IDEAS home Printed from https://ideas.repec.org/a/spr/telsys/v72y2019i2d10.1007_s11235-019-00566-8.html
   My bibliography  Save this article

Reliable networking in Ethernet ring mesh networks using regular topologies

Author

Listed:
  • Mohsen Jahanshahi

    (Islamic Azad University)

  • Fathollah Bistouni

    (Islamic Azad University)

Abstract

Reliable networking is an important factor in Ethernet ring mesh networks (ERMs) with ITU-T G.8032 Ethernet ring protection recommendation or with the IEC 62439-3 high-availability seamless redundancy protocol. However, there are two major challenges for this purpose: (1) Hitherto, irregular topologies are used in ERMs that it causes difficulty in analyzing and improving reliability. (2) A topology is appropriate for practical implementation, if it is low cost, simple to implement, and simple to develop for large scale-systems (i.e. scalable). However, irregular topologies are extremely difficult to implement and develop. To deal with these challenges, this paper introduces two regular topologies called chordal ring and k-cube networks, for the first time in the area of ERMs. In addition, the proposed topologies are carefully analyzed in terms of reliability. These analyzes prove that the proposed regular topologies outperform existing irregular multiple-ring networks namely shared link, shared node, complex shared link, redundant link, and 3-connected network.

Suggested Citation

  • Mohsen Jahanshahi & Fathollah Bistouni, 2019. "Reliable networking in Ethernet ring mesh networks using regular topologies," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 72(2), pages 199-220, October.
    • Handle: RePEc:spr:telsys:v:72:y:2019:i:2:d:10.1007_s11235-019-00566-8
    DOI: 10.1007/s11235-019-00566-8
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s11235-019-00566-8
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s11235-019-00566-8?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bistouni, Fathollah & Jahanshahi, Mohsen, 2017. "Remove and contraction: A novel method for calculating the reliability of Ethernet ring mesh networks," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 362-375.
    2. Bistouni, Fathollah & Jahanshahi, Mohsen, 2015. "Evaluating failure rate of fault-tolerant multistage interconnection networks using Weibull life distribution," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 128-146.
    3. Bistouni, Fathollah & Jahanshahi, Mohsen, 2014. "Analyzing the reliability of shuffle-exchange networks using reliability block diagrams," Reliability Engineering and System Safety, Elsevier, vol. 132(C), pages 97-106.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Basel A. Mahafzah & Aryaf A. Al-Adwan & Rawan I. Zaghloul, 2022. "Topological properties assessment of optoelectronic architectures," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 80(4), pages 599-627, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bistouni, Fathollah & Jahanshahi, Mohsen, 2019. "Reliability-aware ring protection link selection in Ethernet ring mesh networks," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    2. Bistouni, Fathollah & Jahanshahi, Mohsen, 2017. "Remove and contraction: A novel method for calculating the reliability of Ethernet ring mesh networks," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 362-375.
    3. Fathollah Bistouni & Mohsen Jahanshahi, 2016. "Reliability analysis of multilayer multistage interconnection networks," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 62(3), pages 529-551, July.
    4. Boardman, Nicholas T. & Sullivan, Kelly M., 2024. "Approximate dynamic programming for condition-based node deployment in a wireless sensor network," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    5. Park, Jae-Hyun, 2017. "Time-dependent reliability of wireless networks with dependent failures," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 47-61.
    6. Bistouni, Fathollah & Jahanshahi, Mohsen, 2015. "Evaluating failure rate of fault-tolerant multistage interconnection networks using Weibull life distribution," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 128-146.
    7. Amit Prakash & Dilip Kumar Yadav & Arvind Choubey, 2020. "Terminal reliability analysis of multistage interconnection networks," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(1), pages 110-125, February.
    8. Xiao, Yong & Wei, Shanbi & Chai, Yi & Pan, Tianle & Hou, Yang, 2023. "Reliability optimization of flexible test system based on pyro-mechanical device products production driven," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    9. Li, Jian & Dueñas-Osorio, Leonardo & Chen, Changkun & Shi, Congling, 2016. "Connectivity reliability and topological controllability of infrastructure networks: A comparative assessment," Reliability Engineering and System Safety, Elsevier, vol. 156(C), pages 24-33.
    10. Tian-yuan, Ye & Lin-lin, Liu & He-wei, Pang & Yuan-zi, Zhou, 2023. "Bayesian Networks based approach to enhance GO methodology for reliability modeling of multi-state consecutive-k-out-of-n: F system," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    11. Barranco, Manuel & Proenza, Julián & Almeida, Luís, 2015. "Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses," Reliability Engineering and System Safety, Elsevier, vol. 138(C), pages 163-175.
    12. Santhosh, T.V. & Gopika, V. & Ghosh, A.K. & Fernandes, B.G., 2018. "An approach for reliability prediction of instrumentation & control cables by artificial neural networks and Weibull theory for probabilistic safety assessment of NPPs," Reliability Engineering and System Safety, Elsevier, vol. 170(C), pages 31-44.
    13. Yu Zang & Jiaxiang E & Lance Fiondella, 2024. "A Network Reliability Analysis Method for Complex Real-Time Systems: Case Studies in Railway and Maritime Systems," Mathematics, MDPI, vol. 12(19), pages 1-30, September.
    14. Joshua L. Pulsipher & Victor M. Zavala, 2020. "Measuring and optimizing system reliability: a stochastic programming approach," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 28(3), pages 626-645, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:telsys:v:72:y:2019:i:2:d:10.1007_s11235-019-00566-8. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.