IDEAS home Printed from https://ideas.repec.org/a/eee/agiwat/v243y2021ics037837742030617x.html
   My bibliography  Save this article

Evaluation of a Sprayable Biodegradable Polymer Membrane (SBPM) Technology for soil water conservation in tomato and watermelon production systems

Author

Listed:
  • Braunack, Michael V.
  • Filipović, Vilim
  • Adhikari, Raju
  • Freischmidt, George
  • Johnston, Priscilla
  • Casey, Phil S.
  • Wang, Yusong
  • Šimůnek, Jiří
  • Filipović, Lana
  • Bristow, Keith L.

Abstract

Reducing soil evaporation, especially in temperate climate zones, increases crop production. Plastic mulch films (PMFs) are very efficient in conserving soil water conservation; however, plastic pollution is raising environmental and human health concerns. Therefore, a newly developed Sprayable Biodegradable Polymer Membrane (SBPM) Technology was tested for its ability to conserve soil water, suppress weeds, modify soil temperature, and improve crop yields. Two-year field experiments were performed in tomato and watermelon cropping systems, where SBPM was compared to no mulch and PMF controls. SBPM loadings were 3.0, 1.0, 0.5, and 0.25 kg m−2, with fumigation (F) and without fumigation (NF) in tomato, and 1.5, 1.0, 0.5, and 0.25 kg m−2 in watermelon. In tomato, the soil volumetric water content (VWC) in the topsoil was significantly higher for all treatments compared to the control, in the following order: 1 kg m−2 F > 0.5 kg m−2 NF > 1 kg m−2 NF > 0.5 kg m−2 F > Control in 2016/17; and 3 kg m-2 NF > Control > 0.5 kg m−2 F > 3 kg m−2 F > 0.5 kg m−2 NF in 2018. With watermelon in 2017, VWC was lower in the topsoil of the SBPM treatments than with PMF, but higher during the 2018 trial when no crop was grown. The amount of conserved soil water appeared to be determined by the physical integrity (unevenness/holes/tears) of the SBPM and PMFs. Soil salinity increase/decrease was associated with the volume of infiltrating water in the different treatments. Soil temperature increased significantly under the highest SBPM loading of 3 kg m−2 NF, using a 55 cm width of polymer coverage. The yield responses across treatments were not significant. Field experiments proved the effectiveness of the SBPM technology, but also highlighted some limitations of it when compared with conventional PMFs. The SBPM technology needs ongoing refinement to improve its sprayability, durability, biodegradability, and cost-effectiveness.

Suggested Citation

  • Braunack, Michael V. & Filipović, Vilim & Adhikari, Raju & Freischmidt, George & Johnston, Priscilla & Casey, Phil S. & Wang, Yusong & Šimůnek, Jiří & Filipović, Lana & Bristow, Keith L., 2021. "Evaluation of a Sprayable Biodegradable Polymer Membrane (SBPM) Technology for soil water conservation in tomato and watermelon production systems," Agricultural Water Management, Elsevier, vol. 243(C).
    • Handle: RePEc:eee:agiwat:v:243:y:2021:i:c:s037837742030617x
    DOI: 10.1016/j.agwat.2020.106446
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S037837742030617X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.agwat.2020.106446?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Braunack, Michael V. & Zaja, Adriana & Tam, Kang & Filipović, Lana & Filipović, Vilim & Wang, Yusong & Bristow, Keith L., 2020. "A Sprayable Biodegradable Polymer Membrane (SBPM) technology: Effect of band width and application rate on water conservation and seedling emergence," Agricultural Water Management, Elsevier, vol. 230(C).
    2. Adhikari, Raju & Bristow, Keith L. & Casey, Philip S. & Freischmidt, George & Hornbuckle, John W. & Adhikari, Benu, 2016. "Preformed and sprayable polymeric mulch film to improve agricultural water use efficiency," Agricultural Water Management, Elsevier, vol. 169(C), pages 1-13.
    3. Adhikari, Raju & Mingtarja, Hendre & Freischmidt, George & Bristow, Keith L. & Casey, Philip S. & Johnston, Priscilla & Sangwan, Parveen, 2019. "Effect of viscosity modifiers on soil wicking and physico-mechanical properties of a polyurethane based sprayable biodegradable polymer membrane," Agricultural Water Management, Elsevier, vol. 222(C), pages 346-353.
    4. Qi, Zhijuan & Feng, Hao & Zhao, Ying & Zhang, Tibin & Yang, Aizheng & Zhang, Zhongxue, 2018. "Spatial distribution and simulation of soil moisture and salinity under mulched drip irrigation combined with tillage in an arid saline irrigation district, northwest China," Agricultural Water Management, Elsevier, vol. 201(C), pages 219-231.
    5. Filipović, Vilim & Romić, Davor & Romić, Marija & Borošić, Josip & Filipović, Lana & Mallmann, Fábio Joel Kochem & Robinson, David A., 2016. "Plastic mulch and nitrogen fertigation in growing vegetables modify soil temperature, water and nitrate dynamics: Experimental results and a modeling study," Agricultural Water Management, Elsevier, vol. 176(C), pages 100-110.
    6. Sun, Tao & Li, Geng & Ning, Tang-Yuan & Zhang, Zhi-Meng & Mi, Qing-Hua & Lal, Rattan, 2018. "Suitability of mulching with biodegradable film to moderate soil temperature and moisture and to increase photosynthesis and yield in peanut," Agricultural Water Management, Elsevier, vol. 208(C), pages 214-223.
    7. Chen, Ning & Li, Xianyue & Šimůnek, Jirí & Shi, Haibin & Ding, Zongjiang & Peng, Zunyuan, 2019. "Evaluating the effects of biodegradable film mulching on soil water dynamics in a drip-irrigated field," Agricultural Water Management, Elsevier, vol. 226(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Ning & Li, Xianyue & Shi, Haibin & Yan, Jianwen & Zhang, Yuehong & Hu, Qi, 2023. "Evaluating the effects of plastic film mulching duration on soil nitrogen dynamic and comprehensive benefit for corn (Zea mays L.) field," Agricultural Water Management, Elsevier, vol. 286(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zong, Rui & Wang, Zhenhua & Zhang, Jinzhu & Li, Wenhao, 2021. "The response of photosynthetic capacity and yield of cotton to various mulching practices under drip irrigation in Northwest China," Agricultural Water Management, Elsevier, vol. 249(C).
    2. Zhang, Peng & Wei, Ting & Han, Qingfang & Ren, Xiaolong & Jia, Zhikuan, 2020. "Effects of different film mulching methods on soil water productivity and maize yield in a semiarid area of China," Agricultural Water Management, Elsevier, vol. 241(C).
    3. Liu, Meihan & Paredes, Paula & Shi, Haibin & Ramos, Tiago B. & Dou, Xu & Dai, Liping & Pereira, Luis S., 2022. "Impacts of a shallow saline water table on maize evapotranspiration and groundwater contribution using static water table lysimeters and the dual Kc water balance model SIMDualKc," Agricultural Water Management, Elsevier, vol. 273(C).
    4. Braunack, Michael V. & Zaja, Adriana & Tam, Kang & Filipović, Lana & Filipović, Vilim & Wang, Yusong & Bristow, Keith L., 2020. "A Sprayable Biodegradable Polymer Membrane (SBPM) technology: Effect of band width and application rate on water conservation and seedling emergence," Agricultural Water Management, Elsevier, vol. 230(C).
    5. Yin, Tao & Yao, Zhipeng & Yan, Changrong & Liu, Qi & Ding, Xiaodong & He, Wenqing, 2023. "Maize yield reduction is more strongly related to soil moisture fluctuation than soil temperature change under biodegradable film vs plastic film mulching in a semi-arid region of northern China," Agricultural Water Management, Elsevier, vol. 287(C).
    6. Yin, Minhua & Li, Yuannong & Fang, Heng & Chen, Pengpeng, 2019. "Biodegradable mulching film with an optimum degradation rate improves soil environment and enhances maize growth," Agricultural Water Management, Elsevier, vol. 216(C), pages 127-137.
    7. Cristina Abbate & Aurelio Scavo & Gaetano Roberto Pesce & Stefania Fontanazza & Alessia Restuccia & Giovanni Mauromicale, 2023. "Soil Bioplastic Mulches for Agroecosystem Sustainability: A Comprehensive Review," Agriculture, MDPI, vol. 13(1), pages 1-30, January.
    8. Xia Gao & Chenxing Fu & Mingxiao Li & Xuejiao Qi & Xuan Jia, 2022. "Effects of Biodegradation of Corn-Starch–Sodium-Alginate-Based Liquid Mulch Film on Soil Microbial Functions," IJERPH, MDPI, vol. 19(14), pages 1-14, July.
    9. Donghui He & Keith Bristow & Vilim Filipović & Jialong Lv & Hailong He, 2020. "Microplastics in Terrestrial Ecosystems: A Scientometric Analysis," Sustainability, MDPI, vol. 12(20), pages 1-15, October.
    10. Zhanli Ma & Jian Liu & Yue Wen & Wenhao Li & Yan Zhu & Libing Song & Yunguang Li & Yonghui Liang & Zhenhua Wang, 2024. "Effects of Different Film Types on Cotton Growth and Yield under Drip Irrigation," Sustainability, MDPI, vol. 16(10), pages 1-14, May.
    11. Leng, Xu & Li, Xianyue & Chen, Ning & Zhang, Jinjun & Guo, Yu & Ding, Zongjiang, 2021. "Evaluating the effects of biodegradable film mulching and topdressing nitrogen on nitrogen dynamic and utilization in the arid cornfield," Agricultural Water Management, Elsevier, vol. 258(C).
    12. Zhang, Wang & Tian, Yong & Sun, Zan & Zheng, Chunmiao, 2021. "How does plastic film mulching affect crop water productivity in an arid river basin?," Agricultural Water Management, Elsevier, vol. 258(C).
    13. Fang, Heng & Li, Yuannong & Gu, Xiaobo & Yu, Meng & Chen, Pengpeng & Li, Yupeng & Liu, Fulai, 2022. "Optimizing the impact of film mulching pattern and nitrogen application rate on maize production, gaseous N emissions, and utilization of water and nitrogen in northwest China," Agricultural Water Management, Elsevier, vol. 261(C).
    14. Li, Yunfeng & Yu, Qihua & Ning, Huifeng & Gao, Yang & Sun, Jingsheng, 2023. "Simulation of soil water, heat, and salt adsorptive transport under film mulched drip irrigation in an arid saline-alkali area using HYDRUS-2D," Agricultural Water Management, Elsevier, vol. 290(C).
    15. Zhang, You-Liang & Feng, Shao-Yuan & Wang, Feng-Xin & Binley, Andrew, 2018. "Simulation of soil water flow and heat transport in drip irrigated potato field with raised beds and full plastic-film mulch in a semiarid area," Agricultural Water Management, Elsevier, vol. 209(C), pages 178-187.
    16. Jovanovic, N. & Pereira, L.S. & Paredes, P. & Pôças, I. & Cantore, V. & Todorovic, M., 2020. "A review of strategies, methods and technologies to reduce non-beneficial consumptive water use on farms considering the FAO56 methods," Agricultural Water Management, Elsevier, vol. 239(C).
    17. Liu, Yi & Zeng, Wenzhi & Ao, Chang & Lei, Guoqing & Wu, Jingwei & Huang, Jiesheng & Gaiser, Thomas & Srivastava, Amit Kumar, 2022. "Optimization of winter irrigation management for salinized farmland using a coupled model of soil water flow and crop growth," Agricultural Water Management, Elsevier, vol. 270(C).
    18. Yang Xiang & Jianming Kang & Chunyan Zhang & Qiangji Peng & Ningning Zhang & Xiaoyu Wang, 2022. "Analysis and Optimization Test of the Peanut Seeding Process with an Air-Suction Roller Dibbler," Agriculture, MDPI, vol. 12(11), pages 1-18, November.
    19. Zhang, Tibin & Zou, Yufeng & Kisekka, Isaya & Biswas, Asim & Cai, Huanjie, 2021. "Comparison of different irrigation methods to synergistically improve maize’s yield, water productivity and economic benefits in an arid irrigation area," Agricultural Water Management, Elsevier, vol. 243(C).
    20. Zhao, Ying & Zhai, Xiafei & Wang, Zhaohui & Li, Huijie & Jiang, Rui & Lee Hill, Robert & Si, Bing & Hao, Feng, 2018. "Simulation of soil water and heat flow in ridge cultivation with plastic film mulching system on the Chinese Loess Plateau," Agricultural Water Management, Elsevier, vol. 202(C), pages 99-112.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:agiwat:v:243:y:2021:i:c:s037837742030617x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/agwat .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.