IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v111y2013icp257-266.html
   My bibliography  Save this article

Conversion of sewage sludge to clean solid fuel using hydrothermal carbonization: Hydrochar fuel characteristics and combustion behavior

Author

Listed:
  • He, Chao
  • Giannis, Apostolos
  • Wang, Jing-Yuan

Abstract

Conventional thermochemical treatment of sewage sludge (SS) is energy-intensive due to its high moisture content. To overcome this drawback, the hydrothermal carbonization (HTC) process was used to convert SS into clean solid fuel without prior drying. Different carbonization times were applied in order to produce hydrochars possessing better fuel properties. After the carbonization process, fuel characteristics and combustion behaviors of hydrochars were evaluated. Elemental analysis showed that 88% of carbon was recovered while 60% of nitrogen and sulfur was removed. Due to dehydration and decarboxylation reactions, hydrogen/carbon and oxygen/carbon atomic ratios reduced to 1.53 and 0.39, respectively. It was found that the fuel ratio increased to 0.18 by prolonging the carbonization process. Besides, longer carbonization time seemed to decrease oxygen containing functional groups while carbon aromaticity structure increased, thereby rendering hydrochars highly hydrophobic. The thermogravimetric analysis showed that the combustion decomposition was altered from a single stage for raw sludge to two stages for hydrochars. The combustion reaction was best fitted to the first order for both raw sludge and hydrochars. The combustion of hydrochars is expected to be easier and more stable than raw sludge because of lower activation energy and pre-exponential factor.

Suggested Citation

  • He, Chao & Giannis, Apostolos & Wang, Jing-Yuan, 2013. "Conversion of sewage sludge to clean solid fuel using hydrothermal carbonization: Hydrochar fuel characteristics and combustion behavior," Applied Energy, Elsevier, vol. 111(C), pages 257-266.
  • Handle: RePEc:eee:appene:v:111:y:2013:i:c:p:257-266
    DOI: 10.1016/j.apenergy.2013.04.084
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261913003887
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2013.04.084?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lu, Liang & Namioka, Tomoaki & Yoshikawa, Kunio, 2011. "Effects of hydrothermal treatment on characteristics and combustion behaviors of municipal solid wastes," Applied Energy, Elsevier, vol. 88(11), pages 3659-3664.
    2. Muthuraman, Marisamy & Namioka, Tomoaki & Yoshikawa, Kunio, 2010. "Characteristics of co-combustion and kinetic study on hydrothermally treated municipal solid waste with different rank coals: A thermogravimetric analysis," Applied Energy, Elsevier, vol. 87(1), pages 141-148, January.
    3. Heilmann, Steven M. & Jader, Lindsey R. & Harned, Laurie A. & Sadowsky, Michael J. & Schendel, Frederick J. & Lefebvre, Paul A. & von Keitz, Marc G. & Valentas, Kenneth J., 2011. "Hydrothermal carbonization of microalgae II. Fatty acid, char, and algal nutrient products," Applied Energy, Elsevier, vol. 88(10), pages 3286-3290.
    4. Wang, Chang’an & Zhang, Xiaoming & Liu, Yinhe & Che, Defu, 2012. "Pyrolysis and combustion characteristics of coals in oxyfuel combustion," Applied Energy, Elsevier, vol. 97(C), pages 264-273.
    5. Jin, Yuqi & Lu, Liang & Ma, Xiaojun & Liu, Hongmei & Chi, Yong & Yoshikawa, Kunio, 2013. "Effects of blending hydrothermally treated municipal solid waste with coal on co-combustion characteristics in a lab-scale fluidized bed reactor," Applied Energy, Elsevier, vol. 102(C), pages 563-570.
    6. Meng, Dawei & Jiang, Zili & Kunio, Yoshikawa & Mu, Hongyan, 2012. "The effect of operation parameters on the hydrothermal drying treatment," Renewable Energy, Elsevier, vol. 42(C), pages 90-94.
    7. Özçimen, Didem & Ersoy-Meriçboyu, Ayşegül, 2010. "Characterization of biochar and bio-oil samples obtained from carbonization of various biomass materials," Renewable Energy, Elsevier, vol. 35(6), pages 1319-1324.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shen, Yafei & Yu, Shili & Ge, Shun & Chen, Xingming & Ge, Xinlei & Chen, Mindong, 2017. "Hydrothermal carbonization of medical wastes and lignocellulosic biomass for solid fuel production from lab-scale to pilot-scale," Energy, Elsevier, vol. 118(C), pages 312-323.
    2. Zhuang, Xiuzheng & Liu, Jianguo & Zhang, Qi & Wang, Chenguang & Zhan, Hao & Ma, Longlong, 2022. "A review on the utilization of industrial biowaste via hydrothermal carbonization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    3. Zhao, Peitao & Shen, Yafei & Ge, Shifu & Chen, Zhenqian & Yoshikawa, Kunio, 2014. "Clean solid biofuel production from high moisture content waste biomass employing hydrothermal treatment," Applied Energy, Elsevier, vol. 131(C), pages 345-367.
    4. Zhao, Peitao & Chen, Hongfang & Ge, Shifu & Yoshikawa, Kunio, 2013. "Effect of the hydrothermal pretreatment for the reduction of NO emission from sewage sludge combustion," Applied Energy, Elsevier, vol. 111(C), pages 199-205.
    5. Peng, Nana & Liu, Zhengang & Liu, Tingting & Gai, Chao, 2016. "Emissions of polycyclic aromatic hydrocarbons (PAHs) during hydrothermally treated municipal solid waste combustion for energy generation," Applied Energy, Elsevier, vol. 184(C), pages 396-403.
    6. Dai, C. & Cai, X.H. & Cai, Y.P. & Huang, G.H., 2014. "A simulation-based fuzzy possibilistic programming model for coal blending management with consideration of human health risk under uncertainty," Applied Energy, Elsevier, vol. 133(C), pages 1-13.
    7. Jin, Yuqi & Lu, Liang & Ma, Xiaojun & Liu, Hongmei & Chi, Yong & Yoshikawa, Kunio, 2013. "Effects of blending hydrothermally treated municipal solid waste with coal on co-combustion characteristics in a lab-scale fluidized bed reactor," Applied Energy, Elsevier, vol. 102(C), pages 563-570.
    8. Ismail, Tamer M. & Yoshikawa, Kunio & Sherif, Hisham & Abd El-Salam, M., 2019. "Hydrothermal treatment of municipal solid waste into coal in a commercial Plant: Numerical assessment of process parameters," Applied Energy, Elsevier, vol. 250(C), pages 653-664.
    9. Baskoro Lokahita, & Muhammad Aziz, & Yoshikawa, Kunio & Takahashi, Fumitake, 2017. "Energy and resource recovery from Tetra Pak waste using hydrothermal treatment," Applied Energy, Elsevier, vol. 207(C), pages 107-113.
    10. Wang, Ze & Lin, Weigang & Song, Wenli, 2012. "Liquid product from hydrothermal treatment of cellulose by direct GC/MS analysis," Applied Energy, Elsevier, vol. 97(C), pages 56-60.
    11. Sahu, S.G. & Chakraborty, N. & Sarkar, P., 2014. "Coal–biomass co-combustion: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 575-586.
    12. Danso-Boateng, E. & Holdich, R.G. & Shama, G. & Wheatley, A.D. & Sohail, M. & Martin, S.J., 2013. "Kinetics of faecal biomass hydrothermal carbonisation for hydrochar production," Applied Energy, Elsevier, vol. 111(C), pages 351-357.
    13. Michael Kröger & Marco Klemm & Michael Nelles, 2018. "Hydrothermal Disintegration and Extraction of Different Microalgae Species," Energies, MDPI, vol. 11(2), pages 1-13, February.
    14. Pablo J. Arauzo & María Atienza-Martínez & Javier Ábrego & Maciej P. Olszewski & Zebin Cao & Andrea Kruse, 2020. "Combustion Characteristics of Hydrochar and Pyrochar Derived from Digested Sewage Sludge," Energies, MDPI, vol. 13(16), pages 1-15, August.
    15. Bu, Changsheng & Gómez-Barea, Alberto & Chen, Xiaoping & Leckner, Bo & Liu, Daoyin & Pallarès, David & Lu, Ping, 2016. "Effect of CO2 on oxy-fuel combustion of coal-char particles in a fluidized bed: Modeling and comparison with the conventional mode of combustion," Applied Energy, Elsevier, vol. 177(C), pages 247-259.
    16. Wang, Liping & Chang, Yuzhi & Li, Aimin, 2019. "Hydrothermal carbonization for energy-efficient processing of sewage sludge: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 423-440.
    17. Daniele Basso & Elsa Weiss-Hortala & Francesco Patuzzi & Marco Baratieri & Luca Fiori, 2018. "In Deep Analysis on the Behavior of Grape Marc Constituents during Hydrothermal Carbonization," Energies, MDPI, vol. 11(6), pages 1-19, May.
    18. Lee, Jongkeun & Lee, Kwanyong & Sohn, Donghwan & Kim, Young Mo & Park, Ki Young, 2018. "Hydrothermal carbonization of lipid extracted algae for hydrochar production and feasibility of using hydrochar as a solid fuel," Energy, Elsevier, vol. 153(C), pages 913-920.
    19. Kartal, Furkan & Dalbudak, Yağmur & Özveren, Uğur, 2023. "Prediction of thermal degradation of biopolymers in biomass under pyrolysis atmosphere by means of machine learning," Renewable Energy, Elsevier, vol. 204(C), pages 774-787.
    20. Aragón-Briceño, C.I. & Pozarlik, A.K. & Bramer, E.A. & Niedzwiecki, Lukasz & Pawlak-Kruczek, H. & Brem, G., 2021. "Hydrothermal carbonization of wet biomass from nitrogen and phosphorus approach: A review," Renewable Energy, Elsevier, vol. 171(C), pages 401-415.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:111:y:2013:i:c:p:257-266. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.