IDEAS home Printed from https://ideas.repec.org/a/spr/endesu/v23y2021i11d10.1007_s10668-021-01357-5.html
   My bibliography  Save this article

Sustainable production and consumption: analysing barriers and solutions for maintaining green tomorrow by using fuzzy-AHP–fuzzy-TOPSIS hybrid framework

Author

Listed:
  • Shivam Goyal

    (National Institute of Technology)

  • Dixit Garg

    (National Institute of Technology)

  • Sunil Luthra

    (Ch. Ranbir Singh State Institute of Engineering & Technology)

Abstract

Conventional production and consumption system results in rapid depletion of natural resources. Particularly in developing economies, the key factor behind environmental damage is conventional production and consumption. This problem can be overcome by adopting sustainable production and consumption (SPC) initiatives. But for implementation of SPC, proper knowledge of various challenges and solutions is required as in case of any failure it may lead to heavy losses. So in this research study, efforts have been put to identify various barriers in adopting SPC and various solutions to make these barriers less intense. Keeping Indian manufacturing industry in focus, total twenty-six barriers under six different heads were identified with the help of the literature and experts’ input. Fuzzy-AHP MCDM methodology has been adopted to identify the relative importance of all these barriers. As a result, it is found that Government-related barriers, Management-related barriers and Finance-related barriers are the key barriers to be focused for adopting the SPC. Further thirteen solutions either to remove the barriers or to lower the impacts of barriers were identified from the literature and experts’ input. These thirteen solutions were ranked using fuzzy-TOPSIS methodology. The final results provided the prioritised list of all twenty-six barriers and thirteen solutions, which will be helpful in understanding the concept of SPC. Further sensitivity analysis has also been done to ensure the correctness of the results obtained. The literature is full of researches focused on identification and analysis of barriers, but very few studies like ours are available, which also analyse various solutions along with barriers. This work will be helpful for government and management in making policies to promote SPC. Finally, this work will be very beneficial for all, who are focused towards SPC.

Suggested Citation

  • Shivam Goyal & Dixit Garg & Sunil Luthra, 2021. "Sustainable production and consumption: analysing barriers and solutions for maintaining green tomorrow by using fuzzy-AHP–fuzzy-TOPSIS hybrid framework," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(11), pages 16934-16980, November.
    • Handle: RePEc:spr:endesu:v:23:y:2021:i:11:d:10.1007_s10668-021-01357-5
    DOI: 10.1007/s10668-021-01357-5
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10668-021-01357-5
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10668-021-01357-5?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Vishal A. Bhosale & Ravi Kant, 2014. "Selection of best knowledge flow practicing organisation using hybrid fuzzy AHP-VIKOR method," International Journal of Decision Sciences, Risk and Management, Inderscience Enterprises Ltd, vol. 5(3), pages 234-262.
    2. Govindan, Kannan, 2018. "Sustainable consumption and production in the food supply chain: A conceptual framework," International Journal of Production Economics, Elsevier, vol. 195(C), pages 419-431.
    3. Julia Szulecka, 2019. "Towards Sustainable Wood-Based Energy: Evaluation and Strategies for Mainstreaming Sustainability in the Sector," Sustainability, MDPI, vol. 11(2), pages 1-21, January.
    4. Luthra, Sunil & Mangla, Sachin Kumar & Xu, Lei & Diabat, Ali, 2016. "Using AHP to evaluate barriers in adopting sustainable consumption and production initiatives in a supply chain," International Journal of Production Economics, Elsevier, vol. 181(PB), pages 342-349.
    5. Mathias Reynaert, 2021. "Abatement Strategies and the Cost of Environmental Regulation: Emission Standards on the European Car Market," The Review of Economic Studies, Review of Economic Studies Ltd, vol. 88(1), pages 454-488.
    6. Dubey, Rameshwar & Gunasekaran, Angappa & Samar Ali, Sadia, 2015. "Exploring the relationship between leadership, operational practices, institutional pressures and environmental performance: A framework for green supply chain," International Journal of Production Economics, Elsevier, vol. 160(C), pages 120-132.
    7. Jayaram, Jayanth & Avittathur, Balram, 2015. "Green supply chains: A perspective from an emerging economy," International Journal of Production Economics, Elsevier, vol. 164(C), pages 234-244.
    8. Xianbing Liu & Jie Yang & Sixiao Qu & Leina Wang & Tomohiro Shishime & Cunkuan Bao, 2012. "Sustainable Production: Practices and Determinant Factors of Green Supply Chain Management of Chinese Companies," Business Strategy and the Environment, Wiley Blackwell, vol. 21(1), pages 1-16, January.
    9. Dalia M. Ibrahiem, 2018. "Road energy consumption, economic growth, population and urbanization in Egypt: cointegration and causality analysis," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 20(3), pages 1053-1066, June.
    10. Zhou, Shan & Yang, Pu, 2020. "Risk management in distributed wind energy implementing Analytic Hierarchy Process," Renewable Energy, Elsevier, vol. 150(C), pages 616-623.
    11. Roberto Merli & Michele Preziosi & Ilaria Massa, 2015. "Social Values and Sustainability: A Survey on Drivers, Barriers and Benefits of SA8000 Certification in Italian Firms," Sustainability, MDPI, vol. 7(4), pages 1-11, April.
    12. Candice Stevens, 2010. "Linking sustainable consumption and production: The government role," Natural Resources Forum, Blackwell Publishing, vol. 34(1), pages 16-23, February.
    13. Sarkis, Joseph & Zhu, Qinghua & Lai, Kee-hung, 2011. "An organizational theoretic review of green supply chain management literature," International Journal of Production Economics, Elsevier, vol. 130(1), pages 1-15, March.
    14. Muhammad Waqas & Qian-li Dong & Naveed Ahmad & Yuming Zhu & Muhammad Nadeem, 2018. "Critical Barriers to Implementation of Reverse Logistics in the Manufacturing Industry: A Case Study of a Developing Country," Sustainability, MDPI, vol. 10(11), pages 1-25, November.
    15. A.S. Balakrishnan & Jayshree Suresh, 2018. "Green supply chain management in Indian automotive sector," International Journal of Logistics Systems and Management, Inderscience Enterprises Ltd, vol. 29(4), pages 502-523.
    16. Kar, Sanjay Kumar & Sharma, Atul & Roy, Biswajit, 2016. "Solar energy market developments in India," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 121-133.
    17. Yoram Wind & Thomas L. Saaty, 1980. "Marketing Applications of the Analytic Hierarchy Process," Management Science, INFORMS, vol. 26(7), pages 641-658, July.
    18. Lanndon A. Ocampo, 2019. "Applying fuzzy AHP–TOPSIS technique in identifying the content strategy of sustainable manufacturing for food production," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 21(5), pages 2225-2251, October.
    19. Mohit Tyagi & Pradeep Kumar & Dinesh Kumar, 2015. "Analysis of interactions among the drivers of green supply chain management," International Journal of Business Performance and Supply Chain Modelling, Inderscience Enterprises Ltd, vol. 7(1), pages 92-108.
    20. Azzah Al-Maskari & Majed Al-Maskari & Mansoor Alqanoobi & Siraj Kunjumuhammed, 2019. "Internal and external obstacles facing medium and large enterprises in Rusayl Industrial Estates in the Sultanate of Oman," Journal of Global Entrepreneurship Research, Springer;UNESCO Chair in Entrepreneurship, vol. 9(1), pages 1-20, December.
    21. de Ron, Ad J., 1998. "Sustainable production: The ultimate result of a continuous improvement," International Journal of Production Economics, Elsevier, vol. 56(1), pages 99-110, September.
    22. Genovese, Andrea & Acquaye, Adolf A. & Figueroa, Alejandro & Koh, S.C. Lenny, 2017. "Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications," Omega, Elsevier, vol. 66(PB), pages 344-357.
    23. R. J. Welford, 1998. "Editorial: Corporate environmental management, technology and sustainable development: postmodern perspectives and the need for a critical research agenda," Business Strategy and the Environment, Wiley Blackwell, vol. 7(1), pages 1-12, February.
    24. Forman, Ernest & Peniwati, Kirti, 1998. "Aggregating individual judgments and priorities with the analytic hierarchy process," European Journal of Operational Research, Elsevier, vol. 108(1), pages 165-169, July.
    25. Peter Lund-Thomsen & Adam Lindgreen & Joelle Vanhamme, 2016. "Industrial Clusters and Corporate Social Responsibility in Developing Countries: What We Know, What We do not Know, and What We Need to Know," Journal of Business Ethics, Springer, vol. 133(1), pages 9-24, January.
    26. Sachin K. Patil & Ravi Kant, 2014. "Ranking the barriers of knowledge management adoption in supply chain using fuzzy AHP method," International Journal of Business Innovation and Research, Inderscience Enterprises Ltd, vol. 8(1), pages 52-75.
    27. Nazzal, Dima & Batarseh, Ola & Patzner, Joshua & Martin, Darren R., 2013. "Product servicing for lifespan extension and sustainable consumption: An optimization approach," International Journal of Production Economics, Elsevier, vol. 142(1), pages 105-114.
    28. Calabrese, Armando & Costa, Roberta & Levialdi, Nathan & Menichini, Tamara, 2019. "Integrating sustainability into strategic decision-making: A fuzzy AHP method for the selection of relevant sustainability issues," Technological Forecasting and Social Change, Elsevier, vol. 139(C), pages 155-168.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. E. Ahila Devi & S. Radhika & A. Chandrasekar, 2023. "An energy-efficient MANET relay node selection and routing using a fuzzy-based analytic hierarchy process," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 83(2), pages 209-226, June.
    2. Denis Jelačić & Andreja Pirc Barčić & Leon Oblak & Darko Motik & Petra Grošelj & Matej Jošt, 2021. "Sustainable Production Management Model for Small and Medium Enterprises in Some South-Central EU Countries," Sustainability, MDPI, vol. 13(11), pages 1-15, May.
    3. Solangi, Yasir Ahmed & Jianguo, Du, 2023. "Examining challenges and solutions for environmental and natural resource management with a focus on mineral resources," Resources Policy, Elsevier, vol. 86(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Luthra, Sunil & Mangla, Sachin Kumar & Xu, Lei & Diabat, Ali, 2016. "Using AHP to evaluate barriers in adopting sustainable consumption and production initiatives in a supply chain," International Journal of Production Economics, Elsevier, vol. 181(PB), pages 342-349.
    2. Rakesh Kumar Malviya & Ravi Kant & Ashim Dutta Gupta, 2018. "Evaluation and Selection of Sustainable Strategy for Green Supply Chain Management Implementation," Business Strategy and the Environment, Wiley Blackwell, vol. 27(4), pages 475-502, May.
    3. Luo, Zongwei & Dubey, Rameshwar & Gunasekaran, Angappa & Childe, Stephen J. & Papadopoulos, Thanos & Hazen, Benjamin & Roubaud, David, 2017. "Sustainable production framework for cement manufacturing firms: A behavioural perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 495-502.
    4. Hisham Alidrisi, 2021. "Measuring the Environmental Maturity of the Supply Chain Finance: A Big Data-Based Multi-Criteria Perspective," Logistics, MDPI, vol. 5(2), pages 1-24, April.
    5. Dubey, Rameshwar & Gunasekaran, Angappa & Childe, Stephen J. & Papadopoulos, Thanos & Wamba, Samuel Fosso & Song, Malin, 2016. "Towards a theory of sustainable consumption and production: Constructs and measurement," Resources, Conservation & Recycling, Elsevier, vol. 106(C), pages 78-89.
    6. José Roberto Mendoza-Fong & Jorge Luis García-Alcaraz & José Roberto Díaz-Reza & Emilio Jiménez-Macías & Julio Blanco-Fernández, 2019. "The Role of Green Attributes in Production Processes as Well as Their Impact on Operational, Commercial, and Economic Benefits," Sustainability, MDPI, vol. 11(5), pages 1-23, March.
    7. M. K. Dhillon & P. M. Rafi-Ul-Shan & H. Amar & F. Sher & S. Ahmed, 2023. "Flexible Green Supply Chain Management in Emerging Economies: A Systematic Literature Review," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 24(1), pages 1-28, March.
    8. Orji, Ifeyinwa Juliet & Liu, Shaoxuan, 2020. "A dynamic perspective on the key drivers of innovation-led lean approaches to achieve sustainability in manufacturing supply chain," International Journal of Production Economics, Elsevier, vol. 219(C), pages 480-496.
    9. Tamoor Azam & Songjiang Wang & Muhammad Mohsin & Muhammad Nazam & Muhammad Hashim & Sajjad Ahmad Baig & Muhammad Zia-ur-Rehman, 2021. "Does Stakeholder Pressure Matters in Adopting Sustainable Supply Chain Initiatives? Insights from Agro-Based Processing Industry," Sustainability, MDPI, vol. 13(13), pages 1-30, June.
    10. Çağlar Kıvanç Kaymaz & Salih Birinci & Yusuf Kızılkan, 2022. "Sustainable development goals assessment of Erzurum province with SWOT-AHP analysis," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(3), pages 2986-3012, March.
    11. Luthra, Sunil & Govindan, Kannan & Mangla, Sachin Kumar, 2017. "Structural model for sustainable consumption and production adoption—A grey-DEMATEL based approach," Resources, Conservation & Recycling, Elsevier, vol. 125(C), pages 198-207.
    12. Surajit Bag & Shivam Gupta, 2017. "Antecedents of Sustainable Innovation in Supplier Networks: A South African Experience," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 18(3), pages 231-250, September.
    13. Chamoli, Sunil, 2015. "Hybrid FAHP (fuzzy analytical hierarchy process)-FTOPSIS (fuzzy technique for order preference by similarity of an ideal solution) approach for performance evaluation of the V down perforated baffle r," Energy, Elsevier, vol. 84(C), pages 432-442.
    14. Hongtao Ren & Wenji Zhou & Marek Makowski & Hongbin Yan & Yadong Yu & Tieju Ma, 2021. "Incorporation of life cycle emissions and carbon price uncertainty into the supply chain network management of PVC production," Annals of Operations Research, Springer, vol. 300(2), pages 601-620, May.
    15. Davies, Jennifer & Sharifi, Hossein & Lyons, Andrew & Forster, Rick & Elsayed, Omar Khaled Shokry Mohamed, 2024. "Non-fungible tokens: The missing ingredient for sustainable supply chains in the metaverse age?," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 182(C).
    16. Seles, Bruno Michel Roman Pais & de Sousa Jabbour, Ana Beatriz Lopes & Jabbour, Charbel José Chiappetta & Dangelico, Rosa Maria, 2016. "The green bullwhip effect, the diffusion of green supply chain practices, and institutional pressures: Evidence from the automotive sector," International Journal of Production Economics, Elsevier, vol. 182(C), pages 342-355.
    17. Al-Husain, Raed & Khorramshahgol, Reza, 2020. "Incorporating analytical hierarchy process and goal programming to design responsive and efficient supply chains," Operations Research Perspectives, Elsevier, vol. 7(C).
    18. Bressanelli, Gianmarco & Visintin, Filippo & Saccani, Nicola, 2022. "Circular Economy and the evolution of industrial districts: a supply chain perspective," International Journal of Production Economics, Elsevier, vol. 243(C).
    19. S. Maryam Masoumi & Nima Kazemi & Salwa Hanim Abdul-Rashid, 2019. "Sustainable Supply Chain Management in the Automotive Industry: A Process-Oriented Review," Sustainability, MDPI, vol. 11(14), pages 1-30, July.
    20. Pérez-Mesa, Juan Carlos & Galdeano-Gómez, Emilio & Salinas Andújar, Jose A., 2012. "Logistics network and externalities for short sea transport: An analysis of horticultural exports from southeast Spain," Transport Policy, Elsevier, vol. 24(C), pages 188-198.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:endesu:v:23:y:2021:i:11:d:10.1007_s10668-021-01357-5. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.