IDEAS home Printed from https://ideas.repec.org/a/eee/agiwat/v228y2020ics0378377419303981.html
   My bibliography  Save this article

Selection of flow rate and irrigation duration for high performance bay irrigation

Author

Listed:
  • Smith, RJ
  • Uddin, MJ

Abstract

The maximum efficiency attainable by surface irrigation in any particular situation is determined largely by the soil infiltration characteristic and the flow rate onto the field. Performance evaluations have suggested that higher flow rates than those traditionally recommended can lead to increases of about 20% in the application efficiency of bay irrigation across the dairy regions of southern Australia. However, substantially reduced irrigation durations are required to realise these efficiency gains and greater precision is required in the selection and management of these shorter durations.

Suggested Citation

  • Smith, RJ & Uddin, MJ, 2020. "Selection of flow rate and irrigation duration for high performance bay irrigation," Agricultural Water Management, Elsevier, vol. 228(C).
  • Handle: RePEc:eee:agiwat:v:228:y:2020:i:c:s0378377419303981
    DOI: 10.1016/j.agwat.2019.105850
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378377419303981
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.agwat.2019.105850?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hume, Iain H., 1993. "Determination of infiltration characteristics by volume balance for border check irrigation," Agricultural Water Management, Elsevier, vol. 23(1), pages 23-39, March.
    2. Smith, R.J. & Uddin, M.J. & Gillies, M.H., 2018. "Estimating irrigation duration for high performance furrow irrigation on cracking clay soils," Agricultural Water Management, Elsevier, vol. 206(C), pages 78-85.
    3. Smith, R.J. & Raine, S.R. & Minkevich, J., 2005. "Irrigation application efficiency and deep drainage potential under surface irrigated cotton," Agricultural Water Management, Elsevier, vol. 71(2), pages 117-130, February.
    4. Maheshwari, B. L. & Turner, A. K. & McMahon, T. A. & Campbell, B. J., 1988. "An optimization technique for estimating infiltration characteristics in border irrigation," Agricultural Water Management, Elsevier, vol. 13(1), pages 13-24, April.
    5. Feyen, Jan & Zerihun, Dawit, 1999. "Assessment of the performance of border and furrow irrigation systems and the relationship between performance indicators and system variables," Agricultural Water Management, Elsevier, vol. 40(2-3), pages 353-362, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Malum J. Flayin & Donald Adgidzi, 2023. "Design of irrigation scheme for an improved fodder crop production as food for ranch cattle," Technology audit and production reserves, PC TECHNOLOGY CENTER, vol. 6(3(74)), pages 43-52, December.
    2. Devkota, Krishna Prasad & Yadav, Sudhir & Humphreys, E. & Kumar, Akhilesh & Kumar, Pankaj & Kumar, Virender & Malik, R.K. & Srivastava, Amit K., 2021. "Land gradient and configuration effects on yield, irrigation amount and irrigation water productivity in rice-wheat and maize-wheat cropping systems in Eastern India," Agricultural Water Management, Elsevier, vol. 255(C).
    3. Mazarei, Reza & Soltani Mohammadi, Amir & Ebrahimian, Hamed & Naseri, Abd Ali, 2021. "Temporal variability of infiltration and roughness coefficients and furrow irrigation performance under different inflow rates," Agricultural Water Management, Elsevier, vol. 245(C).
    4. Jovanovic, N. & Pereira, L.S. & Paredes, P. & Pôças, I. & Cantore, V. & Todorovic, M., 2020. "A review of strategies, methods and technologies to reduce non-beneficial consumptive water use on farms considering the FAO56 methods," Agricultural Water Management, Elsevier, vol. 239(C).
    5. Aminpour, Younes & Dehghan, Darya & Playán, Enrique & Maroufpoor, Eisa, 2023. "Estimation of wind drift and evaporation losses of sprinkler irrigation systems using dimensional analysis," Agricultural Water Management, Elsevier, vol. 289(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mehri, Akbar & Mohammadi, Amir Soltani & Ebrahimian, Hamed & Boroomandnasab, Saeid, 2023. "Evaluation and optimization of surge and alternate furrow irrigation performance in maize fields using the WinSRFR software," Agricultural Water Management, Elsevier, vol. 276(C).
    2. Foroud, N. & George, E. St. & Entz, T., 1996. "Determination of infiltration rate from border irrigation advance and recession trajectories," Agricultural Water Management, Elsevier, vol. 30(2), pages 133-142, April.
    3. Smith, R.J. & Uddin, M.J. & Gillies, M.H., 2018. "Estimating irrigation duration for high performance furrow irrigation on cracking clay soils," Agricultural Water Management, Elsevier, vol. 206(C), pages 78-85.
    4. Mohamed Khaled Salahou & Xiyun Jiao & Haishen Lü & Weihua Guo, 2020. "An improved approach to estimating the infiltration characteristics in surface irrigation systems," PLOS ONE, Public Library of Science, vol. 15(6), pages 1-16, June.
    5. Xu, Jiatun & Cai, Huanjie & Saddique, Qaisar & Wang, Xiaoyun & Li, Liang & Ma, Chenguang & Lu, Yajun, 2019. "Evaluation and optimization of border irrigation in different irrigation seasons based on temporal variation of infiltration and roughness," Agricultural Water Management, Elsevier, vol. 214(C), pages 64-77.
    6. Costabile, Pierfranco & Costanzo, Carmelina & Gangi, Fabiola & De Gaetani, Carlo Iapige & Rossi, Lorenzo & Gandolfi, Claudio & Masseroni, Daniele, 2023. "High-resolution 2D modelling for simulating and improving the management of border irrigation," Agricultural Water Management, Elsevier, vol. 275(C).
    7. Mazarei, Reza & Soltani Mohammadi, Amir & Ebrahimian, Hamed & Naseri, Abd Ali, 2021. "Temporal variability of infiltration and roughness coefficients and furrow irrigation performance under different inflow rates," Agricultural Water Management, Elsevier, vol. 245(C).
    8. Morris, Michael R. & Hussain, Amjed & Gillies, Malcolm H. & O’Halloran, Nicholas J., 2015. "Inflow rate and border irrigation performance," Agricultural Water Management, Elsevier, vol. 155(C), pages 76-86.
    9. Pazouki, Ehsan, 2021. "A practical surface irrigation design based on fuzzy logic and meta-heuristic algorithms," Agricultural Water Management, Elsevier, vol. 256(C).
    10. Nie, Wei-Bo & Dong, Shu-Xin & Li, Yi-Bo & Ma, Xiao-Yi, 2021. "Optimization of the border size on the irrigation district scale – Example of the Hetao irrigation district," Agricultural Water Management, Elsevier, vol. 248(C).
    11. George Frisvold & Charles Sanchez & Noel Gollehon & Sharon B. Megdal & Paul Brown, 2018. "Evaluating Gravity-Flow Irrigation with Lessons from Yuma, Arizona, USA," Sustainability, MDPI, vol. 10(5), pages 1-27, May.
    12. Nie, Wei-Bo & Li, Yi-Bo & Zhang, Fan & Ma, Xiao-Yi, 2019. "Optimal discharge for closed-end border irrigation under soil infiltration variability," Agricultural Water Management, Elsevier, vol. 221(C), pages 58-65.
    13. Devkota, Krishna Prasad & Yadav, Sudhir & Humphreys, E. & Kumar, Akhilesh & Kumar, Pankaj & Kumar, Virender & Malik, R.K. & Srivastava, Amit K., 2021. "Land gradient and configuration effects on yield, irrigation amount and irrigation water productivity in rice-wheat and maize-wheat cropping systems in Eastern India," Agricultural Water Management, Elsevier, vol. 255(C).
    14. Pazouki, Ehsan, 2023. "A smart surface irrigation design based on the topographical and geometrical shape characteristics of the land," Agricultural Water Management, Elsevier, vol. 275(C).
    15. Dholakia, Mrugen & Misra, Rajeev & Zaman, M. S., 1998. "Simulation of border irrigation system using explicit MacCormack finite difference method," Agricultural Water Management, Elsevier, vol. 36(3), pages 181-200, April.
    16. Petheram, Cuan & Bristow, Keith L. & Nelson, Paul N., 2008. "Understanding and managing groundwater and salinity in a tropical conjunctive water use irrigation district," Agricultural Water Management, Elsevier, vol. 95(10), pages 1167-1179, October.
    17. Yan Zhu & Huanjie Cai & Libing Song & Xiaowen Wang & Zihui Shang & Yanan Sun, 2020. "Aerated Irrigation of Different Irrigation Levels and Subsurface Dripper Depths Affects Fruit Yield, Quality and Water Use Efficiency of Greenhouse Tomato," Sustainability, MDPI, vol. 12(7), pages 1-19, March.
    18. Esfandiari, M. & Maheshwari, B. L., 1997. "Application of the optimization method for estimating infiltration characteristics in furrow irrigation and its comparison with other methods," Agricultural Water Management, Elsevier, vol. 34(2), pages 169-185, August.
    19. Richards, Q.D. & Bange, M.P. & Johnston, S.B., 2008. "HydroLOGIC: An irrigation management system for Australian cotton," Agricultural Systems, Elsevier, vol. 98(1), pages 40-49, July.
    20. Darouich, Hanaa & Gonçalves, José M. & Muga, André & Pereira, Luis S., 2012. "Water saving vs. farm economics in cotton surface irrigation: An application of multicriteria analysis," Agricultural Water Management, Elsevier, vol. 115(C), pages 223-231.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:agiwat:v:228:y:2020:i:c:s0378377419303981. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/agwat .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.