IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v16y2024i17p7813-d1473623.html
   My bibliography  Save this article

Impact of Spatial Layout Design on Energy Consumption of Ice Rinks in Cold Regions

Author

Listed:
  • Jiayue Yu

    (School of Architecture and Design, Harbin Institute of Technology, Harbin 150001, China
    Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology, Ministry of Industry and Information Technology, Harbin 150001, China)

  • Xinyue Ma

    (The Architectural Design and Research Institute of HIT Co., Ltd., Harbin 150090, China)

  • Teng Fei

    (School of Architecture and Design, Harbin Institute of Technology, Harbin 150001, China
    Key Laboratory of Cold Region Urban and Rural Human Settlement Environment Science and Technology, Ministry of Industry and Information Technology, Harbin 150001, China
    Complex Environment Architecture Research Institute, Harbin Institute of Technology, Harbin 150001, China)

Abstract

The differentiated physical environment requirements within the internal space of ice rinks in cold regions result in a complex heat exchange process, which becomes the primary cause of high energy consumption. Therefore, analyzing the impact mechanisms of spatial layout parameters on the energy consumption of ice rinks is crucial during the early design stages. This study employed the Delphi method to identify the key parameters affecting the total energy consumption of ice rinks. It conducted single-factor experiments using building performance simulations to quantify the relationship between each layout parameter and the energy consumption. Based on the single-factor experiment results, orthogonal experiments were conducted to develop an energy-efficient spatial layout combination. The study indicates that the height-to-width ratio and the mixed area width are the most significant parameters. By adjusting the values of these parameters, the total energy consumption can be reduced by approximately 18% to 31%. The spatial layout strategy for ice rinks in cold regions proposed in this study will help architects make more effective decisions during the early design stages.

Suggested Citation

  • Jiayue Yu & Xinyue Ma & Teng Fei, 2024. "Impact of Spatial Layout Design on Energy Consumption of Ice Rinks in Cold Regions," Sustainability, MDPI, vol. 16(17), pages 1-19, September.
    • Handle: RePEc:gam:jsusta:v:16:y:2024:i:17:p:7813-:d:1473623
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/16/17/7813/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/16/17/7813/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Méndez Echenagucia, Tomás & Capozzoli, Alfonso & Cascone, Ylenia & Sassone, Mario, 2015. "The early design stage of a building envelope: Multi-objective search through heating, cooling and lighting energy performance analysis," Applied Energy, Elsevier, vol. 154(C), pages 577-591.
    2. Gu, Meng & Guo, Qi & Lu, Shiliang, 2022. "Feasibility analysis of energy-saving potential of the underground ice rink using spectrum splitting sunshade technology," Renewable Energy, Elsevier, vol. 191(C), pages 571-579.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Giacomo Chiesa & Andrea Acquaviva & Mario Grosso & Lorenzo Bottaccioli & Maurizio Floridia & Edoardo Pristeri & Edoardo Maria Sanna, 2019. "Parametric Optimization of Window-to-Wall Ratio for Passive Buildings Adopting A Scripting Methodology to Dynamic-Energy Simulation," Sustainability, MDPI, vol. 11(11), pages 1-30, May.
    2. Saurbayeva, Assemgul & Memon, Shazim Ali & Kim, Jong, 2023. "Integrated multi-stage sensitivity analysis and multi-objective optimization approach for PCM integrated residential buildings in different climate zones," Energy, Elsevier, vol. 278(PB).
    3. Ascione, Fabrizio & De Masi, Rosa Francesca & de Rossi, Filippo & Ruggiero, Silvia & Vanoli, Giuseppe Peter, 2016. "Optimization of building envelope design for nZEBs in Mediterranean climate: Performance analysis of residential case study," Applied Energy, Elsevier, vol. 183(C), pages 938-957.
    4. Fernandes, Marco S. & Rodrigues, Eugénio & Gaspar, Adélio Rodrigues & Costa, José J. & Gomes, Álvaro, 2019. "The impact of thermal transmittance variation on building design in the Mediterranean region," Applied Energy, Elsevier, vol. 239(C), pages 581-597.
    5. Taveres-Cachat, Ellika & Lobaccaro, Gabriele & Goia, Francesco & Chaudhary, Gaurav, 2019. "A methodology to improve the performance of PV integrated shading devices using multi-objective optimization," Applied Energy, Elsevier, vol. 247(C), pages 731-744.
    6. Lin, Yu-Hao & Tsai, Kang-Ting & Lin, Min-Der & Yang, Ming-Der, 2016. "Design optimization of office building envelope configurations for energy conservation," Applied Energy, Elsevier, vol. 171(C), pages 336-346.
    7. García Kerdan, Iván & Raslan, Rokia & Ruyssevelt, Paul & Morillón Gálvez, David, 2017. "A comparison of an energy/economic-based against an exergoeconomic-based multi-objective optimisation for low carbon building energy design," Energy, Elsevier, vol. 128(C), pages 244-263.
    8. Nayara R. M. Sakiyama & Joyce C. Carlo & Leonardo Mazzaferro & Harald Garrecht, 2021. "Building Optimization through a Parametric Design Platform: Using Sensitivity Analysis to Improve a Radial-Based Algorithm Performance," Sustainability, MDPI, vol. 13(10), pages 1-25, May.
    9. Dušan Katunský & Marián Vertaľ & Erika Dolníková & Silvia Zozuláková & Kristián Hutkai & Zuzana Dická, 2022. "Mutual Interaction of Daylight and Overheating in the Attic Space in Summer Time," Sustainability, MDPI, vol. 14(23), pages 1-25, November.
    10. Lešnik, Maja & Kravanja, Stojan & Premrov, Miroslav & Žegarac Leskovar, Vesna, 2020. "Optimal design of timber-glass upgrade modules for vertical building extension from the viewpoints of energy efficiency and visual comfort," Applied Energy, Elsevier, vol. 270(C).
    11. Gholami Rostam, Mehdi & Abbasi, Alireza, 2023. "Dynamic climate-adaptive design: A key to realizing future-proof energy efficiency in building sector," Applied Energy, Elsevier, vol. 341(C).
    12. Halawa, Edward & Ghaffarianhoseini, Amirhosein & Ghaffarianhoseini, Ali & Trombley, Jeremy & Hassan, Norhaslina & Baig, Mirza & Yusoff, Safiah Yusmah & Azzam Ismail, Muhammad, 2018. "A review on energy conscious designs of building façades in hot and humid climates: Lessons for (and from) Kuala Lumpur and Darwin," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2147-2161.
    13. Ascione, Fabrizio & Bianco, Nicola & Mauro, Gerardo Maria & Vanoli, Giuseppe Peter, 2019. "A new comprehensive framework for the multi-objective optimization of building energy design: Harlequin," Applied Energy, Elsevier, vol. 241(C), pages 331-361.
    14. Seyedeh Farzaneh Mousavi Motlagh & Ali Sohani & Mohammad Djavad Saghafi & Hoseyn Sayyaadi & Benedetto Nastasi, 2021. "The Road to Developing Economically Feasible Plans for Green, Comfortable and Energy Efficient Buildings," Energies, MDPI, vol. 14(3), pages 1-30, January.
    15. Favoino, Fabio & Fiorito, Francesco & Cannavale, Alessandro & Ranzi, Gianluca & Overend, Mauro, 2016. "Optimal control and performance of photovoltachromic switchable glazing for building integration in temperate climates," Applied Energy, Elsevier, vol. 178(C), pages 943-961.
    16. Delgarm, N. & Sajadi, B. & Kowsary, F. & Delgarm, S., 2016. "Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)," Applied Energy, Elsevier, vol. 170(C), pages 293-303.
    17. Muhammad Usman & Georg Frey, 2021. "Multi-Objective Techno-Economic Optimization of Design Parameters for Residential Buildings in Different Climate Zones," Sustainability, MDPI, vol. 14(1), pages 1-30, December.
    18. Amna Shibeika & Maatouk Khoukhi & Omar Al Khatib & Nouf Alzahmi & Shamma Tahnoon & Maryam Al Dhahri & Nouf Alshamsi, 2021. "Integrated Design Process for High-Performance Buildings; a Case Study from Dubai," Sustainability, MDPI, vol. 13(15), pages 1-18, July.
    19. Abdo Abdullah Ahmed Gassar & Choongwan Koo & Tae Wan Kim & Seung Hyun Cha, 2021. "Performance Optimization Studies on Heating, Cooling and Lighting Energy Systems of Buildings during the Design Stage: A Review," Sustainability, MDPI, vol. 13(17), pages 1-47, September.
    20. Li, Hong Xian & Li, Yan & Jiang, Boya & Zhang, Limao & Wu, Xianguo & Lin, Jingyi, 2020. "Energy performance optimisation of building envelope retrofit through integrated orthogonal arrays with data envelopment analysis," Renewable Energy, Elsevier, vol. 149(C), pages 1414-1423.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:17:p:7813-:d:1473623. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.