IDEAS home Printed from https://ideas.repec.org/a/nat/natcom/v6y2015i1d10.1038_ncomms9643.html
   My bibliography  Save this article

Multimaterial magnetically assisted 3D printing of composite materials

Author

Listed:
  • Dimitri Kokkinis

    (Complex Materials, ETH Zürich)

  • Manuel Schaffner

    (Complex Materials, ETH Zürich)

  • André R. Studart

    (Complex Materials, ETH Zürich)

Abstract

3D printing has become commonplace for the manufacturing of objects with unusual geometries. Recent developments that enabled printing of multiple materials indicate that the technology can potentially offer a much wider design space beyond unusual shaping. Here we show that a new dimension in this design space can be exploited through the control of the orientation of anisotropic particles used as building blocks during a direct ink-writing process. Particle orientation control is demonstrated by applying low magnetic fields on deposited inks pre-loaded with magnetized stiff platelets. Multimaterial dispensers and a two-component mixing unit provide additional control over the local composition of the printed material. The five-dimensional design space covered by the proposed multimaterial magnetically assisted 3D printing platform (MM-3D printing) opens the way towards the manufacturing of functional heterogeneous materials with exquisite microstructural features thus far only accessible by biological materials grown in nature.

Suggested Citation

  • Dimitri Kokkinis & Manuel Schaffner & André R. Studart, 2015. "Multimaterial magnetically assisted 3D printing of composite materials," Nature Communications, Nature, vol. 6(1), pages 1-10, December.
  • Handle: RePEc:nat:natcom:v:6:y:2015:i:1:d:10.1038_ncomms9643
    DOI: 10.1038/ncomms9643
    as

    Download full text from publisher

    File URL: https://www.nature.com/articles/ncomms9643
    File Function: Abstract
    Download Restriction: no

    File URL: https://libkey.io/10.1038/ncomms9643?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Siwon Yu & Seunggyu Park & Kang Taek Lee & Jun Yeon Hwang & Soon Hyung Hong & Thomas James Marrow, 2024. "On the crack resistance and damage tolerance of 3D-printed nature-inspired hierarchical composite architecture," Nature Communications, Nature, vol. 15(1), pages 1-14, December.
    2. Sang-Joon Ahn & Howon Lee & Kyu-Jin Cho, 2024. "3D printing with a 3D printed digital material filament for programming functional gradients," Nature Communications, Nature, vol. 15(1), pages 1-11, December.
    3. Sajjad Rahmani Dabbagh & Misagh Rezapour Sarabi & Mehmet Tugrul Birtek & Siamak Seyfi & Metin Sitti & Savas Tasoglu, 2022. "3D-printed microrobots from design to translation," Nature Communications, Nature, vol. 13(1), pages 1-24, December.
    4. K. S. Vikrant & G. R. Jayanth, 2022. "Diamagnetically levitated nanopositioners with large-range and multiple degrees of freedom," Nature Communications, Nature, vol. 13(1), pages 1-11, December.
    5. Ahmet F. Demirörs & Erik Poloni & Maddalena Chiesa & Fabio L. Bargardi & Marco R. Binelli & Wilhelm Woigk & Lucas D. C. Castro & Nicole Kleger & Fergal B. Coulter & Alba Sicher & Henning Galinski & Fr, 2022. "Three-dimensional printing of photonic colloidal glasses into objects with isotropic structural color," Nature Communications, Nature, vol. 13(1), pages 1-9, December.
    6. Mingyang Zhang & Ning Zhao & Qin Yu & Zengqian Liu & Ruitao Qu & Jian Zhang & Shujun Li & Dechun Ren & Filippo Berto & Zhefeng Zhang & Robert O. Ritchie, 2022. "On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures," Nature Communications, Nature, vol. 13(1), pages 1-13, December.
    7. Wing Chung Liu & Vanessa Hui Yin Chou & Rohit Pratyush Behera & Hortense Le Ferrand, 2022. "Magnetically assisted drop-on-demand 3D printing of microstructured multimaterial composites," Nature Communications, Nature, vol. 13(1), pages 1-12, December.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:nat:natcom:v:6:y:2015:i:1:d:10.1038_ncomms9643. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.nature.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.