IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v321y2022ics0306261922006699.html
   My bibliography  Save this article

Analysis and optimization of induction heating processes by focusing the inner magnetism of the coil

Author

Listed:
  • Cui, Peng
  • Zhu, Wenbo
  • Ji, Hongjun
  • Chen, Hongtao
  • Hang, Chunjin
  • Li, Mingyu

Abstract

Induction heating has been widely applied in the energy and manufacturing industry for its energy-saving, low-cost, local high-efficiency heating, and noncontact benefits. However, the energy efficiency of the induced magnetic field is normally limited for the magnetic scattering effect. To improve the energy and hence heating efficiency, a focused induction heating method (FIHM) has been proposed in this work by using the conical ferrite to focus inner magnetic of the coil. Meanwhile, a numerical model has been established to predict the electromagnetic and thermal distribution during the FIHM process. Traditional induction heating head and two focused induction heating heads (solid ferrite head and drilled-ferrite head) are compared to reveal the influence mechanism of different induction heating heads on the soldering of the pin-through-hole. The results show that the FIHM with drilled-ferrite head can improve the heating efficiency significantly by approximately 6.5-fold when compared to traditional induction heating, leading to a corresponding outstanding temperature increase over 296 °C within 1.5 s. Furthermore, the detailed effect mechanism for the six structural parameters of the FIHM on the temperature and magnetic field is studied. This study finds that the distance from the ferrite to the tin ring has the most significant effect, causing a temperature difference of about 560 °C. Finally, all these findings have been validated by the soldering experiments, and robust interconnection of deep pin-through-hole joints has been achieved through FIHM without voids. The work provides a theoretical basis and practical guidance for induction heating techniques with excellent electromagnetics and engineering application potential.

Suggested Citation

  • Cui, Peng & Zhu, Wenbo & Ji, Hongjun & Chen, Hongtao & Hang, Chunjin & Li, Mingyu, 2022. "Analysis and optimization of induction heating processes by focusing the inner magnetism of the coil," Applied Energy, Elsevier, vol. 321(C).
    • Handle: RePEc:eee:appene:v:321:y:2022:i:c:s0306261922006699
    DOI: 10.1016/j.apenergy.2022.119316
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261922006699
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2022.119316?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ning An & Mingxing Du & Zhen Hu & Kexin Wei, 2018. "A High-Precision Adaptive Thermal Network Model for Monitoring of Temperature Variations in Insulated Gate Bipolar Transistor (IGBT) Modules," Energies, MDPI, vol. 11(3), pages 1-16, March.
    2. Bera, Achinta & Babadagli, Tayfun, 2015. "Status of electromagnetic heating for enhanced heavy oil/bitumen recovery and future prospects: A review," Applied Energy, Elsevier, vol. 151(C), pages 206-226.
    3. Yeong, S.P. & Law, M.C. & You, K.Y. & Chan, Y.S. & Lee, V.C.-C., 2019. "A coupled electromagnetic-thermal-fluid-kinetic model for microwave-assisted production of Palm Fatty Acid Distillate biodiesel," Applied Energy, Elsevier, vol. 237(C), pages 457-475.
    4. Patankar, Neha & Fell, Harrison G. & Rodrigo de Queiroz, Anderson & Curtis, John & DeCarolis, Joseph F., 2022. "Improving the representation of energy efficiency in an energy system optimization model," Applied Energy, Elsevier, vol. 306(PB).
    5. Kaur, R. & Newborough, M. & Probert, S.D., 1993. "Multi-purpose mathematical model for electromagnetic-heating processes," Applied Energy, Elsevier, vol. 44(4), pages 337-386.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tamás Orosz & Miklós Csizmadia & Balázs Nagy, 2024. "Numerical Modeling and Optimization of a Quasi-Resonant Inverter-Based Induction Heating Process of a Magnetic Gear," Energies, MDPI, vol. 17(16), pages 1-15, August.
    2. Cui, Peng & Zhu, Wenbo & Li, Haosong & Hu, Shaowei & Hu, Bo & Yang, Fan & Hang, Chunjin & Li, Mingyu, 2023. "Ultra-efficient localized induction heating by dual-ferrite synchronous magnetic field focusing," Applied Energy, Elsevier, vol. 348(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yao, Yue & Sun, Deqiang & Xu, Jin-Hua & Wang, Bin & Peng, Guohong & Sun, Bingmei, 2023. "Evaluation of enhanced oil recovery methods for mature continental heavy oil fields in China based on geology, technology and sustainability criteria," Energy, Elsevier, vol. 278(PB).
    2. Yang, Huayu & Yan, Bowen & Chen, Wei & Fan, Daming, 2023. "Prediction and innovation of sustainable continuous flow microwave processing based on numerical simulations: A systematic review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 175(C).
    3. Gourich, Wail & Chan, Eng-Seng & Ng, Wei Zhe & Obon, Aaron Anthony & Maran, Kireshwen & Ong, Yi Hui & Lee, Chin Loong & Tan, Jully & Song, Cher Pin, 2022. "Life cycle benefits of enzymatic biodiesel co-produced in palm oil mills from sludge palm oil as renewable fuel for rural electrification," Applied Energy, Elsevier, vol. 325(C).
    4. Dong, Xiaohu & Liu, Huiqing & Chen, Zhangxin & Wu, Keliu & Lu, Ning & Zhang, Qichen, 2019. "Enhanced oil recovery techniques for heavy oil and oilsands reservoirs after steam injection," Applied Energy, Elsevier, vol. 239(C), pages 1190-1211.
    5. Li, He & Shi, Shiliang & Lin, Baiquan & Lu, Jiexin & Ye, Qing & Lu, Yi & Wang, Zheng & Hong, Yidu & Zhu, Xiangnan, 2019. "Effects of microwave-assisted pyrolysis on the microstructure of bituminous coals," Energy, Elsevier, vol. 187(C).
    6. Oscar E. Medina & Yira Hurtado & Cristina Caro-Velez & Farid B. Cortés & Masoud Riazi & Sergio H. Lopera & Camilo A. Franco, 2019. "Improvement of Steam Injection Processes Through Nanotechnology: An Approach through in Situ Upgrading and Foam Injection," Energies, MDPI, vol. 12(24), pages 1-21, December.
    7. Cui, Ziang & Sun, Mengdi & Mohammadian, Erfan & Hu, Qinhong & Liu, Bo & Ostadhassan, Mehdi & Yang, Wuxing & Ke, Yubin & Mu, Jingfu & Ren, Zijie & Pan, Zhejun, 2024. "Characterizing microstructural evolutions in low-mature lacustrine shale: A comparative experimental study of conventional heat, microwave, and water-saturated microwave stimulations," Energy, Elsevier, vol. 294(C).
    8. Soiket, Md.I.H. & Oni, A.O. & Gemechu, E.D. & Kumar, A., 2019. "Life cycle assessment of greenhouse gas emissions of upgrading and refining bitumen from the solvent extraction process," Applied Energy, Elsevier, vol. 240(C), pages 236-250.
    9. Wang, Zhengxu & Gao, Deli & Diao, Binbin & Zhang, Wei, 2020. "The influence of casing properties on performance of radio frequency heating for oil sands recovery," Applied Energy, Elsevier, vol. 261(C).
    10. Lan, Wenjian & Wang, Hanxiang & Liu, Qihu & Zhang, Xin & Chen, Jingkai & Li, Ziling & Feng, Kun & Chen, Shengshan, 2021. "Investigation on the microwave heating technology for coalbed methane recovery," Energy, Elsevier, vol. 237(C).
    11. Huayu Gao & Zheng Wei & Xiang Zhang & Pei Wang & Yuwei Lei & Hui Fu & Daming Zhou, 2023. "Optimum Design of a Reusable Spacecraft Launch System Using Electromagnetic Energy: An Artificial Intelligence GSO Algorithm," Energies, MDPI, vol. 16(23), pages 1-28, November.
    12. Tipole, Pralhad & Karthikeyan, A. & Bhojwani, Virendra & Patil, Abhay & Oak, Ninad & Ponatil, Amal & Nagori, Palash, 2016. "Applying a magnetic field on liquid line of vapour compression system is a novel technique to increase a performance of the system," Applied Energy, Elsevier, vol. 182(C), pages 376-382.
    13. Zhang, Qitao & Liu, Wenchao & Dahi Taleghani, Arash, 2022. "Numerical study on non-Newtonian Bingham fluid flow in development of heavy oil reservoirs using radiofrequency heating method," Energy, Elsevier, vol. 239(PE).
    14. Hugo Alejandro García-Duarte & María Carolina Ruiz-Cañas & Romel Antonio Pérez-Romero, 2022. "Innovative Experimental Design for the Evaluation of Nanofluid-Based Solvent as a Hybrid Technology for Optimizing Cyclic Steam Stimulation Applications," Energies, MDPI, vol. 16(1), pages 1-21, December.
    15. Yang, Huayu & Zhang, Yuhao & Gao, Wenhua & Yan, Bowen & Zhao, Jianxin & Zhang, Hao & Chen, Wei & Fan, Daming, 2021. "Steam replacement strategy using microwave resonance: A future system for continuous-flow heating applications," Applied Energy, Elsevier, vol. 283(C).
    16. Jia Liu & Jianguo Wang & Chunfai Leung & Feng Gao, 2018. "A Fully Coupled Numerical Model for Microwave Heating Enhanced Shale Gas Recovery," Energies, MDPI, vol. 11(6), pages 1-28, June.
    17. Zhou, Xiang & Yuan, Qingwang & Rui, Zhenhua & Wang, Hanyi & Feng, Jianwei & Zhang, Liehui & Zeng, Fanhua, 2019. "Feasibility study of CO2 huff 'n' puff process to enhance heavy oil recovery via long core experiments," Applied Energy, Elsevier, vol. 236(C), pages 526-539.
    18. Erdila Indriani & Sudjati Rachmat & Leksono Mucharram & Agus Yodi Gunawan & Munir Achmad & Anugerah Solida, 2018. "The Thermal Encroachment of Microwave Heating with Nano Ferro Fluids Injection on Heavy Oil Deposits," Modern Applied Science, Canadian Center of Science and Education, vol. 12(9), pages 1-1, September.
    19. Samuel O. de Almeida & Grigori Chapiro & Pacelli L. J. Zitha, 2022. "Down-Hole Electromagnetic Heating of Deep Aquifers for Renewable Energy Storage," Energies, MDPI, vol. 15(11), pages 1-13, May.
    20. Suogui Shang & Kechao Gao & Xinghua Zhang & Qibin Zhao & Guangfeng Chen & Liang Tao & Bin Song & Hongxing Yuan & Yonghai Gao, 2024. "Research on the Temperature Distribution in Electrically Heated Offshore Heavy Oil Wellbores," Energies, MDPI, vol. 17(5), pages 1-17, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:321:y:2022:i:c:s0306261922006699. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.