Large eddy simulation of n-Dodecane spray combustion in a high pressure combustion vessel

Autoignition and stabilization of n-Dodecane spray combustion under diesel engine like conditions are investigated using large eddy simulation and detailed chemical kinetics. The Spray A cases of Engine Combustion Network (ECN) with ambient temperatures of 900K and 1000K are considered. Two-stage ignition behavior is predicted in the studied conditions. It is found that the first-stage ignition occurs on the fuel-lean mixture, whereas the second-stage ignition starts on the fuel-rich mixture. The first stage ignition in the fuel-lean mixture promotes the first and the second stage ignition in the fuel-rich mixture owing to rapid turbulent mixing. Two mechanisms, autoignition and flame propagation coupling with the low temperature ignition, are used to explain the lift-off position and stabilization of the combustion process. They compete with each other, and their relative importance depends on the ambient temperature. The ambient temperature is shown to affect the soot emission in the flame through its influences on the lift-off length and the reaction zone structure. Higher ambient temperature results in a shorter lift-off length, which gives rise to higher soot emission due to the lower air entrainment to the fuel-rich zone in front of the flame. In the lower temperature case, the flame is stabilized by an autoignition induced flame front where a considerable amount of fuel is oxidized to CO at the leading front of the flame. Consequently, it reduces the soot formation in the flame.