IDEAS home Printed from https://ideas.repec.org/a/eee/deveng/v2y2017icp12-19.html
   My bibliography  Save this article

Balancing technical and user objectives in the redesign of a peruvian cookstove

Author

Listed:
  • Thacker, Kendall S.
  • Barger, K. McCall
  • Mattson, Christopher A.

Abstract

Over the past decade a large amount of research has been dedicated in academic literature to improving the technical capabilities of improved cookstoves; primarily the performance efficiency and reduction of emissions. Unfortunately, as published literature has highlighted, the trade-offs that result from placing such a concentrated emphasis on these technical objectives is that improved cookstoves lack the same level of usability as the traditional cookstoves. Thus, users often return to using their traditional stoves and the potential impact of the improved cookstoves is never fully realized. In order for improved cookstoves to have greater impact, there must be better balance between the two competing design objectives of technical capabilities and usability. This paper explores the challenges and benefits associated with achieving the appropriate balance, and demonstrates its application through the modification of a traditional cookstove used in the Tambogrande region of Peru. This modification includes an inexpensive set of pot skirts that integrate directly with the traditional stove. These pot skirts allow for varying sizes and number of pots, and the use of traditional fuels. Laboratory testing, using the Water Boiling Test (WBT), identified the skirts' technical improvements: 41.7% increased thermal efficiency, 32.7% decreased fuel consumption, 28.8% decreased time to boil. Field testing was performed to determine the pot skirts acceptance and compatibility with the traditional cookstoves, with over 75% of the participants recognizing some type of benefit. Although the technical improvements of these pot skirts are less than other cookstoves on the market, the higher levels of usability are likely to lead to a more positive end-user reaction, which could potentially lead to higher rates of adoption and impact. Though these results are primarily focused on the application of improved cookstoves, the need for more balance between technical and user objectives is applicable to nearly all products being designed for the developing world.

Suggested Citation

  • Thacker, Kendall S. & Barger, K. McCall & Mattson, Christopher A., 2017. "Balancing technical and user objectives in the redesign of a peruvian cookstove," Development Engineering, Elsevier, vol. 2(C), pages 12-19.
    • Handle: RePEc:eee:deveng:v:2:y:2017:i:c:p:12-19
    DOI: 10.1016/j.deveng.2016.05.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S2352728515300749
    Download Restriction: no
    File URL: https://libkey.io/10.1016/j.deveng.2016.05.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. David R. Lee, 2005. "Agricultural Sustainability and Technology Adoption: Issues and Policies for Developing Countries," American Journal of Agricultural Economics, Agricultural and Applied Economics Association, vol. 87(5), pages 1325-1334.
    2. Tan Li & Larry D. Qiu, 2014. "IPR, Trade, FDI, and Technology Transfer," Frontiers of Economics in China-Selected Publications from Chinese Universities, Higher Education Press, vol. 9(4), pages 529-555, December.
    3. Ruiz-Mercado, Ilse & Masera, Omar & Zamora, Hilda & Smith, Kirk R., 2011. "Adoption and sustained use of improved cookstoves," Energy Policy, Elsevier, vol. 39(12), pages 7557-7566.
    4. Lara M. P. Bryant, 2014. "Geospatial Technology Curriculum Development," International Journal of Applied Geospatial Research (IJAGR), IGI Global, vol. 5(1), pages 60-69, January.
    5. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2014. "A comprehensive review on biomass cookstoves and a systematic approach for modern cookstove design," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 580-603.
    6. Ayoub, Josef & Brunet, Eric, 1996. "Performance of large portable metal woodstoves for community kitchens," Renewable Energy, Elsevier, vol. 7(1), pages 71-80.
    7. Nicholas A Phelps & Sharifah R S Dawood, 2014. "Untangling the Spaces of High Technology in Malaysia," Environment and Planning C, , vol. 32(5), pages 896-915, October.
    8. Bielecki, Christopher & Wingenbach, Gary, 2014. "Rethinking improved cookstove diffusion programs: A case study of social perceptions and cooking choices in rural Guatemala," Energy Policy, Elsevier, vol. 66(C), pages 350-358.
    9. Sutar, Kailasnath B. & Kohli, Sangeeta & Ravi, M.R. & Ray, Anjan, 2015. "Biomass cookstoves: A review of technical aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1128-1166.
    10. Jan, Inayatullah, 2012. "What makes people adopt improved cookstoves? Empirical evidence from rural northwest Pakistan," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3200-3205.
    11. Besley, Timothy & Case, Anne, 1993. "Modeling Technology Adoption in Developing Countries," American Economic Review, American Economic Association, vol. 83(2), pages 396-402, May.
    12. Yann Ferrand & Christina M. L. Kelton & Ke Chen & Howard A. Stafford, 2009. "Biotechnology in Cincinnati," Economic Development Quarterly, , vol. 23(2), pages 127-140, May.
    13. Jeremy C. Bellah & Kunpeng Li & Pamela J. Zelbst & Qiannong Gu, 2014. "Use of RFID Technology for Automatic Job Costing," International Journal of Information Systems and Social Change (IJISSC), IGI Global, vol. 5(2), pages 53-68, April.
    14. Sivakumaran, Karthik & Li, Yuwei & Cassidy, Michael & Madanat, Samer, 2014. "Access and the choice of transit technology," Transportation Research Part A: Policy and Practice, Elsevier, vol. 59(C), pages 204-221.
    15. ., 2014. "Technological evolution and innovation networks," Chapters, in: Simulating Innovation, chapter 7, pages 192-238, Edward Elgar Publishing.
    16. Troncoso, Karin & Castillo, Alicia & Masera, Omar & Merino, Leticia, 2007. "Social perceptions about a technological innovation for fuelwood cooking: Case study in rural Mexico," Energy Policy, Elsevier, vol. 35(5), pages 2799-2810, May.
    17. Raman, P. & Ram, N.K. & Murali, J., 2014. "Improved test method for evaluation of bio-mass cook-stoves," Energy, Elsevier, vol. 71(C), pages 479-495.
    18. Viktor Wang, 2009. "Effective Teaching with Technology in Adult Education," International Journal of Web-Based Learning and Teaching Technologies (IJWLTT), IGI Global, vol. 4(4), pages 17-31, October.
    19. Parente, Stephen L & Prescott, Edward C, 1994. "Barriers to Technology Adoption and Development," Journal of Political Economy, University of Chicago Press, vol. 102(2), pages 298-321, April.
    20. García-Frapolli, Eduardo & Schilmann, Astrid & Berrueta, Victor M. & Riojas-Rodríguez, Horacio & Edwards, Rufus D. & Johnson, Michael & Guevara-Sanginés, Alejandro & Armendariz, Cynthia & Masera, Omar, 2010. "Beyond fuelwood savings: Valuing the economic benefits of introducing improved biomass cookstoves in the Purépecha region of Mexico," Ecological Economics, Elsevier, vol. 69(12), pages 2598-2605, October.
    21. Jan W.S. Fredriks & Bartjan J.W. Pennink & Togar M. Simatupang & Joko Siswanto, 2014. "Modelling a technology push by using hybrid franchising," International Journal of Entrepreneurship and Small Business, Inderscience Enterprises Ltd, vol. 22(1), pages 64-88.
    22. ., 2014. "The fundamental forces: technology, tastes and values," Chapters, in: The Political Economy of Status, chapter 3, pages 45-57, Edward Elgar Publishing.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Judith Ramírez-Candia & Maria Dolores Curt & Javier Domínguez, 2022. "Understanding the Access to Fuels and Technologies for Cooking in Peru," Energies, MDPI, vol. 15(4), pages 1-25, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Murray, Portia & Orehounig, Kristina & Grosspietsch, David & Carmeliet, Jan, 2018. "A comparison of storage systems in neighbourhood decentralized energy system applications from 2015 to 2050," Applied Energy, Elsevier, vol. 231(C), pages 1285-1306.
    2. Malla, Sunil & Timilsina, Govinda R, 2014. "Household cooking fuel choice and adoption of improved cookstoves in developing countries : a review," Policy Research Working Paper Series 6903, The World Bank.
    3. Ferreira, Agmar & Kunh, Sheila S. & Fagnani, Kátia C. & De Souza, Tiago A. & Tonezer, Camila & Dos Santos, Geocris Rodrigues & Coimbra-Araújo, Carlos H., 2018. "Economic overview of the use and production of photovoltaic solar energy in brazil," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 181-191.
    4. Edwina Fingleton-Smith, 2022. "Smoke and mirrors—the complexities of cookstove adoption and use in Kenya," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(3), pages 3926-3946, March.
    5. Jan, Inayatullah & Lohano, Heman Das, 2021. "Uptake of energy efficient cookstoves in Pakistan," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    6. Bramstoft, Rasmus & Pizarro-Alonso, Amalia & Jensen, Ida Græsted & Ravn, Hans & Münster, Marie, 2020. "Modelling of renewable gas and renewable liquid fuels in future integrated energy systems," Applied Energy, Elsevier, vol. 268(C).
    7. Lindgren, Samantha, 2021. "Cookstove implementation and Education for Sustainable Development: A review of the field and proposed research agenda," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    8. Bielecki, Christopher & Wingenbach, Gary, 2014. "Rethinking improved cookstove diffusion programs: A case study of social perceptions and cooking choices in rural Guatemala," Energy Policy, Elsevier, vol. 66(C), pages 350-358.
    9. Petkov, Ivalin & Gabrielli, Paolo, 2020. "Power-to-hydrogen as seasonal energy storage: an uncertainty analysis for optimal design of low-carbon multi-energy systems," Applied Energy, Elsevier, vol. 274(C).
    10. Duscha, Vicki & Fougeyrollas, Arnaud & Nathani, Carsten & Pfaff, Matthias & Ragwitz, Mario & Resch, Gustav & Schade, Wolfgang & Breitschopf, Barbara & Walz, Rainer, 2016. "Renewable energy deployment in Europe up to 2030 and the aim of a triple dividend," Energy Policy, Elsevier, vol. 95(C), pages 314-323.
    11. Khandelwal, Meena & Hill, Matthew E. & Greenough, Paul & Anthony, Jerry & Quill, Misha & Linderman, Marc & Udaykumar, H.S., 2017. "Why Have Improved Cook-Stove Initiatives in India Failed?," World Development, Elsevier, vol. 92(C), pages 13-27.
    12. Ogbomo, Osarumen O. & Amalu, Emeka H. & Ekere, N.N. & Olagbegi, P.O., 2017. "A review of photovoltaic module technologies for increased performance in tropical climate," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1225-1238.
    13. Mehetre, Sonam A. & Panwar, N.L. & Sharma, Deepak & Kumar, Himanshu, 2017. "Improved biomass cookstoves for sustainable development: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 672-687.
    14. Troncoso, Karin & Segurado, Patricia & Aguilar, Margarita & Soares da Silva, Agnes, 2019. "Adoption of LPG for cooking in two rural communities of Chiapas, Mexico," Energy Policy, Elsevier, vol. 133(C).
    15. Vania Vigolo & Rezarta Sallaku & Federico Testa, 2018. "Drivers and Barriers to Clean Cooking: A Systematic Literature Review from a Consumer Behavior Perspective," Sustainability, MDPI, vol. 10(11), pages 1-21, November.
    16. Atteridge, Aaron & Weitz, Nina, 2017. "A political economy perspective on technology innovation in the Kenyan clean cookstove sector," Energy Policy, Elsevier, vol. 110(C), pages 303-312.
    17. Zhang, Zongxi & Zhang, Yixiang & Zhou, Yuguang & Ahmad, Riaz & Pemberton-Pigott, Crispin & Annegarn, Harold & Dong, Renjie, 2017. "Systematic and conceptual errors in standards and protocols for thermal performance of biomass stoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 1343-1354.
    18. Evelyn L. Rhodes & Robert Dreibelbis & Elizabeth Klasen & Neha Naithani & Joyce Baliddawa & Diana Menya & Subarna Khatry & Stephanie Levy & James M. Tielsch & J. Jaime Miranda & Caitlin Kennedy & Will, 2014. "Behavioral Attitudes and Preferences in Cooking Practices with Traditional Open-Fire Stoves in Peru, Nepal, and Kenya: Implications for Improved Cookstove Interventions," IJERPH, MDPI, vol. 11(10), pages 1-17, October.
    19. Antonelli, Marco & Barsali, Stefano & Desideri, Umberto & Giglioli, Romano & Paganucci, Fabrizio & Pasini, Gianluca, 2017. "Liquid air energy storage: Potential and challenges of hybrid power plants," Applied Energy, Elsevier, vol. 194(C), pages 522-529.
    20. Sutar, Kailasnath B. & Kohli, Sangeeta & Ravi, M.R. & Ray, Anjan, 2015. "Biomass cookstoves: A review of technical aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1128-1166.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:deveng:v:2:y:2017:i:c:p:12-19. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/development-engineering .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.