IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i6p3565-d522636.html
   My bibliography  Save this article

Criticality and Life-Cycle Assessment of Materials Used in Fuel-Cell and Hydrogen Technologies

Author

Listed:
  • Mitja Mori

    (Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia)

  • Rok Stropnik

    (Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia)

  • Mihael Sekavčnik

    (Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia)

  • Andrej Lotrič

    (Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia)

Abstract

The purpose of this paper is to obtain relevant data on materials that are the most commonly used in fuel-cell and hydrogen technologies. The focus is on polymer-electrolyte-membrane fuel cells, solid-oxide fuel cells, polymer-electrolyte-membrane water electrolysers and alkaline water electrolysers. An innovative, methodological approach was developed for a preliminary material assessment of the four technologies. This methodological approach leads to a more rapid identification of the most influential or critical materials that substantially increase the environmental impact of fuel-cell and hydrogen technologies. The approach also assisted in amassing the life-cycle inventories—the emphasis here is on the solid-oxide fuel-cell technology because it is still in its early development stage and thus has a deficient materials’ database—that were used in a life-cycle assessment for an in-depth material-criticality analysis. All the listed materials—that either are or could potentially be used in these technologies—were analysed to give important information for the fuel-cell and hydrogen industries, the recycling industry, the hydrogen economy, as well as policymakers. The main conclusion from the life-cycle assessment is that the polymer-electrolyte-membrane water electrolysers have the highest environmental impacts; lower impacts are seen in polymer-electrolyte-membrane fuel cells and solid-oxide fuel cells, while the lowest impacts are observed in alkaline water electrolysers. The results of the material assessment are presented together for all the considered materials, but also separately for each observed technology.

Suggested Citation

  • Mitja Mori & Rok Stropnik & Mihael Sekavčnik & Andrej Lotrič, 2021. "Criticality and Life-Cycle Assessment of Materials Used in Fuel-Cell and Hydrogen Technologies," Sustainability, MDPI, vol. 13(6), pages 1-29, March.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:6:p:3565-:d:522636
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/6/3565/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/6/3565/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ho, Jonathan C. & Saw, Ewe-Chai & Lu, Louis Y.Y. & Liu, John S., 2014. "Technological barriers and research trends in fuel cell technologies: A citation network analysis," Technological Forecasting and Social Change, Elsevier, vol. 82(C), pages 66-79.
    2. Blengini, Gian Andrea & Nuss, Philip & Dewulf, Jo & Nita, Viorel & Peirò, Laura Talens & Vidal-Legaz, Beatriz & Latunussa, Cynthia & Mancini, Lucia & Blagoeva, Darina & Pennington, David & Pellegrini,, 2017. "EU methodology for critical raw materials assessment: Policy needs and proposed solutions for incremental improvements," Resources Policy, Elsevier, vol. 53(C), pages 12-19.
    3. Jin, Yanya & Kim, Junbeum & Guillaume, Bertrand, 2016. "Review of critical material studies," Resources, Conservation & Recycling, Elsevier, vol. 113(C), pages 77-87.
    4. Glöser, Simon & Tercero Espinoza, Luis & Gandenberger, Carsten & Faulstich, Martin, 2015. "Raw material criticality in the context of classical risk assessment," Resources Policy, Elsevier, vol. 44(C), pages 35-46.
    5. Mehmeti, Andi & McPhail, Stephen J. & Ulgiati, Sergio, 2018. "Life cycle inventory data and metrics for high-temperature fuel cells: A streamlined decision-support tool and case study application," Energy, Elsevier, vol. 159(C), pages 1195-1205.
    6. Nejc Hodnik & Claudio Baldizzone & George Polymeros & Simon Geiger & Jan-Philipp Grote & Serhiy Cherevko & Andrea Mingers & Aleksandar Zeradjanin & Karl J. J. Mayrhofer, 2016. "Platinum recycling going green via induced surface potential alteration enabling fast and efficient dissolution," Nature Communications, Nature, vol. 7(1), pages 1-6, December.
    7. Sharaf, Omar Z. & Orhan, Mehmet F., 2014. "An overview of fuel cell technology: Fundamentals and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 810-853.
    8. Elmer, Theo & Worall, Mark & Wu, Shenyi & Riffat, Saffa B., 2015. "Fuel cell technology for domestic built environment applications: State of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 913-931.
    9. Daw, Georges, 2017. "Security of mineral resources: A new framework for quantitative assessment of criticality," Resources Policy, Elsevier, vol. 53(C), pages 173-189.
    10. Georges Daw, 2017. "Security of mineral resources: A new framework for quantitative assessment of criticality," Université Paris1 Panthéon-Sorbonne (Post-Print and Working Papers) hal-01591701, HAL.
    11. Goe, Michele & Gaustad, Gabrielle, 2014. "Identifying critical materials for photovoltaics in the US: A multi-metric approach," Applied Energy, Elsevier, vol. 123(C), pages 387-396.
    12. Bach, Vanessa & Finogenova, Natalia & Berger, Markus & Winter, Lisa & Finkbeiner, Matthias, 2017. "Enhancing the assessment of critical resource use at the country level with the SCARCE method – Case study of Germany," Resources Policy, Elsevier, vol. 53(C), pages 283-299.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Annika Tampe & Kristina Höse & Uwe Götze, 2023. "Sustainability-Oriented Assessment of Fuel Cells—A Literature Review," Sustainability, MDPI, vol. 15(19), pages 1-33, September.
    2. Gerhardt-Mörsdorf, Janis & Incer-Valverde, Jimena & Morosuk, Tatiana & Minke, Christine, 2024. "Exergetic life cycle assessment for green hydrogen production," Energy, Elsevier, vol. 299(C).
    3. Daniel Garraín & Santacruz Banacloche & Paloma Ferreira-Aparicio & Antonio Martínez-Chaparro & Yolanda Lechón, 2021. "Sustainability Indicators for the Manufacturing and Use of a Fuel Cell Prototype and Hydrogen Storage for Portable Uses," Energies, MDPI, vol. 14(20), pages 1-15, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kim, Juhan & Lee, Jungbae & Kim, BumChoong & Kim, Jinsoo, 2019. "Raw material criticality assessment with weighted indicators: An application of fuzzy analytic hierarchy process," Resources Policy, Elsevier, vol. 60(C), pages 225-233.
    2. Shule Li & Jingjing Yan & Qiuming Pei & Jinghua Sha & Siyu Mou & Yong Xiao, 2019. "Risk Identification and Evaluation of the Long-term Supply of Manganese Mines in China Based on the VW-BGR Method," Sustainability, MDPI, vol. 11(9), pages 1-23, May.
    3. Griffin, Gillian & Gaustad, Gabrielle & Badami, Kedar, 2019. "A framework for firm-level critical material supply management and mitigation," Resources Policy, Elsevier, vol. 60(C), pages 262-276.
    4. Christoph Helbig & Martin Bruckler & Andrea Thorenz & Axel Tuma, 2021. "An Overview of Indicator Choice and Normalization in Raw Material Supply Risk Assessments," Resources, MDPI, vol. 10(8), pages 1-26, August.
    5. Clement Bonnet & Samuel Carcanague & Emmanuel Hache & Gondia Seck & Marine Simoën, 2019. "Vers une Géopolitique de l'énergie plus complexe ? Une analyse prospective tridimensionnelle de la transition énergétique," Working Papers hal-02971706, HAL.
    6. Göçmen Polat, Elifcan & Yücesan, Melih & Gül, Muhammet, 2023. "A comparative framework for criticality assessment of strategic raw materials in Turkey," Resources Policy, Elsevier, vol. 82(C).
    7. Ewa Lewicka & Katarzyna Guzik & Krzysztof Galos, 2021. "On the Possibilities of Critical Raw Materials Production from the EU’s Primary Sources," Resources, MDPI, vol. 10(5), pages 1-21, May.
    8. Vidal, Rosario & Alberola-Borràs, Jaume-Adrià & Mora-Seró, Iván, 2020. "Abiotic depletion and the potential risk to the supply of cesium," Resources Policy, Elsevier, vol. 68(C).
    9. Aiman Fadil & Paul Davis & John Geraghty, 2023. "A Mixed-Method Approach to Determine the Successful Factors Affecting the Criticality Level of Intermediate and Final Products on National Basis: A Case Study from Saudi Arabia," Sustainability, MDPI, vol. 15(7), pages 1-29, March.
    10. Clément Bonnet & Samuel Carcanague & Emmanuel Hache & Gondia Sokhna Seck & Marine Simoën, 2019. "Some Geopolitical issues of the Energy Transition," Working Papers hal-03191388, HAL.
    11. Zhou, Na & Wu, Qiaosheng & Hu, Xiangping & Zhu, Yongguang & Su, Hui & Xue, Shuangjiao, 2020. "Synthesized indicator for evaluating security of strategic minerals in China: A case study of lithium," Resources Policy, Elsevier, vol. 69(C).
    12. Disna Eheliyagoda & Xianlai Zeng & Jinhui Li, 2020. "A method to assess national metal criticality: the environment as a foremost measurement," Palgrave Communications, Palgrave Macmillan, vol. 7(1), pages 1-12, December.
    13. Hatayama, Hiroki & Tahara, Kiyotaka, 2018. "Adopting an objective approach to criticality assessment: Learning from the past," Resources Policy, Elsevier, vol. 55(C), pages 96-102.
    14. Das, Himadry Shekhar & Tan, Chee Wei & Yatim, A.H.M., 2017. "Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 268-291.
    15. Alicja Kot-Niewiadomska & Krzysztof Galos & Jarosław Kamyk, 2021. "Safeguarding of Key Minerals Deposits as a Basis of Sustainable Development of Polish Economy," Resources, MDPI, vol. 10(5), pages 1-32, May.
    16. Le Boulzec, Hugo & Delannoy, Louis & Andrieu, Baptiste & Verzier, François & Vidal, Olivier & Mathy, Sandrine, 2022. "Dynamic modeling of global fossil fuel infrastructure and materials needs: Overcoming a lack of available data," Applied Energy, Elsevier, vol. 326(C).
    17. Wei, Jing & Zhang, Jianjun & Wu, Xia & Song, Zeyu, 2022. "Governance in mining enterprises: An effective way to promote the intensification of resources—Taking coal resources as an example," Resources Policy, Elsevier, vol. 76(C).
    18. Lapko, Yulia & Trucco, Paolo, 2018. "Influence of power regimes on identification and mitigation of material criticality: The case of platinum group metals in the automotive sector," Resources Policy, Elsevier, vol. 59(C), pages 360-370.
    19. Marie K. Schellens & Johanna Gisladottir, 2018. "Critical Natural Resources: Challenging the Current Discourse and Proposal for a Holistic Definition," Resources, MDPI, vol. 7(4), pages 1-28, December.
    20. Montazerinejad, H. & Eicker, U., 2022. "Recent development of heat and power generation using renewable fuels: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:6:p:3565-:d:522636. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.