IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v88y2011i12p5164-5172.html
   My bibliography  Save this article

System analysis in a European perspective of new industrial cooling supply in a CHP system

Author

Listed:
  • Svensson, Inger-Lise
  • Moshfegh, Bahram

Abstract

In the municipality of Södertälje two large industries use much of the electricity, district heating (DH) and chilled water in the area. The Södertälje energy system is not isolated, however, but is connected to the DH systems of southern and central Stockholm, and a change in the Södertälje energy system will also influence the connected energy systems in Stockholm. The cooling demand in Södertälje is currently covered by lake water cooling and compression chillers, but in order to reduce the use of electricity, conversion to absorption cooling or increased lake water cooling can be considered. The large combined heat and power (CHP) plant in Södertälje is not used to its full potential today, but investment in absorption cooling and/or a cold condenser unit integrated with the CHP plant could increase the plant’s operation hours. In this paper the system effects of introducing new industrial cooling supply in Södertälje has been investigated through optimizations of a model including both the industries and the district heating supply in Södertälje and Stockholm. The results show that, independently of whether condensing power production is feasible in the CHP plant or not, investments in both increased lake water cooling and absorption cooling are profitable. A sensitivity analysis of how energy market prices affect the results shows that even though the system cost will change depending on energy market prices, the optimum cooling technology mix will remain the same. However, a sensitivity analysis of the transfer DH capacity between the Södertälje and Stockholm energy systems shows that if the transfer DH capacity is increased, absorption cooling will be less profitable since more heat can be sold from Södertälje to Stockholm while at the same time reducing the use of fuel resources.

Suggested Citation

  • Svensson, Inger-Lise & Moshfegh, Bahram, 2011. "System analysis in a European perspective of new industrial cooling supply in a CHP system," Applied Energy, Elsevier, vol. 88(12), pages 5164-5172.
    • Handle: RePEc:eee:appene:v:88:y:2011:i:12:p:5164-5172
    DOI: 10.1016/j.apenergy.2011.07.026
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261911004715
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2011.07.026?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nilsson, K. & Söderström, M. & Karlsson, B.G., 1994. "MIND optimization reduces the system cost at a refinery," Energy, Elsevier, vol. 19(1), pages 45-54.
    2. Karlsson, Magnus & Gebremedhin, Alemayehu & Klugman, Sofia & Henning, Dag & Moshfegh, Bahram, 2009. "Regional energy system optimization - Potential for a regional heat market," Applied Energy, Elsevier, vol. 86(4), pages 441-451, April.
    3. Wetterlund, Elisabeth & Söderström, Mats, 2010. "Biomass gasification in district heating systems - The effect of economic energy policies," Applied Energy, Elsevier, vol. 87(9), pages 2914-2922, September.
    4. Thollander, Patrik & Mardan, Nawzad & Karlsson, Magnus, 2009. "Optimization as investment decision support in a Swedish medium-sized iron foundry - A move beyond traditional energy auditing," Applied Energy, Elsevier, vol. 86(4), pages 433-440, April.
    5. Trygg, Louise & Amiri, Shahnaz, 2007. "European perspective on absorption cooling in a combined heat and power system - A case study of energy utility and industries in Sweden," Applied Energy, Elsevier, vol. 84(12), pages 1319-1337, December.
    6. Svensson, Inger-Lise & Jönsson, Johanna & Berntsson, Thore & Moshfegh, Bahram, 2008. "Excess heat from kraft pulp mills: Trade-offs between internal and external use in the case of Sweden--Part 1: Methodology," Energy Policy, Elsevier, vol. 36(11), pages 4178-4185, November.
    7. Axelsson, E. & Harvey, S. & Berntsson, T., 2009. "A tool for creating energy market scenarios for evaluation of investments in energy intensive industry," Energy, Elsevier, vol. 34(12), pages 2069-2074.
    8. Jönsson, Johanna & Svensson, Inger-Lise & Berntsson, Thore & Moshfegh, Bahram, 2008. "Excess heat from kraft pulp mills: Trade-offs between internal and external use in the case of Sweden--Part 2: Results for future energy market scenarios," Energy Policy, Elsevier, vol. 36(11), pages 4186-4197, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Broberg Viklund, Sarah & Karlsson, Magnus, 2015. "Industrial excess heat use: Systems analysis and CO2 emissions reduction," Applied Energy, Elsevier, vol. 152(C), pages 189-197.
    2. Valerie Eveloy & Dereje S. Ayou, 2019. "Sustainable District Cooling Systems: Status, Challenges, and Future Opportunities, with Emphasis on Cooling-Dominated Regions," Energies, MDPI, vol. 12(2), pages 1-64, January.
    3. Olsson, Linda & Wetterlund, Elisabeth & Söderström, Mats, 2015. "Assessing the climate impact of district heating systems with combined heat and power production and industrial excess heat," Resources, Conservation & Recycling, Elsevier, vol. 96(C), pages 31-39.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Broberg Viklund, Sarah & Karlsson, Magnus, 2015. "Industrial excess heat use: Systems analysis and CO2 emissions reduction," Applied Energy, Elsevier, vol. 152(C), pages 189-197.
    2. Thollander, P. & Svensson, I.L. & Trygg, L., 2010. "Analyzing variables for district heating collaborations between energy utilities and industries," Energy, Elsevier, vol. 35(9), pages 3649-3656.
    3. Wetterlund, Elisabeth & Söderström, Mats, 2010. "Biomass gasification in district heating systems - The effect of economic energy policies," Applied Energy, Elsevier, vol. 87(9), pages 2914-2922, September.
    4. Mardan, Nawzad & Klahr, Roger, 2012. "Combining optimisation and simulation in an energy systems analysis of a Swedish iron foundry," Energy, Elsevier, vol. 44(1), pages 410-419.
    5. Hafezi, Reza & Akhavan, AmirNaser & Pakseresht, Saeed & Wood, David A., 2019. "A Layered Uncertainties Scenario Synthesizing (LUSS) model applied to evaluate multiple potential long-run outcomes for Iran's natural gas exports," Energy, Elsevier, vol. 169(C), pages 646-659.
    6. Bertrand, Alexandre & Mian, Alberto & Kantor, Ivan & Aggoune, Riad & Maréchal, François, 2019. "Regional waste heat valorisation: A mixed integer linear programming method for energy service companies," Energy, Elsevier, vol. 167(C), pages 454-468.
    7. Kavvadias, Konstantinos C. & Quoilin, Sylvain, 2018. "Exploiting waste heat potential by long distance heat transmission: Design considerations and techno-economic assessment," Applied Energy, Elsevier, vol. 216(C), pages 452-465.
    8. Li, Yingjian & Li, Jiezhi & Qiu, Qi & Xu, Yafei, 2010. "Energy auditing and energy conservation potential for glass works," Applied Energy, Elsevier, vol. 87(8), pages 2438-2446, August.
    9. Morandin, Matteo & Hackl, Roman & Harvey, Simon, 2014. "Economic feasibility of district heating delivery from industrial excess heat: A case study of a Swedish petrochemical cluster," Energy, Elsevier, vol. 65(C), pages 209-220.
    10. Svensson, Inger-Lise & Jönsson, Johanna & Berntsson, Thore & Moshfegh, Bahram, 2008. "Excess heat from kraft pulp mills: Trade-offs between internal and external use in the case of Sweden--Part 1: Methodology," Energy Policy, Elsevier, vol. 36(11), pages 4178-4185, November.
    11. Gebremedhin, Alemayehu, 2014. "Optimal utilisation of heat demand in district heating system—A case study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 230-236.
    12. Marshman, D.J. & Chmelyk, T. & Sidhu, M.S. & Gopaluni, R.B. & Dumont, G.A., 2010. "Energy optimization in a pulp and paper mill cogeneration facility," Applied Energy, Elsevier, vol. 87(11), pages 3514-3525, November.
    13. Amiri, Shahnaz & Weinberger, Gottfried, 2018. "Increased cogeneration of renewable electricity through energy cooperation in a Swedish district heating system - A case study," Renewable Energy, Elsevier, vol. 116(PA), pages 866-877.
    14. Karner, Katharina & Theissing, Matthias & Kienberger, Thomas, 2017. "Modeling of energy efficiency increase of urban areas through synergies with industries," Energy, Elsevier, vol. 136(C), pages 201-209.
    15. Werner, Sven, 2017. "District heating and cooling in Sweden," Energy, Elsevier, vol. 126(C), pages 419-429.
    16. Ivner, Jenny & Broberg Viklund, Sarah, 2015. "Effect of the use of industrial excess heat in district heating on greenhouse gas emissions: A systems perspective," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 81-87.
    17. Puig-Arnavat, Maria & Bruno, Joan Carles & Coronas, Alberto, 2014. "Modeling of trigeneration configurations based on biomass gasification and comparison of performance," Applied Energy, Elsevier, vol. 114(C), pages 845-856.
    18. Rudberg, Martin & Waldemarsson, Martin & Lidestam, Helene, 2013. "Strategic perspectives on energy management: A case study in the process industry," Applied Energy, Elsevier, vol. 104(C), pages 487-496.
    19. Abraham Castro Garcia & Shuo Cheng & Jeffrey S. Cross, 2020. "Solvolysis of Kraft Lignin to Bio-Oil: A Critical Review," Clean Technol., MDPI, vol. 2(4), pages 1-16, December.
    20. Svensson, Elin & Berntsson, Thore & Strömberg, Ann-Brith, 2009. "Benefits of using an optimization methodology for identifying robust process integration investments under uncertainty--A pulp mill example," Energy Policy, Elsevier, vol. 37(3), pages 813-824, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:88:y:2011:i:12:p:5164-5172. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.