IDEAS home Printed from https://ideas.repec.org/a/spr/opsear/v59y2022i4d10.1007_s12597-021-00566-w.html
   My bibliography  Save this article

Modeling of critical success factors for adoption of smart manufacturing system in Indian SMEs: an integrated approach

Author

Listed:
  • Monica Shukla

    (Indian Institute of Technology Delhi)

  • Ravi Shankar

    (Indian Institute of Technology Delhi)

Abstract

The emerging needs to boost manufacturing sector have made developing nations to adopt smart system in their conventional manufacturing system. To achieve this, Smart Manufacturing Systems (SMS) are proving its potential in every way and especially in “Small and Medium Enterprises (SMEs)”, which are highly responsible for economic growth the country. To this effect, this paper aims to investigate “Critical Success Factors (CSFs)” for adoption of SMS in Indian SMEs. The factors are identified on four managerial aspects namely Strategic, Tactical, Operational and Performance. Further, these factors are modelled using an integrated ISM-DEMATEL (“Interpretive Structural Modelling—Decision Making Trial and Evaluation Laboratory”) approach, which not only provides the hierarchy but also reveals the intensity of relationship among the factors. The result shows that strategic level factors like Government initiatives, Future vision of the organization and Technological factors are most crucial for SMS adoption in Indian SMEs. The hierarchy obtained is also in line with importance of managerial decisions, which validate the proposed model. The findings of the study would help government, concerned agencies, organizations and policy makers to make suitable strategy formulation for successful adoption of SMS in Indian SMEs.

Suggested Citation

  • Monica Shukla & Ravi Shankar, 2022. "Modeling of critical success factors for adoption of smart manufacturing system in Indian SMEs: an integrated approach," OPSEARCH, Springer;Operational Research Society of India, vol. 59(4), pages 1271-1303, December.
    • Handle: RePEc:spr:opsear:v:59:y:2022:i:4:d:10.1007_s12597-021-00566-w
    DOI: 10.1007/s12597-021-00566-w
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s12597-021-00566-w
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s12597-021-00566-w?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Raut, Rakesh D. & Priyadarshinee, Pragati & Gardas, Bhaskar B. & Jha, Manoj Kumar, 2018. "Analyzing the factors influencing cloud computing adoption using three stage hybrid SEM-ANN-ISM (SEANIS) approach," Technological Forecasting and Social Change, Elsevier, vol. 134(C), pages 98-123.
    2. Shankar, Ravi & Pathak, Devendra Kumar & Choudhary, Devendra, 2019. "Decarbonizing freight transportation: An integrated EFA-TISM approach to model enablers of dedicated freight corridors," Technological Forecasting and Social Change, Elsevier, vol. 143(C), pages 85-100.
    3. Pragati Priyadarshinee & Manoj Kumar Jha & Rakesh D. Raut & Manoj Govind Kharat & Sachin S. Kamble, 2017. "To identify the critical success factors for cloud computing adoption by MCDM technique," International Journal of Business Information Systems, Inderscience Enterprises Ltd, vol. 24(4), pages 469-510.
    4. Sheng-Li Si & Xiao-Yue You & Hu-Chen Liu & Ping Zhang, 2018. "DEMATEL Technique: A Systematic Review of the State-of-the-Art Literature on Methodologies and Applications," Mathematical Problems in Engineering, Hindawi, vol. 2018, pages 1-33, January.
    5. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    6. Schniederjans, Dara G., 2017. "Adoption of 3D-printing technologies in manufacturing: A survey analysis," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 287-298.
    7. Rameshwar Dubey & Angappa Gunasekaran & Anindya Chakrabarty, 2015. "World-class sustainable manufacturing: framework and a performance measurement system," International Journal of Production Research, Taylor & Francis Journals, vol. 53(17), pages 5207-5223, September.
    8. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    9. Ray Y. Zhong & Chen Xu & Chao Chen & George Q. Huang, 2017. "Big Data Analytics for Physical Internet-based intelligent manufacturing shop floors," International Journal of Production Research, Taylor & Francis Journals, vol. 55(9), pages 2610-2621, May.
    10. Rajdeep Singh & Neeraj Bhanot, 2020. "An integrated DEMATEL-MMDE-ISM based approach for analysing the barriers of IoT implementation in the manufacturing industry," International Journal of Production Research, Taylor & Francis Journals, vol. 58(8), pages 2454-2476, April.
    11. Kiel, Daniel & Arnold, Christian & Voigt, Kai-Ingo, 2017. "The influence of the Industrial Internet of Things on business models of established manufacturing companies – A business level perspective," Technovation, Elsevier, vol. 68(C), pages 4-19.
    12. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    3. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.
    4. Ukobitz, Desirée Valeria & Faullant, Rita, 2022. "The relative impact of isomorphic pressures on the adoption of radical technology: Evidence from 3D printing," Technovation, Elsevier, vol. 113(C).
    5. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    6. Inês Ribeiro & Florinda Matos & Celeste Jacinto & Hafiz Salman & Gonçalo Cardeal & Helena Carvalho & Radu Godina & Paulo Peças, 2020. "Framework for Life Cycle Sustainability Assessment of Additive Manufacturing," Sustainability, MDPI, vol. 12(3), pages 1-22, January.
    7. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    8. Candi, Marina & Beltagui, Ahmad, 2019. "Effective use of 3D printing in the innovation process," Technovation, Elsevier, vol. 80, pages 63-73.
    9. Chekurov, Sergei & Metsä-Kortelainen, Sini & Salmi, Mika & Roda, Irene & Jussila, Ari, 2018. "The perceived value of additively manufactured digital spare parts in industry: An empirical investigation," International Journal of Production Economics, Elsevier, vol. 205(C), pages 87-97.
    10. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    11. Robert B. Handfield & James Aitken & Neil Turner & Tillmann Boehme & Cecil Bozarth, 2022. "Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies," Logistics, MDPI, vol. 6(2), pages 1-22, June.
    12. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    13. Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    14. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    15. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    16. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    17. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    18. Jiang, Ruth & Kleer, Robin & Piller, Frank T., 2017. "Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030," Technological Forecasting and Social Change, Elsevier, vol. 117(C), pages 84-97.
    19. Stornelli, Aldo & Ozcan, Sercan & Simms, Christopher, 2021. "Advanced manufacturing technology adoption and innovation: A systematic literature review on barriers, enablers, and innovation types," Research Policy, Elsevier, vol. 50(6).
    20. Patrick Holzmann & Erich J. Schwarz & David B. Audretsch, 2020. "Understanding the determinants of novel technology adoption among teachers: the case of 3D printing," The Journal of Technology Transfer, Springer, vol. 45(1), pages 259-275, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:opsear:v:59:y:2022:i:4:d:10.1007_s12597-021-00566-w. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.