IDEAS home Printed from https://ideas.repec.org/a/spr/ijsaem/v12y2021i2d10.1007_s13198-021-01053-7.html
   My bibliography  Save this article

Integrated economic design of quality control and maintenance management: Implications for managing manufacturing process

Author

Listed:
  • Rajesh Saha

    (Bangladesh University of Engineering and Technology)

  • Abdullahil Azeem

    (Bangladesh University of Engineering and Technology)

  • Kazi Wahadul Hasan

    (Bangladesh University of Engineering and Technology)

  • Syed Mithun Ali

    (Bangladesh University of Engineering and Technology)

  • Sanjoy Kumar Paul

    (University of Technology Sydney)

Abstract

This paper develops an integrated economic model for the joint optimization of quality control parameters and a preventive maintenance policy using the cumulative sum (CUSUM) control chart and variable sampling interval fixed time sampling policy. To determine the in-control and out-of-control cost for both mean and variance, a Taguchi quadratic loss function and modified linear loss function are used, respectively. Imperfect preventive maintenance and minimal corrective maintenance policies were considered in developing the model, which determines the optimal values for significant process parameters to minimize the total expected cost per unit of time. A numerical example is used to test the model, which is followed by a sensitivity analysis. The integration of CUSUM mean and variance charts with the maintenance actions are proven successful to detect the slightest shift of the process. The findings reveal that among all the cost components, process failure due to external causes and equipment breakdown has a noteworthy attribute to the total costs of the optimized model. It is expected that top managers can utilize the suggested combined model to minimize the costs related to quality loss and maintenance policy and achieve economical advantages as well.

Suggested Citation

  • Rajesh Saha & Abdullahil Azeem & Kazi Wahadul Hasan & Syed Mithun Ali & Sanjoy Kumar Paul, 2021. "Integrated economic design of quality control and maintenance management: Implications for managing manufacturing process," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(2), pages 263-280, April.
  • Handle: RePEc:spr:ijsaem:v:12:y:2021:i:2:d:10.1007_s13198-021-01053-7
    DOI: 10.1007/s13198-021-01053-7
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s13198-021-01053-7
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.

    File URL: https://libkey.io/10.1007/s13198-021-01053-7?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Serel, Dogan A. & Moskowitz, Herbert, 2008. "Joint economic design of EWMA control charts for mean and variance," European Journal of Operational Research, Elsevier, vol. 184(1), pages 157-168, January.
    2. Cheng, Guo Qing & Zhou, Bing Hai & Li, Ling, 2018. "Integrated production, quality control and condition-based maintenance for imperfect production systems," Reliability Engineering and System Safety, Elsevier, vol. 175(C), pages 251-264.
    3. Ben-Daya, M. & Rahim, M. A., 2000. "Effect of maintenance on the economic design of -control chart," European Journal of Operational Research, Elsevier, vol. 120(1), pages 131-143, January.
    4. Liu, Liping & Yu, Miaomiao & Ma, Yizhong & Tu, Yiliu, 2013. "Economic and economic-statistical designs of an X¯ control chart for two-unit series systems with condition-based maintenance," European Journal of Operational Research, Elsevier, vol. 226(3), pages 491-499.
    5. Ineen Sultana & Imtiaz Ahmed & Abdullahil Azeem & Nitish Ranjan Sarker, 2018. "Economic design of exponentially weighted moving average chart with variable sampling interval at fixed times scheme incorporating Taguchi loss function," International Journal of Industrial and Systems Engineering, Inderscience Enterprises Ltd, vol. 29(4), pages 428-452.
    6. Bouslah, Bassem & Gharbi, Ali & Pellerin, Robert, 2018. "Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures," International Journal of Production Economics, Elsevier, vol. 195(C), pages 210-226.
    7. Cheng, Guoqing & Li, Ling, 2020. "Joint optimization of production, quality control and maintenance for serial-parallel multistage production systems," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    8. Olatunde A. Adeoti & John O. Olaomi, 2018. "Capability index-based control chart for monitoring process mean using repetitive sampling," Communications in Statistics - Theory and Methods, Taylor & Francis Journals, vol. 47(2), pages 493-507, January.
    9. Xiang, Yisha, 2013. "Joint optimization of X¯ control chart and preventive maintenance policies: A discrete-time Markov chain approach," European Journal of Operational Research, Elsevier, vol. 229(2), pages 382-390.
    10. Esmaeil Esmaeili & Hasan Karimian & Mohammad Najjartabar Bisheh, 2019. "Analyzing the productivity of maintenance systems using system dynamics modeling method," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(2), pages 201-211, April.
    11. Bouslah, B. & Gharbi, A. & Pellerin, R., 2016. "Integrated production, sampling quality control and maintenance of deteriorating production systems with AOQL constraint," Omega, Elsevier, vol. 61(C), pages 110-126.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rasool Motahari & Yasser Saeidi Sough & Hamed Aboutorab & Morteza Saberi, 2021. "Joint optimization of maintenance and inventory policies for multi-unit systems," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(3), pages 587-607, June.
    2. Boumallessa, Zeineb & Chouikhi, Houssam & Elleuch, Mounir & Bentaher, Hatem, 2023. "Modeling and optimizing the maintenance schedule using dynamic quality and machine condition monitors in an unreliable single production system," Reliability Engineering and System Safety, Elsevier, vol. 235(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tambe, Pravin P. & Kulkarni, Makarand S., 2022. "A reliability based integrated model of maintenance planning with quality control and production decision for improving operational performance," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    2. Ait-El-Cadi, Abdessamad & Gharbi, Ali & Dhouib, Karem & Artiba, Abdelhakim, 2021. "Integrated production, maintenance and quality control policy for unreliable manufacturing systems under dynamic inspection," International Journal of Production Economics, Elsevier, vol. 236(C).
    3. Azimpoor, Samareh & Taghipour, Sharareh, 2021. "Joint inspection and product quality optimization for a system with delayed failure," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    4. Rasay, Hasan & Taghipour, Sharareh & Sharifi, Mani, 2022. "An integrated Maintenance and Statistical Process Control Model for a Deteriorating Production Process," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    5. Cheng, Guoqing & Li, Ling, 2020. "Joint optimization of production, quality control and maintenance for serial-parallel multistage production systems," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    6. Boumallessa, Zeineb & Chouikhi, Houssam & Elleuch, Mounir & Bentaher, Hatem, 2023. "Modeling and optimizing the maintenance schedule using dynamic quality and machine condition monitors in an unreliable single production system," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    7. Wang, Lin & Lu, Zhiqiang & Ren, Yifei, 2020. "Joint production control and maintenance policy for a serial system with quality deterioration and stochastic demand," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    8. Bouslah, B. & Gharbi, A. & Pellerin, R., 2016. "Joint economic design of production, continuous sampling inspection and preventive maintenance of a deteriorating production system," International Journal of Production Economics, Elsevier, vol. 173(C), pages 184-198.
    9. Yin, Hui & Zhang, Guojun & Zhu, Haiping & Deng, Yuhao & He, Fei, 2015. "An integrated model of statistical process control and maintenance based on the delayed monitoring," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 323-333.
    10. Aminu Sahabi Abubakar & Zied Hajej & Aime C. Nyoungue, 2023. "Multi-Product Production Optimization of Maintenance Integrated into the Control Chart Under Service Level and Quality Constraints," International Journal of Operations Management, Inovatus Services Ltd., vol. 3(2), pages 7-21, May.
    11. Amir Ahmadi-Javid & Mohsen Ebadi, 2017. "Economic Design of Memory-Type Control Charts: The Fallacy of the Formula Proposed by Lorenzen and Vance (1986)," Papers 1708.06160, arXiv.org.
    12. Kenné, Jean-Pierre & Gharbi, Ali, 2018. "Production and replacement policies for a deteriorating manufacturing system under random demand and qualityAuthor-Name: Ouaret, Samir," European Journal of Operational Research, Elsevier, vol. 264(2), pages 623-636.
    13. de Jonge, Bram & Scarf, Philip A., 2020. "A review on maintenance optimization," European Journal of Operational Research, Elsevier, vol. 285(3), pages 805-824.
    14. Wei, Shuaichong & Nourelfath, Mustapha & Nahas, Nabil, 2023. "Analysis of a production line subject to degradation and preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    15. Ye, Zhenggeng & Cai, Zhiqiang & Yang, Hui & Si, Shubin & Zhou, Fuli, 2023. "Joint optimization of maintenance and quality inspection for manufacturing networks based on deep reinforcement learning," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    16. Leoni, Leonardo & De Carlo, Filippo & Tucci, Mario, 2023. "Developing a framework for generating production-dependent failure rate through discrete-event simulation," International Journal of Production Economics, Elsevier, vol. 266(C).
    17. Fakher, Hossein Beheshti & Nourelfath, Mustapha & Gendreau, Michel, 2018. "Integrating production, maintenance and quality: A multi-period multi-product profit-maximization model," Reliability Engineering and System Safety, Elsevier, vol. 170(C), pages 191-201.
    18. Zhou, Wenhui & Zheng, Zhibin & Xie, Wei, 2017. "A control-chart-based queueing approach for service facility maintenance with energy-delay tradeoff," European Journal of Operational Research, Elsevier, vol. 261(2), pages 613-625.
    19. Liping Liu & Lining Jiang & Ding Zhang, 2017. "An integrated model of statistical process control and condition-based maintenance for deteriorating systems," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 68(11), pages 1452-1460, November.
    20. Patrick Zschech & Kai Heinrich & Raphael Bink & Janis S. Neufeld, 2019. "Prognostic Model Development with Missing Labels," Business & Information Systems Engineering: The International Journal of WIRTSCHAFTSINFORMATIK, Springer;Gesellschaft für Informatik e.V. (GI), vol. 61(3), pages 327-343, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:ijsaem:v:12:y:2021:i:2:d:10.1007_s13198-021-01053-7. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.