IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v34y2023i4d10.1007_s10845-021-01872-2.html
   My bibliography  Save this article

Group teaching optimization algorithm with information sharing for numerical optimization and engineering optimization

Author

Listed:
  • Yiying Zhang

    (Jiangsu University)

  • Aining Chi

    (Taizhou University)

Abstract

Most of the reported metaheuristic methods need the control parameters except the essential population size and terminal condition. When these methods are used for solving an unknown problem, how to set the most suitable values for their control parameters to achieve the optimal solution is a great challenge. Group teaching optimization algorithm (GTOA) is a newly presented metaheuristic method, whose remarkable feature is that it only relies on the essential population size and terminal condition for optimization. However, GTOA may get trapped in the local optimal solutions for solving complex optimization problems due to the lack of communication between outstanding group and average group. In order to improve the performance of GTOA, this paper proposes a new variant of GTOA, namely group teaching optimization algorithm with information sharing (ISGTOA). Like GTOA, ISGTOA doesn’t introduce any other control parameters, which enhances the communication between outstanding group and average group by reusing the individuals in the built two archives. The performance of ISGTOA is investigated by CEC 2014 test suite, CEC 2015 test suite, and four challenging constrained engineering design problems. Experimental results prove the superiority of ISGTOA for expensive optimization problems with multimodal properties by comparing with GTOA and other powerful methods. The source codes of the proposed ISGTOA can be found in https://ww2.mathworks.cn/matlabcentral/fileexchange/98629-the-source-code-of-isgtoa and https://github.com/jsuzyy/The-source-code-of-ISGTOA-for-global-optimization .

Suggested Citation

  • Yiying Zhang & Aining Chi, 2023. "Group teaching optimization algorithm with information sharing for numerical optimization and engineering optimization," Journal of Intelligent Manufacturing, Springer, vol. 34(4), pages 1547-1571, April.
    • Handle: RePEc:spr:joinma:v:34:y:2023:i:4:d:10.1007_s10845-021-01872-2
    DOI: 10.1007/s10845-021-01872-2
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-021-01872-2
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10845-021-01872-2?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Atul Mishra & Sankha Deb, 2019. "Assembly sequence optimization using a flower pollination algorithm-based approach," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 461-482, February.
    2. W. C. E. Lim & G. Kanagaraj & S. G. Ponnambalam, 2016. "A hybrid cuckoo search-genetic algorithm for hole-making sequence optimization," Journal of Intelligent Manufacturing, Springer, vol. 27(2), pages 417-429, April.
    3. Ivona Brajević & Jelena Ignjatović, 2019. "An upgraded firefly algorithm with feasibility-based rules for constrained engineering optimization problems," Journal of Intelligent Manufacturing, Springer, vol. 30(6), pages 2545-2574, August.
    4. Chou, Jui-Sheng & Truong, Dinh-Nhat, 2021. "A novel metaheuristic optimizer inspired by behavior of jellyfish in ocean," Applied Mathematics and Computation, Elsevier, vol. 389(C).
    5. Jianxin Zhou & Hu Ye & Xiaoyuan Ji & Weilin Deng, 2019. "An improved backtracking search algorithm for casting heat treatment charge plan problem," Journal of Intelligent Manufacturing, Springer, vol. 30(3), pages 1335-1350, March.
    6. Libin Han & Keyi Xing & Xiao Chen & Fuli Xiong, 2018. "A Petri net-based particle swarm optimization approach for scheduling deadlock-prone flexible manufacturing systems," Journal of Intelligent Manufacturing, Springer, vol. 29(5), pages 1083-1096, June.
    7. Shuaipeng Yuan & Tieke Li & Bailin Wang, 2021. "A discrete differential evolution algorithm for flow shop group scheduling problem with sequence-dependent setup and transportation times," Journal of Intelligent Manufacturing, Springer, vol. 32(2), pages 427-439, February.
    8. Dariush Khezrimotlagh & Yao Chen, 2018. "The Optimization Approach," International Series in Operations Research & Management Science, in: Decision Making and Performance Evaluation Using Data Envelopment Analysis, chapter 0, pages 107-134, Springer.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xinnian Wang & Keyi Xing & Chao-Bo Yan & Mengchu Zhou, 2019. "A Novel MOEA/D for Multiobjective Scheduling of Flexible Manufacturing Systems," Complexity, Hindawi, vol. 2019, pages 1-14, June.
    2. Wattana Viriyasitavat & Li Xu & Zhuming Bi & Assadaporn Sapsomboon, 2020. "Blockchain-based business process management (BPM) framework for service composition in industry 4.0," Journal of Intelligent Manufacturing, Springer, vol. 31(7), pages 1737-1748, October.
    3. Jiaxing Wang & Sibin Gao & Zhejun Tang & Dapeng Tan & Bin Cao & Jing Fan, 2023. "A context-aware recommendation system for improving manufacturing process modeling," Journal of Intelligent Manufacturing, Springer, vol. 34(3), pages 1347-1368, March.
    4. Cosmena Mahapatra & Ashish Payal & Meenu Chopra, 2020. "Swarm intelligence based centralized clustering: a novel solution," Journal of Intelligent Manufacturing, Springer, vol. 31(8), pages 1877-1888, December.
    5. G. Cherif & E. Leclercq & D. Lefebvre, 2023. "Scheduling of a class of partial routing FMS in uncertain environments with beam search," Journal of Intelligent Manufacturing, Springer, vol. 34(2), pages 493-514, February.
    6. Wang, Yongli & Wang, Yudong & Huang, Yujing & Yang, Jiale & Ma, Yuze & Yu, Haiyang & Zeng, Ming & Zhang, Fuwei & Zhang, Yanfu, 2019. "Operation optimization of regional integrated energy system based on the modeling of electricity-thermal-natural gas network," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    7. Yang, Lin & Pang, Shujiang & Wang, Xiaoyan & Du, Yi & Huang, Jieyu & Melching, Charles S., 2021. "Optimal allocation of best management practices based on receiving water capacity constraints," Agricultural Water Management, Elsevier, vol. 258(C).
    8. Wu, Jiansong & Zhang, Linlin & Bai, Yiping & Reniers, Genserik, 2022. "A safety investment optimization model for power grid enterprises based on System Dynamics and Bayesian network theory," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    9. Xu, Xiangdong & Qu, Kai & Chen, Anthony & Yang, Chao, 2021. "A new day-to-day dynamic network vulnerability analysis approach with Weibit-based route adjustment process," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 153(C).
    10. Wang, Yongli & Li, Jiapu & Wang, Shuo & Yang, Jiale & Qi, Chengyuan & Guo, Hongzhen & Liu, Ximei & Zhang, Hongqing, 2020. "Operational optimization of wastewater reuse integrated energy system," Energy, Elsevier, vol. 200(C).
    11. Changyu Zhou & Guohe Huang & Jiapei Chen, 2019. "A Type-2 Fuzzy Chance-Constrained Fractional Integrated Modeling Method for Energy System Management of Uncertainties and Risks," Energies, MDPI, vol. 12(13), pages 1-21, June.
    12. Hu, Lin & Hu, Xiaosong & Che, Yunhong & Feng, Fei & Lin, Xianke & Zhang, Zhiyong, 2020. "Reliable state of charge estimation of battery packs using fuzzy adaptive federated filtering," Applied Energy, Elsevier, vol. 262(C).
    13. Vijay Rathod, 2023. "Multi-drill path sequencing models: A comparative study," OPSEARCH, Springer;Operational Research Society of India, vol. 60(1), pages 554-570, March.
    14. Hao, Ran & Lu, Tianguang & Ai, Qian & Wang, Zhe & Wang, Xiaolong, 2020. "Distributed online learning and dynamic robust standby dispatch for networked microgrids," Applied Energy, Elsevier, vol. 274(C).
    15. Yuhong Shuai & Liming Yao, 2021. "Adjustable Robust Optimization for Multi-Period Water Allocation in Droughts Under Uncertainty," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 35(12), pages 4043-4065, September.
    16. Yinhe Bu & Xingping Zhang, 2021. "On the Way to Integrate Increasing Shares of Variable Renewables in China: Experience from Flexibility Modification and Deep Peak Regulation Ancillary Service Market Based on MILP-UC Programming," Sustainability, MDPI, vol. 13(5), pages 1-22, February.
    17. Donovin D. Lewis & Aron Patrick & Evan S. Jones & Rosemary E. Alden & Abdullah Al Hadi & Malcolm D. McCulloch & Dan M. Ionel, 2023. "Decarbonization Analysis for Thermal Generation and Regionally Integrated Large-Scale Renewables Based on Minutely Optimal Dispatch with a Kentucky Case Study," Energies, MDPI, vol. 16(4), pages 1-23, February.
    18. Ahmed Ginidi & Sherif M. Ghoneim & Abdallah Elsayed & Ragab El-Sehiemy & Abdullah Shaheen & Attia El-Fergany, 2021. "Gorilla Troops Optimizer for Electrically Based Single and Double-Diode Models of Solar Photovoltaic Systems," Sustainability, MDPI, vol. 13(16), pages 1-28, August.
    19. Li, Yang & Wang, Bin & Yang, Zhen & Li, Jiazheng & Chen, Chen, 2022. "Hierarchical stochastic scheduling of multi-community integrated energy systems in uncertain environments via Stackelberg game," Applied Energy, Elsevier, vol. 308(C).
    20. Xu, Jie & Lv, Tao & Hou, Xiaoran & Deng, Xu & Liu, Feng, 2021. "Provincial allocation of renewable portfolio standard in China based on efficiency and fairness principles," Renewable Energy, Elsevier, vol. 179(C), pages 1233-1245.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:34:y:2023:i:4:d:10.1007_s10845-021-01872-2. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.