IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v16y2024i17p7655-d1470650.html
   My bibliography  Save this article

The Influence of Structural Parameters on the Ultimate Strength Capacity of a Designed Vertical Axis Turbine Blade for Ocean Current Power Generators

Author

Listed:
  • Rasgianti

    (Department of Ocean Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia
    PT PLN (Persero) Research Institute, Jakarta 12760, Indonesia)

  • Mukhtasor

    (Department of Ocean Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia)

  • Dendy Satrio

    (Department of Ocean Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111, Indonesia)

Abstract

An ocean current power generator is a power plant that uses kinetic energy from ocean currents to generate electricity. Considering that the blade is the component that receives the biggest load from seawater currents, its structural design should be strong enough to sustain the applied load. Therefore, this research seeks a suitable design and material for turbine blades using the finite element method (FEM). A NACA 0021 blade with a total length of 3600 mm is used for the base geometry. A parametric study was conducted by varying the spacing between the supports, the pitch angle, the material, and the frame model. Considering a high load, the suitable amount of space between the stiffeners was 2200 mm. It was found that a pitch angle variation between −20° and +20° did not significantly affect the strength of the blade structure. The frame geometry variation caused the rigidity and cross-section area of the blade to differ. Therefore, web-shaped or bar-shaped frames are preferable because they have optimal maximum load-to-weight ratios. The material variation analysis resulted in CFRP material being chosen because it had a high maximum load/weight ratio and a high maximum stress.

Suggested Citation

  • Rasgianti & Mukhtasor & Dendy Satrio, 2024. "The Influence of Structural Parameters on the Ultimate Strength Capacity of a Designed Vertical Axis Turbine Blade for Ocean Current Power Generators," Sustainability, MDPI, vol. 16(17), pages 1-24, September.
  • Handle: RePEc:gam:jsusta:v:16:y:2024:i:17:p:7655-:d:1470650
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/16/17/7655/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/16/17/7655/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Patel, Vimal & Eldho, T.I. & Prabhu, S.V., 2019. "Performance enhancement of a Darrieus hydrokinetic turbine with the blocking of a specific flow region for optimum use of hydropower," Renewable Energy, Elsevier, vol. 135(C), pages 1144-1156.
    2. Zeiner-Gundersen, Dag Herman, 2015. "A novel flexible foil vertical axis turbine for river, ocean, and tidal applications," Applied Energy, Elsevier, vol. 151(C), pages 60-66.
    3. Ardaneh, Fatemeh & Abdolahifar, Abolfazl & Karimian, S.M.H., 2022. "Numerical analysis of the pitch angle effect on the performance improvement and flow characteristics of the 3-PB Darrieus vertical axis wind turbine," Energy, Elsevier, vol. 239(PD).
    4. Mohammadreza Asadbeigi & Farzad Ghafoorian & Mehdi Mehrpooya & Sahel Chegini & Azad Jarrahian, 2023. "A 3D Study of the Darrieus Wind Turbine with Auxiliary Blades and Economic Analysis Based on an Optimal Design from a Parametric Investigation," Sustainability, MDPI, vol. 15(5), pages 1-31, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chongfei Sun & Zirong Luo & Jianzhong Shang & Zhongyue Lu & Yiming Zhu & Guoheng Wu, 2018. "Design and Numerical Analysis of a Novel Counter-Rotating Self-Adaptable Wave Energy Converter Based on CFD Technology," Energies, MDPI, vol. 11(4), pages 1-21, March.
    2. Hoseinzadeh, Siamak & Astiaso Garcia, Davide & Huang, Lizhen, 2023. "Grid-connected renewable energy systems flexibility in Norway islands’ Decarbonization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    3. Rahmatian, Mohammad Ali & Hashemi Tari, Pooyan & Mojaddam, Mohammad & Majidi, Sahand, 2022. "Numerical and experimental study of the ducted diffuser effect on improving the aerodynamic performance of a micro horizontal axis wind turbine," Energy, Elsevier, vol. 245(C).
    4. Shayan Farajyar & Farzad Ghafoorian & Mehdi Mehrpooya & Mohammadreza Asadbeigi, 2023. "CFD Investigation and Optimization on the Aerodynamic Performance of a Savonius Vertical Axis Wind Turbine and Its Installation in a Hybrid Power Supply System: A Case Study in Iran," Sustainability, MDPI, vol. 15(6), pages 1-31, March.
    5. Kamal, Md. Mustafa & Saini, R.P., 2022. "A numerical investigation on the influence of savonius blade helicity on the performance characteristics of hybrid cross-flow hydrokinetic turbine," Renewable Energy, Elsevier, vol. 190(C), pages 788-804.
    6. Paul Brousseau & Mustapha Benaouicha & Sylvain Guillou, 2021. "Hydrodynamic Efficiency Analysis of a Flexible Hydrofoil Oscillating in a Moderate Reynolds Number Fluid Flow," Energies, MDPI, vol. 14(14), pages 1-19, July.
    7. Wen, Binrong & Tian, Xinliang & Dong, Xingjian & Peng, Zhike & Zhang, Wenming & Wei, Kexiang, 2019. "A numerical study on the angle of attack to the blade of a horizontal-axis offshore floating wind turbine under static and dynamic yawed conditions," Energy, Elsevier, vol. 168(C), pages 1138-1156.
    8. Yuan, Chenheng & Lu, Jiangchuan & Li, Shilei, 2023. "Thermoelectric coupling effect of secondary injection on gasoline fuel spray and mixing of a free vibration combustion alternator," Energy, Elsevier, vol. 281(C).
    9. Changcheng Li & Haoran Li & Hao Yue & Jinfeng Lv & Jian Zhang, 2024. "Flexibility Value of Multimodal Hydrogen Energy Utilization in Electric–Hydrogen–Thermal Systems," Sustainability, MDPI, vol. 16(12), pages 1-25, June.
    10. Guanghao Li & Guoying Wu & Lei Tan & Honggang Fan, 2023. "A Review: Design and Optimization Approaches of the Darrieus Water Turbine," Sustainability, MDPI, vol. 15(14), pages 1-28, July.
    11. Stefan Hoerner & Iring Kösters & Laure Vignal & Olivier Cleynen & Shokoofeh Abbaszadeh & Thierry Maître & Dominique Thévenin, 2021. "Cross-Flow Tidal Turbines with Highly Flexible Blades—Experimental Flow Field Investigations at Strong Fluid–Structure Interactions," Energies, MDPI, vol. 14(4), pages 1-17, February.
    12. Acarer, Sercan, 2020. "Peak lift-to-drag ratio enhancement of the DU12W262 airfoil by passive flow control and its impact on horizontal and vertical axis wind turbines," Energy, Elsevier, vol. 201(C).
    13. Mohamed-Larbi Kara-Mostefa & Ludovic Chatellier & Lionel Thomas, 2023. "Effect of Vertical Confinement and Blade Flexibility on Cross-Flow Turbines," Energies, MDPI, vol. 16(9), pages 1-15, April.
    14. Lu, Shibao & Ye, Weiwei & Xue, Yangang & Tang, Yao & Guo, Min, 2020. "Dynamic feature information extraction using the special empirical mode decomposition entropy value and index energy," Energy, Elsevier, vol. 193(C).
    15. Mohamed, M.H., 2019. "Criticism study of J-Shaped darrieus wind turbine: Performance evaluation and noise generation assessment," Energy, Elsevier, vol. 177(C), pages 367-385.
    16. Tong, Guoqiang & Yang, Shengbing & Li, Yan & Feng, Fang, 2023. "Effects of blade tip flow on aerodynamic characteristics of straight-bladed vertical axis wind turbines," Energy, Elsevier, vol. 283(C).
    17. Abdolahifar, Abolfazl & Karimian, S.M.H., 2022. "A comprehensive three-dimensional study on Darrieus vertical axis wind turbine with slotted blade to reduce flow separation," Energy, Elsevier, vol. 248(C).
    18. Rezaeiha, Abdolrahim & Kalkman, Ivo & Blocken, Bert, 2017. "Effect of pitch angle on power performance and aerodynamics of a vertical axis wind turbine," Applied Energy, Elsevier, vol. 197(C), pages 132-150.
    19. Ma, Yong & Zhu, Yuanyao & Zhang, Aiming & Hu, Chao & Liu, Sen & Li, Zhengyu, 2022. "Hydrodynamic performance of vertical axis hydrokinetic turbine based on Taguchi method," Renewable Energy, Elsevier, vol. 186(C), pages 573-584.
    20. Yang, Min-Hsiung & Huang, Guan-Ming & Yeh, Rong-Hua, 2016. "Performance investigation of an innovative vertical axis turbine consisting of deflectable blades," Applied Energy, Elsevier, vol. 179(C), pages 875-887.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:17:p:7655-:d:1470650. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.