of natural convection on latent heat storage performance of salt in a horizontal concentric tube," Applied Energy, Elsevier, vol. 143(C), pages 38-46.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mao, Qianjun & Zhu, Yuanyuan & Li, Tao, 2023. "Study on heat storage performance of a novel bifurcated finned shell-tube heat storage tank," Energy, Elsevier, vol. 263(PA).
    2. Li Peng & Hongjun Wu & Qianjun Mao, 2022. "Visualizing Experimental Study of the Effect of Inclination Angle on the Melting Performance for an Energy Storage Tank," Energies, MDPI, vol. 15(19), pages 1-11, October.
    3. Rusin, Krzysztof & Ochmann, Jakub & Bartela, Łukasz & Rulik, Sebastian & Stanek, Bartosz & Jurczyk, Michał & Waniczek, Sebastian, 2022. "Influence of geometrical dimensions and particle diameter on exergy performance of packed-bed thermal energy storage," Energy, Elsevier, vol. 260(C).
    4. Chen, Xudong & Li, Chunzhe & Yang, Zhenning & Dong, Yan & Wang, Fuqiang & Cheng, Ziming & Yang, Chun, 2024. "Golf-ball-inspired phase change material capsule: Experimental and numerical simulation analysis of flow characteristics and thermal performance," Energy, Elsevier, vol. 293(C).
    5. He, Wei & Xu, Qing & Liu, Shengchun & Wang, Tieying & Wang, Fang & Wu, Xiaohui & Wang, Yulin & Li, Hailong, 2024. "Analysis on data center power supply system based on multiple renewable power configurations and multi-objective optimization," Renewable Energy, Elsevier, vol. 222(C).
    6. Qianjun Mao & Xinlei Hu & Yuanyuan Zhu, 2022. "Numerical Investigation of Heat Transfer Performance and Structural Optimization of Fan-Shaped Finned Tube Heat Exchanger," Energies, MDPI, vol. 15(15), pages 1-16, August.
    7. Mao, Qianjun & Hu, Xinlei & Li, Tao, 2022. "Study on heat storage performance of a novel vertical shell and multi-finned tube tank," Renewable Energy, Elsevier, vol. 193(C), pages 76-88.
    8. Dawid Taler & Jan Taler & Tomasz Sobota & Jarosław Tokarczyk, 2022. "Cooling Modelling of an Electrically Heated Ceramic Heat Accumulator," Energies, MDPI, vol. 15(16), pages 1-26, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Du, Kun & Calautit, John & Eames, Philip & Wu, Yupeng, 2021. "A state-of-the-art review of the application of phase change materials (PCM) in Mobilized-Thermal Energy Storage (M-TES) for recovering low-temperature industrial waste heat (IWH) for distributed heat," Renewable Energy, Elsevier, vol. 168(C), pages 1040-1057.
    2. He, Wei & Xu, Qing & Liu, Shengchun & Wang, Tieying & Wang, Fang & Wu, Xiaohui & Wang, Yulin & Li, Hailong, 2024. "Analysis on data center power supply system based on multiple renewable power configurations and multi-objective optimization," Renewable Energy, Elsevier, vol. 222(C).
    3. Mao, Qianjun & Zhu, Yuanyuan & Li, Tao, 2023. "Study on heat storage performance of a novel bifurcated finned shell-tube heat storage tank," Energy, Elsevier, vol. 263(PA).
    4. Xu, Yang & Li, Ming-Jia & Zheng, Zhang-Jing & Xue, Xiao-Dai, 2018. "Melting performance enhancement of phase change material by a limited amount of metal foam: Configurational optimization and economic assessment," Applied Energy, Elsevier, vol. 212(C), pages 868-880.
    5. Sadi, M. & Arabkoohsar, A., 2019. "Exergoeconomic analysis of a combined solar-waste driven power plant," Renewable Energy, Elsevier, vol. 141(C), pages 883-893.
    6. Mao, Qianjun & Zhang, Yamei, 2020. "Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system," Renewable Energy, Elsevier, vol. 152(C), pages 110-119.
    7. Ye, Yang & Lu, Jianfeng & Ding, Jing & Wang, Weilong & Yan, Jinyue, 2020. "Numerical simulation on the storage performance of a phase change materials based metal hydride hydrogen storage tank," Applied Energy, Elsevier, vol. 278(C).
    8. Jayathunga, D.S. & Karunathilake, H.P. & Narayana, M. & Witharana, S., 2024. "Phase change material (PCM) candidates for latent heat thermal energy storage (LHTES) in concentrated solar power (CSP) based thermal applications - A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PB).
    9. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    10. Sardari, Pouyan Talebizadeh & Mohammed, Hayder I. & Giddings, Donald & walker, Gavin S. & Gillott, Mark & Grant, David, 2019. "Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source," Energy, Elsevier, vol. 189(C).
    11. Yu, Yan S.W. & Sun, Daming & Zhang, Jie & Xu, Ya & Qi, Yun, 2017. "Study on a Pi-type mean flow acoustic engine capable of wind energy harvesting using a CFD model," Applied Energy, Elsevier, vol. 189(C), pages 602-612.
    12. Martin Tenpierik & Yvonne Wattez & Michela Turrin & Tudor Cosmatu & Stavroula Tsafou, 2019. "Temperature Control in (Translucent) Phase Change Materials Applied in Facades: A Numerical Study," Energies, MDPI, vol. 12(17), pages 1-16, August.
    13. Nie, Binjian & Zou, Boyang & She, Xiaohui & Zhang, Tongtong & Li, Yongliang & Ding, Yulong, 2020. "Development of a heat transfer coefficient based design method of a thermal energy storage device for transport air-conditioning applications," Energy, Elsevier, vol. 196(C).
    14. Xie, Baoshan & Baudin, Nicolas & Soto, Jérôme & Fan, Yilin & Luo, Lingai, 2022. "Wall impact on efficiency of packed-bed thermocline thermal energy storage system," Energy, Elsevier, vol. 247(C).
    15. Wenwen Ye & Dourna Jamshideasli & Jay M. Khodadadi, 2023. "Improved Performance of Latent Heat Energy Storage Systems in Response to Utilization of High Thermal Conductivity Fins," Energies, MDPI, vol. 16(3), pages 1-83, January.
    16. Jeroen Mol & Mina Shahi & Amirhoushang Mahmoudi, 2020. "Numerical Modeling of Thermal Storage Performance of Encapsulated PCM Particles in an Unstructured Packed Bed," Energies, MDPI, vol. 13(23), pages 1-16, December.
    17. Jacob, Rhys & Bruno, Frank, 2015. "Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 79-87.
    18. Messaoud Hazmoune & Benaoumeur Aour & Xavier Chesneau & Mohammed Debbache & Dana-Alexandra Ciupageanu & Gheorghe Lazaroiu & Mohamed Mondji Hadjiat & Abderrahmane Hamidat, 2020. "Numerical Analysis of a Solar Tower Receiver Novel Design," Sustainability, MDPI, vol. 12(17), pages 1-12, August.
    19. Saedpanah, Ehsan & Lahonian, Mansour & Malek Abad, Mahdi Zare, 2023. "Optimization of multi-source renewable energy air conditioning systems using a combination of transient simulation, response surface method, and 3E lifespan analysis," Energy, Elsevier, vol. 272(C).
    20. Anagnostopoulos, Argyrios & Xenitopoulos, Theofilos & Ding, Yulong & Seferlis, Panos, 2024. "An integrated machine learning and metaheuristic approach for advanced packed bed latent heat storage system design and optimization," Energy, Elsevier, vol. 297(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:235:y:2021:i:c:s0360544221016303. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.