IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v16y2024i14p5876-d1432233.html
   My bibliography  Save this article

Effect of Surface Area, Particle Size and Acid Washing on the Quality of Activated Carbon Derived from Lower Rank Coal by KOH Activation

Author

Listed:
  • William Spencer

    (Centre for Water Energy and Waste, Harry Butler Institute, College of Science, Health, Engineering and Education, Murdoch University, 90 South Street, Murdoch, Perth, WA 6150, Australia)

  • Don Ibana

    (Centre for Water Energy and Waste, Harry Butler Institute, College of Science, Health, Engineering and Education, Murdoch University, 90 South Street, Murdoch, Perth, WA 6150, Australia)

  • Pritam Singh

    (Centre for Water Energy and Waste, Harry Butler Institute, College of Science, Health, Engineering and Education, Murdoch University, 90 South Street, Murdoch, Perth, WA 6150, Australia)

  • Aleksandar N. Nikoloski

    (Centre for Water Energy and Waste, Harry Butler Institute, College of Science, Health, Engineering and Education, Murdoch University, 90 South Street, Murdoch, Perth, WA 6150, Australia)

Abstract

The use of coal-derived activated carbon (AC) for water treatment applications demands more sustainable production methods, with chemical activation emerging as a promising alternative to thermal activation due to its higher AC quality, lower carbon burn-off, and higher yield. The study explored the effect of surface area, particle size and acid washing on the quality of AC derived from three seams of lower-rank Collie coal under the same activation conditions with potassium hydroxide (KOH). The quality of AC was determined by surface area and iodine number. The study demonstrates that Collie coal, suitable for AC production via KOH activation, yielded iodine numbers of 640 and 900 mg/g, with yields of 53 and 57 wt.%. Particle size influenced AC yield, with finer particle sizes yielding AC at 57–59 wt.%, whereas coarser ones yielded around 58–65 wt.%. SEM analysis shows the well-developed porous structure in Collie coal-derived activated carbons, with cleaner particles after acid washing. A positive correlation exists between coal surface area and AC iodine numbers, with higher values in coal samples correlating to increased iodine numbers in resulting AC. The regression model’s predicted values yield a coefficient of determination (R²) of 0.99.

Suggested Citation

  • William Spencer & Don Ibana & Pritam Singh & Aleksandar N. Nikoloski, 2024. "Effect of Surface Area, Particle Size and Acid Washing on the Quality of Activated Carbon Derived from Lower Rank Coal by KOH Activation," Sustainability, MDPI, vol. 16(14), pages 1-19, July.
  • Handle: RePEc:gam:jsusta:v:16:y:2024:i:14:p:5876-:d:1432233
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/16/14/5876/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/16/14/5876/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Bilgen, Selçuk & Kaygusuz, Kamil, 2008. "The calculation of the chemical exergies of coal-based fuels by using the higher heating values," Applied Energy, Elsevier, vol. 85(8), pages 776-785, August.
    2. Md. Matiar Rahman & Abu Zar Shafiullah & Animesh Pal & Md. Amirul Islam & Israt Jahan & Bidyut Baran Saha, 2021. "Study on Optimum IUPAC Adsorption Isotherm Models Employing Sensitivity of Parameters for Rigorous Adsorption System Performance Evaluation," Energies, MDPI, vol. 14(22), pages 1-20, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Francis Chinweuba Eboh & Peter Ahlström & Tobias Richards, 2017. "Exergy Analysis of Solid Fuel-Fired Heat and Power Plants: A Review," Energies, MDPI, vol. 10(2), pages 1-29, February.
    2. Gao, Jintong & Zhang, Qi & Wang, Xiaozhuang & Song, Dayong & Liu, Weiqi & Liu, Wenchao, 2018. "Exergy and exergoeconomic analyses with modeling for CO2 allocation of coal-fired CHP plants," Energy, Elsevier, vol. 152(C), pages 562-575.
    3. Huang, Youwang & Wang, Haiyong & Zhang, Xinghua & Zhang, Qi & Wang, Chenguang & Ma, Longlong, 2022. "Accurate prediction of chemical exergy of technical lignins for exergy-based assessment on sustainable utilization processes," Energy, Elsevier, vol. 243(C).
    4. Gharagheizi, Farhad & Ilani-Kashkouli, Poorandokht & Mohammadi, Amir H. & Ramjugernath, Deresh, 2014. "A group contribution method for determination of the standard molar chemical exergy of organic compounds," Energy, Elsevier, vol. 70(C), pages 288-297.
    5. Song, Guohui & Xiao, Jun & Zhao, Hao & Shen, Laihong, 2012. "A unified correlation for estimating specific chemical exergy of solid and liquid fuels," Energy, Elsevier, vol. 40(1), pages 164-173.
    6. Gharagheizi, Farhad & Ilani-Kashkouli, Poorandokht & Hedden, Ronald C., 2018. "Standard molar chemical exergy: A new accurate model," Energy, Elsevier, vol. 158(C), pages 924-935.
    7. Piñón-Muñiz, M.I. & Ramos-Sánchez, V.H. & Gutiérrez-Méndez, N. & Pérez-Vega, S.B. & Sacramento-Rivero, J.C. & Vargas-Consuelos, C.I. & Martinez, F.M. & Graeve, O.A. & Orozco-Mena, R.E. & Quintero-Ramo, 2023. "Potential use of Sotol bagasse (Dasylirion spp.) as a new biomass source for liquid biofuels production: Comprehensive characterization and ABE fermentation," Renewable Energy, Elsevier, vol. 212(C), pages 632-643.
    8. Huang, Y.W. & Chen, M.Q. & Li, Y. & Guo, J., 2016. "Modeling of chemical exergy of agricultural biomass using improved general regression neural network," Energy, Elsevier, vol. 114(C), pages 1164-1175.
    9. Bilgen, Selçuk & Keleş, Sedat & Kaygusuz, Kamil, 2012. "Calculation of higher and lower heating values and chemical exergy values of liquid products obtained from pyrolysis of hazelnut cupulae," Energy, Elsevier, vol. 41(1), pages 380-385.
    10. Aysha Al Qayoudi & Sulaiman Al-Zuhair, 2022. "Dynamic Modelling of Enzymatic Hydrolysis of Oil Using Lipase Immobilized on Zeolite," Sustainability, MDPI, vol. 14(14), pages 1-17, July.
    11. Huang, Weijia & Zheng, Danxing & Chen, Xiaohui & Shi, Lin & Dai, Xiaoye & Chen, Youhui & Jing, Xuye, 2020. "Standard thermodynamic properties for the energy grade evaluation of fossil fuels and renewable fuels," Renewable Energy, Elsevier, vol. 147(P1), pages 2160-2170.
    12. Bahadori, Alireza & Vuthaluru, Hari B., 2010. "Estimation of potential savings from reducing unburned combustible losses in coal-fired systems," Applied Energy, Elsevier, vol. 87(12), pages 3792-3799, December.
    13. Do, Truong Xuan & Mujahid, Rana & Lim, Hyun Soo & Kim, Jae-Kon & Lim, Young-Il & Kim, Jaehoon, 2020. "Techno-economic analysis of bio heavy-oil production from sewage sludge using supercritical and subcritical water," Renewable Energy, Elsevier, vol. 151(C), pages 30-42.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:14:p:5876-:d:1432233. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.