IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v172y2019icp517-530.html
   My bibliography  Save this article

Numerical investigations on serpentine channel for supercritical CO2 recuperator

Author

Listed:
  • Cui, Xinying
  • Guo, Jiangfeng
  • Huai, Xiulan
  • Zhang, Haiyan
  • Cheng, Keyong
  • Zhou, Jingzhi

Abstract

The Printed Circuit Heat Exchanger (PCHE) in supercritical carbon dioxide (S-CO2) Brayton cycle has a significant effect on the efficiency, compactness and stability of system. To improve the performance of PCHE with serpentine channel, the present work numerically investigated the mechanism of convective heat transfer of S-CO2 in serpentine channel under turbulent condition with inlet Re = 9500–30000, and explored the effects of geometrical parameters on the thermohydraulic performance. The secondary flow motion and the effect of Prandtl number were investigated, and the curvature diameter (D), the camber (C) and the cross-sectional shape were compared and discussed. It was found that high Prandtl number enhances the heat transfer performance significantly near the pseudocritical point, and the secondary flow improves the field synergy and enhances the convective heat transfer in serpentine channel. With smaller curvature diameter or larger camber, the serpentine channel has better overall performance and smaller entransy dissipation-based thermal resistance at relatively low Reynold number, while the thermohydraulic performance becomes worse in the case of relatively high Reynold number due to the considerable flow resistance. Among the numerous cross-sectional shapes, the circle has the best heat transfer performance and the vertical ellipse has the least flow friction.

Suggested Citation

  • Cui, Xinying & Guo, Jiangfeng & Huai, Xiulan & Zhang, Haiyan & Cheng, Keyong & Zhou, Jingzhi, 2019. "Numerical investigations on serpentine channel for supercritical CO2 recuperator," Energy, Elsevier, vol. 172(C), pages 517-530.
    • Handle: RePEc:eee:energy:v:172:y:2019:i:c:p:517-530
    DOI: 10.1016/j.energy.2019.01.148
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219301641
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.01.148?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Guo, Jiangfeng, 2016. "Design analysis of supercritical carbon dioxide recuperator," Applied Energy, Elsevier, vol. 164(C), pages 21-27.
    2. Huang, Dan & Wu, Zan & Sunden, Bengt & Li, Wei, 2016. "A brief review on convection heat transfer of fluids at supercritical pressures in tubes and the recent progress," Applied Energy, Elsevier, vol. 162(C), pages 494-505.
    3. Ehsan, M. Monjurul & Guan, Zhiqiang & Klimenko, A.Y., 2018. "A comprehensive review on heat transfer and pressure drop characteristics and correlations with supercritical CO2 under heating and cooling applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 92(C), pages 658-675.
    4. Li, Qi & Flamant, Gilles & Yuan, Xigang & Neveu, Pierre & Luo, Lingai, 2011. "Compact heat exchangers: A review and future applications for a new generation of high temperature solar receivers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 4855-4875.
    5. Xu, Jinliang & Sun, Enhui & Li, Mingjia & Liu, Huan & Zhu, Bingguo, 2018. "Key issues and solution strategies for supercritical carbon dioxide coal fired power plant," Energy, Elsevier, vol. 157(C), pages 227-246.
    6. Guo, Jiangfeng & Xu, Mingtian & Cheng, Lin, 2009. "The application of field synergy number in shell-and-tube heat exchanger optimization design," Applied Energy, Elsevier, vol. 86(10), pages 2079-2087, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xu, Yong & Yi, Zhengming, 2023. "Effect of flow direction on heat transfer characteristics of supercritical CO2 in a heating serpentine micro-tube," Energy, Elsevier, vol. 262(PB).
    2. Zhang, Shijie & Xu, Xiaoxiao & Liu, Chao & Dang, Chaobin, 2020. "A review on application and heat transfer enhancement of supercritical CO2 in low-grade heat conversion," Applied Energy, Elsevier, vol. 269(C).
    3. Khoshvaght-Aliabadi, Morteza & Ghodrati, Parvaneh & Kang, Yong Tae, 2023. "Optimal combination of converging and diverging minichannels in PCHE as precooler under diverse operating conditions of supercritical CO2," Energy, Elsevier, vol. 272(C).
    4. Guo, Jiangfeng & Song, Jian & Han, Zengxiao & Pervunin, Konstantin S. & Markides, Christos N., 2022. "Investigation of the thermohydraulic characteristics of vertical supercritical CO2 flows at cooling conditions," Energy, Elsevier, vol. 256(C).
    5. Liu, Guangxu & Huang, Yanping & Wang, Junfeng & Liu, Ruilong, 2020. "A review on the thermal-hydraulic performance and optimization of printed circuit heat exchangers for supercritical CO2 in advanced nuclear power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    6. Li, Zhen & Lu, Daogang & Wang, Zhichao & Cao, Qiong, 2023. "Analysis on flow and heat transfer performance of SCO2 in airfoil channels with different fin angles of attack," Energy, Elsevier, vol. 282(C).
    7. Xinxin Liu & Shuoshuo Li & Liang Liu & Chao He & Zhuang Sun & Faruk Özdemir & Muhammad Aziz & Po-Chih Kuo, 2022. "Research Progress on Convective Heat Transfer Characteristics of Supercritical Fluids in Curved Tube," Energies, MDPI, vol. 15(22), pages 1-23, November.
    8. Hu, Hemin & Guo, Chaohong & Cai, Haofei & Jiang, Yuyan & Liang, Shiqiang & Guo, Yongxian, 2021. "Dynamic characteristics of the recuperator thermal performance in a S–CO2 Brayton cycle," Energy, Elsevier, vol. 214(C).
    9. Liu, Zhiyuan & Wang, Peng & Sun, Xiangyu & Zhao, Ben, 2022. "Analysis on thermodynamic and economic performances of supercritical carbon dioxide Brayton cycle with the dynamic component models and constraint conditions," Energy, Elsevier, vol. 240(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Guo, Jiangfeng & Xiang, Mengru & Zhang, Haiyan & Huai, Xiulan & Cheng, Keyong & Cui, Xinying, 2019. "Thermal-hydraulic characteristics of supercritical pressure CO2 in vertical tubes under cooling and heating conditions," Energy, Elsevier, vol. 170(C), pages 1067-1081.
    2. Yang, D.L. & Tang, G.H. & Fan, Y.H. & Li, X.L. & Wang, S.Q., 2020. "Arrangement and three-dimensional analysis of cooling wall in 1000 MW S–CO2 coal-fired boiler," Energy, Elsevier, vol. 197(C).
    3. Pandey, V. & Kumar, P. & Dutta, P., 2020. "Thermo-hydraulic analysis of compact heat exchanger for a simple recuperated sCO2 Brayton cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    4. Cheng, Liangyuan & Xu, Jinliang & Cao, Wenxuan & Zhou, Kaiping & Liu, Guanglin, 2024. "Supercritical carbon dioxide heat transfer in horizontal tube based on the Froude number analysis," Energy, Elsevier, vol. 294(C).
    5. Jianguo Yan & Shouchun Liu & Pengcheng Guo & Qincheng Bi, 2020. "Experiments on Heat Transfer of Supercritical Pressure Kerosene in Mini Tube under Ultra-High Heat Fluxes," Energies, MDPI, vol. 13(5), pages 1-14, March.
    6. Yang, D.L. & Tang, G.H. & Li, X.L. & Fan, Y.H., 2022. "Capacity-dependent configurations of S–CO2 coal-fired boiler by overall analysis with a unified model," Energy, Elsevier, vol. 245(C).
    7. Yao, Yecheng & Zhu, Qi’an & Li, Zhouhang, 2020. "Performance of helically coiled gas heaters in supercritical CO2 Rankine cycles: A detailed assessment under convective boundary condition," Energy, Elsevier, vol. 195(C).
    8. Jiang, Yuan & Liese, Eric & Zitney, Stephen E. & Bhattacharyya, Debangsu, 2018. "Design and dynamic modeling of printed circuit heat exchangers for supercritical carbon dioxide Brayton power cycles," Applied Energy, Elsevier, vol. 231(C), pages 1019-1032.
    9. Zhang, Shijie & Xu, Xiaoxiao & Liu, Chao & Dang, Chaobin, 2020. "A review on application and heat transfer enhancement of supercritical CO2 in low-grade heat conversion," Applied Energy, Elsevier, vol. 269(C).
    10. Liu, Xiaokai & Guo, Jiangfeng & Han, Zengxiao & Cheng, Keyong & Huai, Xiulan, 2022. "Studies on thermal-hydraulic characteristics of supercritical CO2 flows with non-uniform heat flux in a tubular solar receiver," Renewable Energy, Elsevier, vol. 201(P1), pages 291-304.
    11. Ehsan, M. Monjurul & Duniam, Sam & Li, Jishun & Guan, Zhiqiang & Gurgenci, Hal & Klimenko, Alexander, 2019. "Effect of cooling system design on the performance of the recompression CO2 cycle for concentrated solar power application," Energy, Elsevier, vol. 180(C), pages 480-494.
    12. Reyes-Belmonte, M.A. & Sebastián, A. & Romero, M. & González-Aguilar, J., 2016. "Optimization of a recompression supercritical carbon dioxide cycle for an innovative central receiver solar power plant," Energy, Elsevier, vol. 112(C), pages 17-27.
    13. Fan, Y.H. & Tang, G.H. & Li, X.L. & Yang, D.L. & Wang, S.Q., 2019. "Correlation evaluation on circumferentially average heat transfer for supercritical carbon dioxide in non-uniform heating vertical tubes," Energy, Elsevier, vol. 170(C), pages 480-496.
    14. Fan, Y.H. & Yang, D.L. & Tang, G.H. & Sheng, Q. & Li, X.L., 2022. "Design of S–CO2 coal-fired power system based on the multiscale analysis platform," Energy, Elsevier, vol. 240(C).
    15. Li, X.L. & Li, G.X. & Tang, G.H. & Fan, Y.H. & Yang, D.L., 2023. "A generalized thermal deviation factor to evaluate the comprehensive stress of tubes under non-uniform heating," Energy, Elsevier, vol. 263(PA).
    16. Jiang, Yuemao & Wang, Shunsen & Wang, Zhe & Su, Wen, 2024. "Performance enhancement of gas turbine by supercritical CO2 cycle construction: System and component two-level evaluation," Energy, Elsevier, vol. 302(C).
    17. Fu, Qianmei & Ding, Jing & Lao, Jiewei & Wang, Weilong & Lu, Jianfeng, 2019. "Thermal-hydraulic performance of printed circuit heat exchanger with supercritical carbon dioxide airfoil fin passage and molten salt straight passage," Applied Energy, Elsevier, vol. 247(C), pages 594-604.
    18. Laskowski, Rafał & Smyk, Adam & Lewandowski, Janusz & Rusowicz, Artur & Grzebielec, Andrzej, 2016. "Selecting the cooling water mass flow rate for a power plant under variable load with entropy generation rate minimization," Energy, Elsevier, vol. 107(C), pages 725-733.
    19. Wang, Zhe & Li, Yanzhong, 2016. "A combined method for surface selection and layer pattern optimization of a multistream plate-fin heat exchanger," Applied Energy, Elsevier, vol. 165(C), pages 815-827.
    20. Luo, Kun & Zhao, Chunguang & Wen, Xu & Gao, Zhengwei & Bai, Yun & Xing, Jiangkuan & Fan, Jianren, 2019. "A priori study of an extended flamelet/progress variable model for NO prediction in pulverized coal flames," Energy, Elsevier, vol. 175(C), pages 768-780.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:172:y:2019:i:c:p:517-530. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.