Effect of pressure drawdown rate on the fluid production behaviour from methane hydrate-bearing sediments

Methane hydrates have been considered as the future source of energy due to its vast resource volume and high energy density. Depressurization has been demonstrated to be a technical feasible method in producing gas from hydrate reservoirs in the past field production tests. However, major technical challenges, i.e. low gas production rate, excessive water production, and uncontrollable sand production remain. Such undesirable production behaviour is directly linked to one key process variable, the rate of pressure drawdown. It controls the rate of hydrate dissociation and governs the multiphase fluid flow in sandy media. However, precise control of bottom hole pressure in large-scale production tests is difficult and it remains unclear how different drawdown rates affect the fluid production behaviour. Herein, we performed a series of hydrate formation experiments synthesizing aqueous-rich methane hydrate-bearing sediments with hydrate saturation above 40% and subsequently a series of depressurization experiments employing different controlled drawdown rates to dissociate the hydrate-bearing samples. Cumulative production of gas and water were monitored during the depressurization. The goals of the experiments were to examine the fluid production rate, the recovery ratio, and the temperature response in the hydrate-bearing system under different drawdown strategies. Cumulative water production rate increases linearly with drawdown rate, while cumulative gas production rate is directly linked to the hydrate dissociation rate, which is controlled by heat transfer at the early stage and dissociation kinetics toward the final stage. Water gas ratio can be regulated within a threshold by employing a slow drawdown rate. In addition, the final recovery of fluid is not controlled by the drawdown rates but is related to the final stable conditions of pressure and temperature. Our findings expand the understanding of fluid production behaviour from hydrate-bearing sediments and provide guidance in optimizing production strategies and in assessing the fluid production potential for future experiments and field production tests from hydrate reservoirs.