IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v137y2015icp867-876.html
   My bibliography  Save this article

Computational fluid dynamics approach for performance evaluation of a solid oxide electrolysis cell for hydrogen production

Author

Listed:
  • Navasa, Maria
  • Yuan, Jinliang
  • Sundén, Bengt

Abstract

A finite volume method based computational fluid dynamics model has been developed and applied for a cathode-supported planar solid oxide electrolysis cell (SOEC) operating in cross-flow configuration arrangement. The performance behavior, in terms of current density, temperature distribution and hydrogen production in an SOEC, has been investigated for different operating voltages and compared with a corresponding parallel-flow configuration. The predicted results show that higher current densities are obtained for higher operating voltages. The anodic current density is higher than the cathodic one. Yet, the parallel-flow configuration yields lower current density values although they remain in the same order of magnitude as those from the cross-flow arrangement. The simulation reveals various temperature profiles depending on the operating voltage emphasizing the three thermal operating modes of an SOEC, i.e., endothermic, thermo-neutral and exothermic. Per contra, the parallel-flow arrangement gives a temperature decrease along the flow direction although operating in exothermic mode. Higher hydrogen molar fractions at the outlet of the cathode channel were obtained at higher operating voltages due to the higher current densities generated and the exothermic operating mode. The parallel-flow arrangement yields lower hydrogen production due to the lower current densities revealed.

Suggested Citation

  • Navasa, Maria & Yuan, Jinliang & Sundén, Bengt, 2015. "Computational fluid dynamics approach for performance evaluation of a solid oxide electrolysis cell for hydrogen production," Applied Energy, Elsevier, vol. 137(C), pages 867-876.
  • Handle: RePEc:eee:appene:v:137:y:2015:i:c:p:867-876
    DOI: 10.1016/j.apenergy.2014.04.104
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626191400467X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2014.04.104?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhen Zhang & Chengzhi Guan & Leidong Xie & Jian-Qiang Wang, 2022. "Design and Analysis of a Novel Opposite Trapezoidal Flow Channel for Solid Oxide Electrolysis Cell Stack," Energies, MDPI, vol. 16(1), pages 1-11, December.
    2. Meng, Xiuxia & Liu, Yongna & Yang, Naitao & Tan, Xiaoyao & Liu, Jian & Diniz da Costa, João C. & Liu, Shaomin, 2017. "Highly compact and robust hollow fiber solid oxide cells for flexible power generation and gas production," Applied Energy, Elsevier, vol. 205(C), pages 741-748.
    3. Song, Chunfeng & Liu, Qingling & Ji, Na & Kansha, Yasuki & Tsutsumi, Atsushi, 2015. "Optimization of steam methane reforming coupled with pressure swing adsorption hydrogen production process by heat integration," Applied Energy, Elsevier, vol. 154(C), pages 392-401.
    4. Jiming Yuan & Zeming Li & Benfeng Yuan & Guoping Xiao & Tao Li & Jian-Qiang Wang, 2023. "Optimization of High-Temperature Electrolysis System for Hydrogen Production Considering High-Temperature Degradation," Energies, MDPI, vol. 16(6), pages 1-18, March.
    5. Sriram Srinivas & Shankar Raman Dhanushkodi & Ramesh Kumar Chidambaram & Dorota Skrzyniowska & Anna Korzen & Jan Taler, 2023. "Benchmarking Electrolytes for the Solid Oxide Electrolyzer Using a Finite Element Model," Energies, MDPI, vol. 16(18), pages 1-15, September.
    6. Xing, Xuetao & Lin, Jin & Song, Yonghua & Hu, Qiang & Zhou, You & Mu, Shujun, 2018. "Optimization of hydrogen yield of a high-temperature electrolysis system with coordinated temperature and feed factors at various loading conditions: A model-based study," Applied Energy, Elsevier, vol. 232(C), pages 368-385.
    7. Kang, Zhenye & Mo, Jingke & Yang, Gaoqiang & Li, Yifan & Talley, Derrick A. & Retterer, Scott T. & Cullen, David A. & Toops, Todd J. & Brady, Michael P. & Bender, Guido & Pivovar, Bryan S. & Green, Jo, 2017. "Thin film surface modifications of thin/tunable liquid/gas diffusion layers for high-efficiency proton exchange membrane electrolyzer cells," Applied Energy, Elsevier, vol. 206(C), pages 983-990.
    8. Youchan Kim & Kisung Lim & Hassan Salihi & Seongku Heo & Hyunchul Ju, 2023. "The Effects of Stack Configurations on the Thermal Management Capabilities of Solid Oxide Electrolysis Cells," Energies, MDPI, vol. 17(1), pages 1-20, December.
    9. Patil, Tarkeshwar C. & Duttagupta, Siddhartha P., 2016. "Micro-Solid Oxide Fuel Cell: A multi-fuel approach for portable applications," Applied Energy, Elsevier, vol. 168(C), pages 534-543.
    10. Choi, Bokkyu & Panthi, Dhruba & Nakoji, Masateru & Tsutsumi, Kaduo & Tsutsumi, Atsushi, 2017. "Design and performance evaluation of a novel 1kW-class hydrogen production/power generation system," Applied Energy, Elsevier, vol. 194(C), pages 296-303.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:137:y:2015:i:c:p:867-876. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.