IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v32y2021i8d10.1007_s10845-020-01628-4.html
   My bibliography  Save this article

Statistical process monitoring in a specified period for the image data of fused deposition modeling parts with consistent layers

Author

Listed:
  • Tingting Huang

    (Beihang University)

  • Shanggang Wang

    (Beihang University)

  • Shunkun Yang

    (Beihang University)

  • Wei Dai

    (Beihang University)

Abstract

Statistical process monitoring (SPM) methods have been adopted and studied to detect variations in the fused deposition modeling (FDM) process in recent years. The FDM process that builds parts layer-by-layer is accomplished in a specified manufacturing period (number of layers) without interruption or suspension. Thus, traditional SPM methods, where the average run length is used for the calculation of the control limits and the measurement of the performance, are no longer applicable to the FDM process. In this paper, an SPM method is proposed based on the surface image data of FDM parts with consistent layers and a specified period. The probability of alarm in a specified period (PASP) and the cumulative PASP are introduced to determine the control limits and evaluate the monitoring performance. Regions of interest are determined in a fixed way to cover the sizes and locations of different defects. The statistics are calculated based on the generalized likelihood ratio. The control limit is determined based on the specified period and the nominal in-control PASP. A simulation study for different locations, sizes and magnitudes of the mean shift of defects is presented. In the case study, the proposed SPM method is applied to monitor the FDM process of a cuboid, which verifies the effectiveness of the proposed method.

Suggested Citation

  • Tingting Huang & Shanggang Wang & Shunkun Yang & Wei Dai, 2021. "Statistical process monitoring in a specified period for the image data of fused deposition modeling parts with consistent layers," Journal of Intelligent Manufacturing, Springer, vol. 32(8), pages 2181-2196, December.
  • Handle: RePEc:spr:joinma:v:32:y:2021:i:8:d:10.1007_s10845-020-01628-4
    DOI: 10.1007/s10845-020-01628-4
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-020-01628-4
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.

    File URL: https://libkey.io/10.1007/s10845-020-01628-4?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Margavio, Thomas M. & Conerly, Michael D. & Woodall, William H. & Drake, Laurel G., 1995. "Alarm rates for quality control charts," Statistics & Probability Letters, Elsevier, vol. 24(3), pages 219-224, August.
    2. Ketai He & Qian Zhang & Yili Hong, 2019. "Profile monitoring based quality control method for fused deposition modeling process," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 947-958, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Douglas A. J. Brion & Sebastian W. Pattinson, 2022. "Generalisable 3D printing error detection and correction via multi-head neural networks," Nature Communications, Nature, vol. 13(1), pages 1-14, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Antonio Caputi & Davide Russo, 2021. "The optimization of the control logic of a redundant six axis milling machine," Journal of Intelligent Manufacturing, Springer, vol. 32(5), pages 1441-1453, June.
    2. Seven Knoth, 2005. "Fast initial response features for EWMA control charts," Statistical Papers, Springer, vol. 46(1), pages 47-64, January.
    3. Rafajlowicz, Ewaryst & Pawlak, Mirosław & Steland, Ansgar, 2004. "Non-parametric vertical box control chart for monitoring the mean," Technical Reports 2004,52, Technische Universität Dortmund, Sonderforschungsbereich 475: Komplexitätsreduktion in multivariaten Datenstrukturen.
    4. Marianne Frisén, 2003. "Statistical Surveillance. Optimality and Methods," International Statistical Review, International Statistical Institute, vol. 71(2), pages 403-434, August.
    5. William H. Woodall & J Brooke Marshall & Michael D. Joner Jr & Shannon E Fraker & Abdel‐Salam G Abdel‐Salam, 2008. "On the use and evaluation of prospective scan methods for health‐related surveillance," Journal of the Royal Statistical Society Series A, Royal Statistical Society, vol. 171(1), pages 223-237, January.
    6. Xiaobei Shen & Changliang Zou & Wei Jiang & Fugee Tsung, 2013. "Monitoring poisson count data with probability control limits when sample sizes are time varying," Naval Research Logistics (NRL), John Wiley & Sons, vol. 60(8), pages 625-636, December.
    7. Wenjuan Liang & Xiaolong Pu & Dongdong Xiang, 2017. "A distribution-free multivariate CUSUM control chart using dynamic control limits," Journal of Applied Statistics, Taylor & Francis Journals, vol. 44(11), pages 2075-2093, August.
    8. Douglas A. J. Brion & Sebastian W. Pattinson, 2022. "Generalisable 3D printing error detection and correction via multi-head neural networks," Nature Communications, Nature, vol. 13(1), pages 1-14, December.
    9. Lee J. Wells & Romina Dastoorian & Jaime A. Camelio, 2021. "A novel NURBS surface approach to statistically monitor manufacturing processes with point cloud data," Journal of Intelligent Manufacturing, Springer, vol. 32(2), pages 329-345, February.
    10. Nishina Ken & Nishiyuki Shintaro, 2003. "False Alarm Probability Function of Cusum Charts," Stochastics and Quality Control, De Gruyter, vol. 18(1), pages 101-112, January.
    11. Taras Lazariv & Wolfgang Schmid, 2019. "Surveillance of non-stationary processes," AStA Advances in Statistical Analysis, Springer;German Statistical Society, vol. 103(3), pages 305-331, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:32:y:2021:i:8:d:10.1007_s10845-020-01628-4. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.