IDEAS home Printed from https://ideas.repec.org/a/taf/tprsxx/v55y2017i12p3497-3509.html
   My bibliography  Save this article

Alternative production strategies based on the comparison of additive and traditional manufacturing technologies

Author

Listed:
  • Charisios Achillas
  • Dimitrios Tzetzis
  • Maria Olga Raimondo

Abstract

Additive manufacturing technology has been evolving for several years. New material options, better processing speeds and greater autonomy are some of the characteristics of this technology that are still under research. However, in its current state, many commercially available 3D printers are competing with traditional manufacturing techniques in the fabrication of end-use products. In this paper, different additive manufacturing technologies are compared with injection moulding in a real-world case study. The comparison is conducted in terms of lead time and total production cost. From the case under study, it becomes obvious that none of the additive manufacturing technologies examined is yet able to practically replace injection moulding for medium- and high production volumes. However, when considering low-volume production, both rapid tooling and additive manufacturing may offer an alternative that could result into shorter lead times and decreased total production costs. In addition, the introduction of Additive Manufacturing in a producer’s production portfolio can increase flexibility, reduce warehousing costs and assist the company towards the adoption of a mass customisation business strategy.

Suggested Citation

  • Charisios Achillas & Dimitrios Tzetzis & Maria Olga Raimondo, 2017. "Alternative production strategies based on the comparison of additive and traditional manufacturing technologies," International Journal of Production Research, Taylor & Francis Journals, vol. 55(12), pages 3497-3509, June.
    • Handle: RePEc:taf:tprsxx:v:55:y:2017:i:12:p:3497-3509
    DOI: 10.1080/00207543.2017.1282645
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1080/00207543.2017.1282645
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1080/00207543.2017.1282645?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    2. Belassi, W & Fadlalla, A, 1998. "An integrative framework for FMS diffusion," Omega, Elsevier, vol. 26(6), pages 699-713, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Li, Wei & Sun, Hui & Tong, Meng & Mustafee, Navonil & Koh, Lenny, 2024. "Customizing customization in a 3D printing-enabled hybrid manufacturing supply chain," International Journal of Production Economics, Elsevier, vol. 268(C).
    3. Polinpapilinho F. Katina & Casey T. Cash & Logan R. Caldwell & Chrystopher M. Beck & James J. Katina, 2023. "Advanced Manufacturing Management: A Systematic Literature Review," Sustainability, MDPI, vol. 15(6), pages 1-14, March.
    4. Fotis Kitsios & Maria Kamariotou, 2021. "Artificial Intelligence and Business Strategy towards Digital Transformation: A Research Agenda," Sustainability, MDPI, vol. 13(4), pages 1-14, February.
    5. Zehetner, Dominik & Gansterer, Margaretha, 2022. "The collaborative batching problem in multi-site additive manufacturing," International Journal of Production Economics, Elsevier, vol. 248(C).
    6. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    7. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    8. Robert B. Handfield & James Aitken & Neil Turner & Tillmann Boehme & Cecil Bozarth, 2022. "Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies," Logistics, MDPI, vol. 6(2), pages 1-22, June.
    9. Elham Sharifi & Atanu Chaudhuri & Brian Vejrum Waehrens & Lasse Guldborg Staal & Saeed Davoudabadi Farahani, 2021. "Assessing the Suitability of Freeform Injection Molding for Low Volume Injection Molded Parts: A Design Science Approach," Sustainability, MDPI, vol. 13(3), pages 1-19, January.
    10. Jaya Priyadarshini & Rajesh Kr Singh & Ruchi Mishra & Surajit Bag, 2022. "Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach," Operations Management Research, Springer, vol. 15(1), pages 567-588, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lütkenhorst, Wilfried, 2018. "Creating wealth without labour? Emerging contours of a new techno-economic landscape," IDOS Discussion Papers 11/2018, German Institute of Development and Sustainability (IDOS).
    2. Dmitriy Grigorievich Rodionov* & Evgenii Alexandrovich Konnikov & Olga Anatolievna Konnikova, 2018. "Approaches to Ensuring the Sustainability of Industrial Enterprises of Different Technological Levels," The Journal of Social Sciences Research, Academic Research Publishing Group, pages 277-282:3.
    3. Germán Arana-Landín & Naiara Uriarte-Gallastegi & Beñat Landeta-Manzano & Iker Laskurain-Iturbe, 2023. "The Contribution of Lean Management—Industry 4.0 Technologies to Improving Energy Efficiency," Energies, MDPI, vol. 16(5), pages 1-19, February.
    4. Ding, Jin & Baumers, Martin & Clark, Elizabeth A. & Wildman, Ricky D., 2021. "The economics of additive manufacturing: Towards a general cost model including process failure," International Journal of Production Economics, Elsevier, vol. 237(C).
    5. Ukobitz, Desirée Valeria & Faullant, Rita, 2022. "The relative impact of isomorphic pressures on the adoption of radical technology: Evidence from 3D printing," Technovation, Elsevier, vol. 113(C).
    6. Belhadi, Amine & Kamble, Sachin S. & Venkatesh, Mani & Chiappetta Jabbour, Charbel Jose & Benkhati, Imane, 2022. "Building supply chain resilience and efficiency through additive manufacturing: An ambidextrous perspective on the dynamic capability view," International Journal of Production Economics, Elsevier, vol. 249(C).
    7. Giacomo Marzi & Lamberto Zollo & Andrea Boccardi & Cristiano Ciappei, 2018. "Additive Manufacturing in SMEs: Empirical Evidences from Italy," International Journal of Innovation and Technology Management (IJITM), World Scientific Publishing Co. Pte. Ltd., vol. 15(01), pages 1-22, February.
    8. Shih-Chia Chang & Hsu-Hwa Chang & Ming-Tsang Lu, 2021. "Evaluating Industry 4.0 Technology Application in SMEs: Using a Hybrid MCDM Approach," Mathematics, MDPI, vol. 9(4), pages 1-21, February.
    9. Katrin Oettmeier & Erik Hofmann, 2017. "Additive manufacturing technology adoption: an empirical analysis of general and supply chain-related determinants," Journal of Business Economics, Springer, vol. 87(1), pages 97-124, January.
    10. Radu Godina & Inês Ribeiro & Florinda Matos & Bruna T. Ferreira & Helena Carvalho & Paulo Peças, 2020. "Impact Assessment of Additive Manufacturing on Sustainable Business Models in Industry 4.0 Context," Sustainability, MDPI, vol. 12(17), pages 1-21, August.
    11. Inês Ribeiro & Florinda Matos & Celeste Jacinto & Hafiz Salman & Gonçalo Cardeal & Helena Carvalho & Radu Godina & Paulo Peças, 2020. "Framework for Life Cycle Sustainability Assessment of Additive Manufacturing," Sustainability, MDPI, vol. 12(3), pages 1-22, January.
    12. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    13. Candi, Marina & Beltagui, Ahmad, 2019. "Effective use of 3D printing in the innovation process," Technovation, Elsevier, vol. 80, pages 63-73.
    14. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    15. Chekurov, Sergei & Metsä-Kortelainen, Sini & Salmi, Mika & Roda, Irene & Jussila, Ari, 2018. "The perceived value of additively manufactured digital spare parts in industry: An empirical investigation," International Journal of Production Economics, Elsevier, vol. 205(C), pages 87-97.
    16. Thomas-Seale, L.E.J. & Kirkman-Brown, J.C. & Attallah, M.M. & Espino, D.M. & Shepherd, D.E.T., 2018. "The barriers to the progression of additive manufacture: Perspectives from UK industry," International Journal of Production Economics, Elsevier, vol. 198(C), pages 104-118.
    17. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    18. Robert B. Handfield & James Aitken & Neil Turner & Tillmann Boehme & Cecil Bozarth, 2022. "Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies," Logistics, MDPI, vol. 6(2), pages 1-22, June.
    19. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    20. Ana E. Oros Daraban & Catalin S. Negrea & Flavia G. P. Artimon & Dorin Angelescu & Gheorghe Popan & Silviu I. Gheorghe & Marian Gheorghe, 2019. "A Deep Look at Metal Additive Manufacturing Recycling and Use Tools for Sustainability Performance," Sustainability, MDPI, vol. 11(19), pages 1-20, October.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:taf:tprsxx:v:55:y:2017:i:12:p:3497-3509. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Longhurst (email available below). General contact details of provider: http://www.tandfonline.com/TPRS20 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.