IDEAS home Printed from https://ideas.repec.org/a/hin/complx/7849670.html
   My bibliography  Save this article

The Influence of 3D Printing on Global Container Multimodal Transport System

Author

Listed:
  • Zhen Chen

Abstract

Container multimodal transport system was an important promoter of postwar globalization. But in the future, part of global manufacturing may change from centralized to distributed due to 3D printing. To evaluate its impact, this research established a system dynamics model of sneakers supply chain firstly. The modeling showed that the total demand of international transport would decline after the application of 3D printing. For consumer country, the return of manufacturing would increase its container business. And that of producer country would reduce correspondingly. But for resource country, its resource exports would decline, while its container business may grow for the local processing of printing filaments. Secondly, the evaluations based on the data of Guangzhou port suggest that the 3D printing of sneakers was not enough to subvert the existing system. It would be broken only after the 3D printing of electrical products. By then, more manufacturing activities would transfer to the end of supply chain. On the other hand, producer country may actively respond to maintain its advantage in incumbent industrial pattern, such as Belt and Road initiative proposed by China. Deglobalization, caused by 3D printing, and globalization strengthening, caused by trade cooperation, will affect this system simultaneously.

Suggested Citation

  • Zhen Chen, 2017. "The Influence of 3D Printing on Global Container Multimodal Transport System," Complexity, Hindawi, vol. 2017, pages 1-19, November.
    • Handle: RePEc:hin:complx:7849670
    DOI: 10.1155/2017/7849670
    as

    Download full text from publisher

    File URL: http://downloads.hindawi.com/journals/8503/2017/7849670.pdf
    Download Restriction: no
    File URL: http://downloads.hindawi.com/journals/8503/2017/7849670.xml
    Download Restriction: no
    File URL: https://libkey.io/10.1155/2017/7849670?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Bogers, Marcel & Hadar, Ronen & Bilberg, Arne, 2016. "Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 225-239.
    2. Gurtner, Sebastian & Soyez, Katja, 2016. "How to catch the generation Y: Identifying consumers of ecological innovations among youngsters," Technological Forecasting and Social Change, Elsevier, vol. 106(C), pages 101-107.
    3. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    4. Milan Zeleny, 2012. "High Technology And Barriers To Innovation: From Globalization To Relocalization," International Journal of Information Technology & Decision Making (IJITDM), World Scientific Publishing Co. Pte. Ltd., vol. 11(02), pages 441-456.
    5. André O Laplume & Bent Petersen & Joshua M Pearce, 2016. "Global value chains from a 3D printing perspective," Journal of International Business Studies, Palgrave Macmillan;Academy of International Business, vol. 47(5), pages 595-609, June.
    6. Marc Levinson, 2008. "Introduction to The Box: How the Shipping Container Made the World Smaller and the World Economy Bigger," Introductory Chapters, in: The Box: How the Shipping Container Made the World Smaller and the World Economy Bigger, Princeton University Press.
    7. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Claudio Ferrari & Alessio Tei, 2020. "Effects of BRI strategy on Mediterranean shipping transport," Journal of Shipping and Trade, Springer, vol. 5(1), pages 1-18, December.
    2. Friedrich, Anne & Lange, Anne & Elbert, Ralf, 2022. "How additive manufacturing drives business model change: The perspective of logistics service providers," International Journal of Production Economics, Elsevier, vol. 249(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Martin Hannibal, 2020. "The influence of additive manufacturing on early internationalization: considerations into potential avenues of IE research," Journal of International Entrepreneurship, Springer, vol. 18(4), pages 473-491, December.
    2. Büchi, Giacomo & Cugno, Monica & Castagnoli, Rebecca, 2020. "Smart factory performance and Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 150(C).
    3. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    4. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.
    5. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    6. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    7. Naghshineh, Bardia & Ribeiro, André & Jacinto, Celeste & Carvalho, Helena, 2021. "Social impacts of additive manufacturing: A stakeholder-driven framework," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    8. Jiang, Ruth & Kleer, Robin & Piller, Frank T., 2017. "Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030," Technological Forecasting and Social Change, Elsevier, vol. 117(C), pages 84-97.
    9. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    10. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    11. Friedrich, Anne & Lange, Anne & Elbert, Ralf, 2022. "How additive manufacturing drives business model change: The perspective of logistics service providers," International Journal of Production Economics, Elsevier, vol. 249(C).
    12. Hannibal, Martin & Knight, Gary, 2018. "Additive manufacturing and the global factory: Disruptive technologies and the location of international business," International Business Review, Elsevier, vol. 27(6), pages 1116-1127.
    13. Ponzoa, José M. & Gómez, Andrés & Villaverde, Silvia & Díaz, Vicente, 2021. "Technologically empowered? perception and acceptance of AR glasses and 3D printers in new generations of consumers," Technological Forecasting and Social Change, Elsevier, vol. 173(C).
    14. Victor Verboeket & Harold Krikke, 2019. "Additive Manufacturing: A Game Changer in Supply Chain Design," Logistics, MDPI, vol. 3(2), pages 1-27, April.
    15. Li, Wei & Sun, Hui & Tong, Meng & Mustafee, Navonil & Koh, Lenny, 2024. "Customizing customization in a 3D printing-enabled hybrid manufacturing supply chain," International Journal of Production Economics, Elsevier, vol. 268(C).
    16. Despeisse, M. & Baumers, M. & Brown, P. & Charnley, F. & Ford, S.J. & Garmulewicz, A. & Knowles, S. & Minshall, T.H.W. & Mortara, L. & Reed-Tsochas, F.P. & Rowley, J., 2017. "Unlocking value for a circular economy through 3D printing: A research agenda," Technological Forecasting and Social Change, Elsevier, vol. 115(C), pages 75-84.
    17. Ayman Altuwaim & Abdulelah AlTasan & Abdulmohsen Almohsen, 2023. "Success Criteria for Applying Construction Technologies in Residential Projects," Sustainability, MDPI, vol. 15(8), pages 1-15, April.
    18. Florinda Matos & Radu Godina & Celeste Jacinto & Helena Carvalho & Inês Ribeiro & Paulo Peças, 2019. "Additive Manufacturing: Exploring the Social Changes and Impacts," Sustainability, MDPI, vol. 11(14), pages 1-18, July.
    19. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    20. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:hin:complx:7849670. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Mohamed Abdelhakeem (email available below). General contact details of provider: https://www.hindawi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.