IDEAS home Printed from https://ideas.repec.org/a/spr/circec/v1y2021i3d10.1007_s43615-021-00047-8.html
   My bibliography  Save this article

Manufacturing Zero-Waste COVID-19 Personal Protection Equipment: a Case Study of Utilizing 3D Printing While Employing Waste Material Recycling

Author

Listed:
  • Antreas Kantaros

    (University of West Attica)

  • Nikolaos Laskaris

    (University of West Attica)

  • Dimitrios Piromalis

    (University of West Attica)

  • Theodore Ganetsos

    (University of West Attica)

Abstract

COVID-19 pandemic outbreak dictated the extensive use of personal protective equipment (PPE) by the majority of the population and mostly by frontline professionals. This need triggered a sudden demand that led to a global shortage of available PPEs threatening to have an immense contribution to the virus contamination spread. In these conditions, the need for a local, flexible, and rapid manufacturing method that would be able to cope with the increased demand for PPE fabrication arose. 3D printing proved to be such a manufacturing technique since its working principles make it an ideal technology for local, decentralized production of PPEs meeting the local demands. While considered to be more environmentally friendly than conventional fabrication techniques and aligning well with the principles of sustainability and circular economy, 3D printing can produce waste as the result of potential failed prints and material used for the fabrication of support structures. This paper describes the case of utilizing pre-existing FDM 3D printing equipment in an academic facility for the production of PPEs (face shields) and their distribution according to local demands. The plastic wastes produced were forwarded to a recycling process that led to their conversion to 3D filament that would be returned to the academic facility as raw material for future 3D printing operations. The followed procedure minimized 3D printing waste and led to a zero-waste fabrication case that was initiated in a pandemic for a greater-good cause (production of COVID-19 fighting PPEs) while assimilating the values of sustainability and circular economy. Graphical abstract

Suggested Citation

  • Antreas Kantaros & Nikolaos Laskaris & Dimitrios Piromalis & Theodore Ganetsos, 2021. "Manufacturing Zero-Waste COVID-19 Personal Protection Equipment: a Case Study of Utilizing 3D Printing While Employing Waste Material Recycling," Circular Economy and Sustainability, Springer, vol. 1(3), pages 851-869, November.
    • Handle: RePEc:spr:circec:v:1:y:2021:i:3:d:10.1007_s43615-021-00047-8
    DOI: 10.1007/s43615-021-00047-8
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s43615-021-00047-8
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s43615-021-00047-8?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Despeisse, M. & Baumers, M. & Brown, P. & Charnley, F. & Ford, S.J. & Garmulewicz, A. & Knowles, S. & Minshall, T.H.W. & Mortara, L. & Reed-Tsochas, F.P. & Rowley, J., 2017. "Unlocking value for a circular economy through 3D printing: A research agenda," Technological Forecasting and Social Change, Elsevier, vol. 115(C), pages 75-84.
    2. Markku Anttonen & Minna Lammi & Juri Mykkänen & Petteri Repo, 2018. "Circular Economy in the Triple Helix of Innovation Systems," Sustainability, MDPI, vol. 10(8), pages 1-14, July.
    3. Chris Turner & Mariale Moreno & Luigi Mondini & Konstantinos Salonitis & Fiona Charnley & Ashutosh Tiwari & Windo Hutabarat, 2019. "Sustainable Production in a Circular Economy: A Business Model for Re-Distributed Manufacturing," Sustainability, MDPI, vol. 11(16), pages 1-19, August.
    4. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    5. Lucia Corsini & James Moultrie, 2019. "Design for Social Sustainability: Using Digital Fabrication in the Humanitarian and Development Sector," Sustainability, MDPI, vol. 11(13), pages 1-20, June.
    6. Nectarios Vidakis & Markos Petousis & Athena Maniadi & Emmanuel Koudoumas & Achilles Vairis & John Kechagias, 2020. "Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes," Sustainability, MDPI, vol. 12(9), pages 1-15, April.
    7. Korhonen, Jouni & Honkasalo, Antero & Seppälä, Jyri, 2018. "Circular Economy: The Concept and its Limitations," Ecological Economics, Elsevier, vol. 143(C), pages 37-46.
    8. Singh, Sunpreet & Prakash, Chander & Ramakrishna, Seeram, 2020. "Three-dimensional printing in the fight against novel virus COVID-19: Technology helping society during an infectious disease pandemic," Technology in Society, Elsevier, vol. 62(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shaik Anwar Ahamed Nabeela Nasreen & Subramanian Sundarrajan & Syed Abdulrahim Syed Nizar & He Wei & Dong Xuecheng & Seeram Ramakrishna, 2022. "Pyrolysis, Microwave, Chemical and Biodegradation Methodology in Recycling of Plastic Waste: a Circular Economy Concept," Circular Economy and Sustainability, Springer, vol. 2(2), pages 609-632, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    2. Kolade, Oluwaseun & Adegbile, Abiodun & Sarpong, David, 2022. "Can university-industry-government collaborations drive a 3D printing revolution in Africa? A triple helix model of technological leapfrogging in additive manufacturing," Technology in Society, Elsevier, vol. 69(C).
    3. Inês Ribeiro & Florinda Matos & Celeste Jacinto & Hafiz Salman & Gonçalo Cardeal & Helena Carvalho & Radu Godina & Paulo Peças, 2020. "Framework for Life Cycle Sustainability Assessment of Additive Manufacturing," Sustainability, MDPI, vol. 12(3), pages 1-22, January.
    4. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    5. Inês A. Ferreira & Radu Godina & Helena Carvalho, 2020. "Waste Valorization through Additive Manufacturing in an Industrial Symbiosis Setting," Sustainability, MDPI, vol. 13(1), pages 1-21, December.
    6. Jaya Priyadarshini & Rajesh Kr Singh & Ruchi Mishra & Surajit Bag, 2022. "Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach," Operations Management Research, Springer, vol. 15(1), pages 567-588, June.
    7. Maresch, Daniela & Gartner, Johannes, 2020. "Make disruptive technological change happen - The case of additive manufacturing," Technological Forecasting and Social Change, Elsevier, vol. 155(C).
    8. Qinglan Liu & Adriana Hofmann Trevisan & Miying Yang & Janaina Mascarenhas, 2022. "A framework of digital technologies for the circular economy: Digital functions and mechanisms," Business Strategy and the Environment, Wiley Blackwell, vol. 31(5), pages 2171-2192, July.
    9. Mónica Duque-Acevedo & Luis Jesús Belmonte-Ureña & Natalia Yakovleva & Francisco Camacho-Ferre, 2020. "Analysis of the Circular Economic Production Models and Their Approach in Agriculture and Agricultural Waste Biomass Management," IJERPH, MDPI, vol. 17(24), pages 1-32, December.
    10. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    11. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    12. Huynh Evertsen, Phuc & Rasmussen, Einar & Nenadic, Oleg, 2022. "Commercializing circular economy innovations: A taxonomy of academic spin-offs," Technological Forecasting and Social Change, Elsevier, vol. 185(C).
    13. Annika Wiecek & Daniel Wentzel & Aras Erkin, 2020. "Just print it! The effects of self-printing a product on consumers’ product evaluations and perceived ownership," Journal of the Academy of Marketing Science, Springer, vol. 48(4), pages 795-811, July.
    14. Rayna, Thierry & Striukova, Ludmila, 2021. "Assessing the effect of 3D printing technologies on entrepreneurship: An exploratory study," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    15. Bauwens, Thomas & Hekkert, Marko & Kirchherr, Julian, 2020. "Circular futures: What Will They Look Like?," Ecological Economics, Elsevier, vol. 175(C).
    16. Patrick Holzmann & Erich J. Schwarz & David B. Audretsch, 2020. "Understanding the determinants of novel technology adoption among teachers: the case of 3D printing," The Journal of Technology Transfer, Springer, vol. 45(1), pages 259-275, February.
    17. Yeh, Ching-Chiang & Chen, Yi-Fan, 2018. "Critical success factors for adoption of 3D printing," Technological Forecasting and Social Change, Elsevier, vol. 132(C), pages 209-216.
    18. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    19. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    20. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:circec:v:1:y:2021:i:3:d:10.1007_s43615-021-00047-8. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.