IDEAS home Printed from https://ideas.repec.org/p/ind/cdswpp/334.html
   My bibliography  Save this paper

Economic reforms and industrial performance: An analysis of capacity utilisation in Indian manufacturing

Author

Listed:
  • E. Abdul Azeez

    (Centre for Development Studies)

Abstract

This paper examines the performance of Indian manufacturing sector in terms of economic capacity utilization (CU), over 1974-1998. An attempt is also made to understand the impact of policy changes, inter alia, on the observed movements of CU. The economic CU, defined as the realization of output at which the short run average total cost is minimized, is estimated using a translog cost function. We observe cyclical movements in CU over the period. Three distinct phases have been identified with regard to the movements in CU. While phase one (1974-1984) is characterized by relatively wide fluctuations, phase two (1985-1990) witnessed a roughly stable level of utilization. In the third phase (1991-1998), a variant of the fluctuations witnessed in the first phase is seen to have resurfaced. Interestingly, there has not been any significant correspondence between the observed phases of CU with the corresponding policy environment. While supply and demand side factors are significant in determining CU in Indian manufacturing, the impact of economic reforms per se is not remarkable.

Suggested Citation

  • E. Abdul Azeez, 2002. "Economic reforms and industrial performance: An analysis of capacity utilisation in Indian manufacturing," Centre for Development Studies, Trivendrum Working Papers 334, Centre for Development Studies, Trivendrum, India.
    • Handle: RePEc:ind:cdswpp:334
    as

    Download full text from publisher

    File URL: http://www.cds.edu/wp-content/uploads/2012/10/wp334.pdf
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ernesto Hernández-Catá, 1997. "Liberalization and the Behavior of Output during the Transition from Plan to Market," IMF Staff Papers, Palgrave Macmillan, vol. 44(4), pages 405-429, December.
    2. Jacques Drèze, 2001. "On the Macroeconomics of Uncertainty and Incomplete Markets," International Economic Association Series, in: Jacques Drèze (ed.), Advances in Macroeconomic Theory, chapter 3, pages 30-55, Palgrave Macmillan.
    3. Hulten, Charles R., 1986. "Productivity change, capacity utilization, and the sources of efficiency growth," Journal of Econometrics, Elsevier, vol. 33(1-2), pages 31-50.
    4. Lieberman, Marvin B, 1987. "Excess Capacity as a Barrier to Entry: An Empirical Appraisal," Journal of Industrial Economics, Wiley Blackwell, vol. 35(4), pages 607-627, June.
    5. Dixit, Avinash, 1980. "The Role of Investment in Entry-Deterrence," Economic Journal, Royal Economic Society, vol. 90(357), pages 95-106, March.
    6. Winston, Gordon C, 1974. "The Theory of Capital Utilization and Idleness," Journal of Economic Literature, American Economic Association, vol. 12(4), pages 1301-1320, December.
    7. Berndt, Ernst R. & Hesse, Dieter M., 1986. "Measuring and assessing capacity utilization in the manufacturing sectors of nine oecd countries," European Economic Review, Elsevier, vol. 30(5), pages 961-989, October.
    8. Berndt, Ernst R & Morrison, Catherine J, 1981. "Capacity Utilization Measures: Underlying Economic Theory and an Alternative Approach," American Economic Review, American Economic Association, vol. 71(2), pages 48-52, May.
    9. Nelson, Randy A, 1989. "On the Measurement of Capacity Utilization," Journal of Industrial Economics, Wiley Blackwell, vol. 37(3), pages 273-286, March.
    10. Ernesto Hernández-Catá, 1997. "Liberalization and the Behavior of Output During the Transition from Plan to Market," Annual Proceedings, The Association for the Study of the Cuban Economy, vol. 7.
    11. Berndt, Ernst R. & Fuss, Melvyn A., 1986. "Productivity measurement with adjustments for variations in capacity utilization and other forms of temporary equilibrium," Journal of Econometrics, Elsevier, vol. 33(1-2), pages 7-29.
    12. A. Michael Spence, 1977. "Entry, Capacity, Investment and Oligopolistic Pricing," Bell Journal of Economics, The RAND Corporation, vol. 8(2), pages 534-544, Autumn.
    13. Jagdish N. Bhagwati & T. N. Srinivasan, 1975. "Foreign Trade Regimes and Economic Development: India," NBER Books, National Bureau of Economic Research, Inc, number bhag75-1.
    14. Mr. Ernesto Hernández-Catá, 1997. "Liberalization and the Behavior of Output During the Transition From Plan to Market," IMF Working Papers 1997/053, International Monetary Fund.
    15. J. M. Cassels, 1937. "Excess Capacity and Monopolistic Competition," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 51(3), pages 426-443.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Richardson Kojo Edeme & Nelson C. Nkalu & Chisom Emecheta & Sam Ugwu, 2017. "Trade Policies, Exchange Rate and Developing Country's Real Sector Export Performance," International Journal of Economics and Financial Issues, Econjournals, vol. 7(2), pages 601-607.
    2. Mazumdar, Surajit, 2008. "Investment and growth in India under liberalization: Asymmetries and Instabilities," MPRA Paper 19629, University Library of Munich, Germany.
    3. N. Vijayamohanan Pillai, 2004. "CES function, generalised mean and human poverty index: Exploring some links," Centre for Development Studies, Trivendrum Working Papers 360, Centre for Development Studies, Trivendrum, India.
    4. Sudipto Sarkar, 2009. "A real-option rationale for investing in excess capacity," Managerial and Decision Economics, John Wiley & Sons, Ltd., vol. 30(2), pages 119-133.
    5. Jafar Ebadi & Saeed Mousavi Madani, 2006. "The Economies of Scale in Iran Manufacturing Establishments," Iranian Economic Review (IER), Faculty of Economics,University of Tehran.Tehran,Iran, vol. 11(1), pages 143-170, winter.
    6. Erumban, Abdul A., 2007. "Productivity and Unit Labor Cost in Indian Manufacturing: A Comparative Perspective," GGDC Research Memorandum 200796, Groningen Growth and Development Centre, University of Groningen.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dale Squires & Kathleen Segerson, 2022. "Capacity and Capacity Utilization in Production Economics," Springer Books, in: Subhash C. Ray & Robert G. Chambers & Subal C. Kumbhakar (ed.), Handbook of Production Economics, chapter 24, pages 1001-1037, Springer.
    2. H. Kim, 1999. "Economic Capacity Utilization and its Determinants: Theory and Evidence," Review of Industrial Organization, Springer;The Industrial Organization Society, vol. 15(4), pages 321-339, December.
    3. Mohieddine Rahmouni, 2021. "Determinants of capacity utilisation by firms in developing countries: evidence from Tunisia," International Journal of Technological Learning, Innovation and Development, Inderscience Enterprises Ltd, vol. 13(3), pages 212-245.
    4. Sarbapriya, Ray & Mihir, Kumar Pal, 2011. "An Application of Economic Capacity Utilization to the Measurement of Total Factor Productivity Growth: Empirical Evidence from Indian Fertilizer Industry," Journal for Economic Forecasting, Institute for Economic Forecasting, vol. 0(1), pages 125-142, March.
    5. Sahoo, Biresh K. & Tone, Kaoru, 2009. "Decomposing capacity utilization in data envelopment analysis: An application to banks in India," European Journal of Operational Research, Elsevier, vol. 195(2), pages 575-594, June.
    6. James Kirkley & Catherine Morrison Paul & Dale Squires, 2002. "Capacity and Capacity Utilization in Common-pool Resource Industries," Environmental & Resource Economics, Springer;European Association of Environmental and Resource Economists, vol. 22(1), pages 71-97, June.
    7. Arnab Deb, 2013. "Economic Reforms, Capacity Utilization, and Productivity Growth in Indian Manufacturing," Alumni working papers 2013-05, University of Connecticut, Department of Economics.
    8. Prior, Diego, 2003. "Long- and short-run non-parametric cost frontier efficiency: An application to Spanish savings banks," Journal of Banking & Finance, Elsevier, vol. 27(4), pages 655-671, April.
    9. Bruno De Borger & Kristiaan Kerstens & Diego Prior & Ignace Van de Woestyne, 2013. "Static efficiency decompositions and capacity utilization: integrating economic and technical capacity notions," Applied Economics, Taylor & Francis Journals, vol. 45(24), pages 3529-3529, August.
    10. Savagar, Anthony & Dixon, Huw, 2020. "Firm entry, excess capacity and endogenous productivity," European Economic Review, Elsevier, vol. 121(C).
    11. Kaustuva Barik, 2005. "Capacity Utilization in Indian Paper Industry," Microeconomics 0503001, University Library of Munich, Germany.
    12. Sarba Priya Ray, 2011. "Economic Efficiency in Indian Rubber Industry," Contemporary Economics, University of Economics and Human Sciences in Warsaw., vol. 5(4), December.
    13. Arnab K. Deb, 2014. "Economic Reforms, Capacity Utilization and Productivity Growth in Indian Manufacturing," Global Business Review, International Management Institute, vol. 15(4), pages 719-746, December.
    14. Ma, Hongqi & Mei, Xinxiang & Tian, Yuan, 2020. "The impacts and potential mechanisms of credit support with regard to overcapacity: Based on theoretical and empirical analyses of steel enterprises," Resources Policy, Elsevier, vol. 68(C).
    15. Berndt, Ernst R. & Fuss, Melvyn A., 1989. "Economic capacity utilization and productivity measurement for multiproduct firms with multiple quasi-fixed inputs," Working papers 3001-89., Massachusetts Institute of Technology (MIT), Sloan School of Management.
    16. Ernst R. Berndt & Melvyn A. Fuss, 1989. "Economic Capacity Utilization and Productivity Measurement for Multi-product firms with multiple quasi-fixed inputs," NBER Working Papers 2932, National Bureau of Economic Research, Inc.
    17. Mr. Sanjeev Gupta & Mr. Alejandro Simone & Mr. Alex Segura-Ubiergo, 2006. "New Evidence on Fiscal Adjustment and Growth in Transition Economies," IMF Working Papers 2006/244, International Monetary Fund.
    18. Lalit Manral, 2015. "The demand-side dynamics of entrant heterogeneity," Journal of Evolutionary Economics, Springer, vol. 25(2), pages 401-445, April.
    19. Wanki Moon & Wojciech J. Florkowski & Larry R. Beuchat & Anna V. A. Resurreccion & Manjeet S. Chinnan & Pavlina Paraskova & Jordan Jordanov, 1999. "Effects of product attributes and consumer characteristics on attitude and behavior: The case of peanuts in a transition economy," Agribusiness, John Wiley & Sons, Ltd., vol. 15(3), pages 411-425.
    20. Gaitan, Beatriz & Pavel, Ferdinand, 2000. "Is "Getting The Prices Right" Always Right? How Trade Liberalization Can Fail," Bulletins 12970, University of Minnesota, Economic Development Center.

    More about this item

    Keywords

    India; Manufacturing; Capacity Utilization; Economic reforms;
    All these keywords.

    JEL classification:

    • D24 - Microeconomics - - Production and Organizations - - - Production; Cost; Capital; Capital, Total Factor, and Multifactor Productivity; Capacity
    • L5 - Industrial Organization - - Regulation and Industrial Policy
    • L60 - Industrial Organization - - Industry Studies: Manufacturing - - - General
    • O47 - Economic Development, Innovation, Technological Change, and Growth - - Economic Growth and Aggregate Productivity - - - Empirical Studies of Economic Growth; Aggregate Productivity; Cross-Country Output Convergence

    NEP fields

    This paper has been announced in the following NEP Reports:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:ind:cdswpp:334. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Shamprasad M. Pujar (email available below). General contact details of provider: https://edirc.repec.org/data/cdsacin.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.