IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v256y2019ics0306261919315995.html
   My bibliography  Save this article

High performance yeast-based microbial fuel cells by surfactant-mediated gold nanoparticles grown atop a carbon felt anode

Author

Listed:
  • Duarte, Kimberley D.Z.
  • Frattini, Domenico
  • Kwon, Yongchai

Abstract

The behavior of gold nanoparticles grown atop a polyethyleneimine functionalized carbon felt substrate is explored for the first time. This green synthesis growth process utilizes surface-bound seeds and an exploration of the effect of a surfactant ligand mediator on the directional growth of the gold nanoparticles. Rough, irregularly shaped, and wide-spread gold nanoflower structures are developed from the seeds atop the hydrophilic functionalized carbon felt fibers through this process. Nanoparticle growth is acquired by the adaptation of a simple solution consisting of a gold salt reducer (L-ascorbic acid), nanoparticle initiator (chloroauric acid), and a strong ligand (4-mercaptobenzoic acid, MBA). Nanoparticle growth time and the concentration of the directional mediating surfactant MBA are varied to optimize the synthesis. The gold nanoparticle structures are examined through X-ray photoelectron spectroscopy and high-resolution scanning electron microscopy. Furthermore, the effects of attachment, biofilm formation, and coverage activity on the performance of a yeast-based microbial fuel cell are electrochemically evaluated. Results show both favorable and unfavorable conditions for yeast biofilm inhabitancy which are verified through electron microscopy, and a relationship between the surface chemical compositions, incomplete gold salt reduction, presence of residual sulphur, and effective yeast active-surface coverage on modified carbon felt is demonstrated. The best power density achieved was 2771 ± 569 mW·m−2 for the polyethyleneimine-modified carbon felt with gold nanoparticles prepared with 715 μM MBA for 30 min; a value higher than many benchmarks referenced in literature representing a new contribution to the field.

Suggested Citation

  • Duarte, Kimberley D.Z. & Frattini, Domenico & Kwon, Yongchai, 2019. "High performance yeast-based microbial fuel cells by surfactant-mediated gold nanoparticles grown atop a carbon felt anode," Applied Energy, Elsevier, vol. 256(C).
    • Handle: RePEc:eee:appene:v:256:y:2019:i:c:s0306261919315995
    DOI: 10.1016/j.apenergy.2019.113912
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261919315995
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2019.113912?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Anna Sekrecka-Belniak & Renata Toczyłowska-Mamińska, 2018. "Fungi-Based Microbial Fuel Cells," Energies, MDPI, vol. 11(10), pages 1-18, October.
    2. Vesselin Krassimirov Krastev & Giacomo Falcucci, 2018. "Simulating Engineering Flows through Complex Porous Media via the Lattice Boltzmann Method," Energies, MDPI, vol. 11(4), pages 1-14, March.
    3. Christwardana, Marcelinus & Frattini, Domenico & Accardo, Grazia & Yoon, Sung Pil & Kwon, Yongchai, 2018. "Early-stage performance evaluation of flowing microbial fuel cells using chemically treated carbon felt and yeast biocatalyst," Applied Energy, Elsevier, vol. 222(C), pages 369-382.
    4. Hidalgo, Diana & Tommasi, Tonia & Bocchini, Sergio & Chiolerio, Alessandro & Chiodoni, Angelica & Mazzarino, Italo & Ruggeri, Bernardo, 2016. "Surface modification of commercial carbon felt used as anode for Microbial Fuel Cells," Energy, Elsevier, vol. 99(C), pages 193-201.
    5. Alatraktchi, Fatima AlZahra’a & Zhang, Yifeng & Angelidaki, Irini, 2014. "Nanomodification of the electrodes in microbial fuel cell: Impact of nanoparticle density on electricity production and microbial community," Applied Energy, Elsevier, vol. 116(C), pages 216-222.
    6. Jannelli, Nicole & Anna Nastro, Rosa & Cigolotti, Viviana & Minutillo, Mariagiovanna & Falcucci, Giacomo, 2017. "Low pH, high salinity: Too much for microbial fuel cells?," Applied Energy, Elsevier, vol. 192(C), pages 543-550.
    7. Christwardana, Marcelinus & Frattini, Domenico & Duarte, Kimberley D.Z. & Accardo, Grazia & Kwon, Yongchai, 2019. "Carbon felt molecular modification and biofilm augmentation via quorum sensing approach in yeast-based microbial fuel cells," Applied Energy, Elsevier, vol. 238(C), pages 239-248.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Alawadhi, Hussain & Elsaid, Khaled & Wilberforce, Tabbi & Olabi, A.G., 2021. "Graphitic carbon nitride/carbon brush composite as a novel anode for yeast-based microbial fuel cells," Energy, Elsevier, vol. 221(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Christwardana, Marcelinus & Frattini, Domenico & Duarte, Kimberley D.Z. & Accardo, Grazia & Kwon, Yongchai, 2019. "Carbon felt molecular modification and biofilm augmentation via quorum sensing approach in yeast-based microbial fuel cells," Applied Energy, Elsevier, vol. 238(C), pages 239-248.
    2. Frattini, Domenico & Accardo, Grazia & Duarte, Kimberley D.Z. & Kim, Do-Heyoung & Kwon, Yongchai, 2020. "Improved biofilm adhesion and electrochemical properties of a graphite-cement composite with silica nanoflowers versus two benchmark carbon felts," Applied Energy, Elsevier, vol. 261(C).
    3. Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Alawadhi, Hussain & Elsaid, Khaled & Wilberforce, Tabbi & Olabi, A.G., 2021. "Graphitic carbon nitride/carbon brush composite as a novel anode for yeast-based microbial fuel cells," Energy, Elsevier, vol. 221(C).
    4. Christwardana, Marcelinus & Frattini, Domenico & Accardo, Grazia & Yoon, Sung Pil & Kwon, Yongchai, 2018. "Early-stage performance evaluation of flowing microbial fuel cells using chemically treated carbon felt and yeast biocatalyst," Applied Energy, Elsevier, vol. 222(C), pages 369-382.
    5. Sekar, Aiswarya Devi & Jayabalan, Tamilmani & Muthukumar, Harshiny & Chandrasekaran, Nivedhini Iswarya & Mohamed, Samsudeen Naina & Matheswaran, Manickam, 2019. "Enhancing power generation and treatment of dairy waste water in microbial fuel cell using Cu-doped iron oxide nanoparticles decorated anode," Energy, Elsevier, vol. 172(C), pages 173-180.
    6. Xu, Lei & Wang, Bodi & Liu, Xiuhua & Yu, Wenzheng & Zhao, Yaqian, 2018. "Maximizing the energy harvest from a microbial fuel cell embedded in a constructed wetland," Applied Energy, Elsevier, vol. 214(C), pages 83-91.
    7. Iain S. Michie & Richard M. Dinsdale & Alan J. Guwy & Giuliano C. Premier, 2020. "Electrogenic Biofilm Development Determines Charge Accumulation and Resistance to pH Perturbation," Energies, MDPI, vol. 13(14), pages 1-20, July.
    8. Chouhan, Raghuraj Singh & Gandhi, Sonu & Verma, Suresh K. & Jerman, Ivan & Baker, Syed & Štrok, Marko, 2023. "Recent advancements in the development of Two-Dimensional nanostructured based anode materials for stable power density in microbial fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    9. de Ramón-Fernández, Alberto & Salar-García, M.J. & Ruiz-Fernández, Daniel & Greenman, J. & Ieropoulos, I., 2019. "Modelling the energy harvesting from ceramic-based microbial fuel cells by using a fuzzy logic approach," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    10. Wang, Yuyang & Wen, Qing & Chen, Ye & Li, Wei, 2020. "Conductive polypyrrole-carboxymethyl cellulose-titanium nitride/carbon brush hydrogels as bioanodes for enhanced energy output in microbial fuel cells," Energy, Elsevier, vol. 204(C).
    11. Giulia Massaglia & Adriano Sacco & Alain Favetto & Luciano Scaltrito & Sergio Ferrero & Roberto Mo & Candido F. Pirri & Marzia Quaglio, 2021. "Integration of Portable Sedimentary Microbial Fuel Cells in Autonomous Underwater Vehicles," Energies, MDPI, vol. 14(15), pages 1-12, July.
    12. Massaglia, Giulia & Margaria, Valentina & Sacco, Adriano & Tommasi, Tonia & Pentassuglia, Simona & Ahmed, Daniyal & Mo, Roberto & Pirri, Candido Fabrizio & Quaglio, Marzia, 2018. "In situ continuous current production from marine floating microbial fuel cells," Applied Energy, Elsevier, vol. 230(C), pages 78-85.
    13. Wang, Yuyang & Wen, Qing & Chen, Ye & Zheng, Hongtao & Wang, Shuang, 2020. "Enhanced performance of microbial fuel cell with polyaniline/sodium alginate/carbon brush hydrogel bioanode and removal of COD," Energy, Elsevier, vol. 202(C).
    14. He, Yuting & Li, Jun & Zhang, Liang & Zhu, Xun & Fu, Qian & Pang, Yuan & Liao, Qiang, 2024. "Nano zero-valent iron functioned 3D printing graphene aerogel electrode for efficient solar-driven biocatalytic methane production," Renewable Energy, Elsevier, vol. 224(C).
    15. Hu, Xiaoyi & Tan, Xinru & Shi, Xiaomin & Liu, Wenjun & Ouyang, Tiancheng, 2023. "An integrated assessment of microfluidic microbial fuel cell subjected to vibration excitation," Applied Energy, Elsevier, vol. 336(C).
    16. Fengjiao Wang & Yikun Liu & Chaoyang Hu & Anqi Shen & Shuang Liang & Bo Cai, 2018. "A Simplified Physical Model Construction Method and Gas-Water Micro Scale Flow Simulation in Tight Sandstone Gas Reservoirs," Energies, MDPI, vol. 11(6), pages 1-16, June.
    17. Jiangxu Huang & Kun He & Lei Wang, 2021. "Pore-Scale Investigation on Natural Convection Melting in a Square Cavity with Gradient Porous Media," Energies, MDPI, vol. 14(14), pages 1-19, July.
    18. Cai, Weiwei & Zhang, Zhaojing & Ren, Ge & Shen, Qiuxuan & Hou, Yanan & Ma, Anzhou & Deng, Ye & Wang, Aijie & Liu, Wenzong, 2016. "Quorum sensing alters the microbial community of electrode-respiring bacteria and hydrogen scavengers toward improving hydrogen yield in microbial electrolysis cells," Applied Energy, Elsevier, vol. 183(C), pages 1133-1141.
    19. Mashkour, Mehrdad & Rahimnejad, Mostafa & Mashkour, Mahdi & Soavi, Francesca, 2021. "Increasing bioelectricity generation in microbial fuel cells by a high-performance cellulose-based membrane electrode assembly," Applied Energy, Elsevier, vol. 282(PA).
    20. Vesselin Krassimirov Krastev & Giacomo Falcucci, 2018. "Simulating Engineering Flows through Complex Porous Media via the Lattice Boltzmann Method," Energies, MDPI, vol. 11(4), pages 1-14, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:256:y:2019:i:c:s0306261919315995. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.