IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i3p1237-d486846.html
   My bibliography  Save this article

Investigations on the Sustainable Resource Use of Swiss Timber

Author

Listed:
  • Claude Leyder

    (Institute of Structural Engineering, ETH Zurich, 8093 Zurich, Switzerland)

  • Michael Klippel

    (Institute of Structural Engineering, ETH Zurich, 8093 Zurich, Switzerland)

  • Olin Bartlomé

    (Swiss Wood Innovation Network (S-WIN), 8008 Zurich, Switzerland)

  • Niko Heeren

    (Department of Energy and Process Engineering, Norwegian University of Science & Technology, NO-7491 Trondheim, Norway)

  • Sarah Kissling

    (Institute of Structural Engineering, ETH Zurich, 8093 Zurich, Switzerland)

  • Yutaka Goto

    (Architecture and Civil Engineering, Building Technology, Sustainable Building, Chalmers University of Technology, SE-412 96 Gothenburg, Sweden)

  • Andrea Frangi

    (Institute of Structural Engineering, ETH Zurich, 8093 Zurich, Switzerland)

Abstract

In Switzerland, the advantages of timber buildings for the climate are broadly discussed. In the following paper, a comparative sustainability assessment of four building alternatives is presented. Especially the contribution of implementing Swiss timber versus the implementation of imported timber is highlighted. Additionally, the timber-hybrid building structures are compared to a pure reinforced concrete structure. The timber-hybrid structure, with Swiss timber, has clear ecological advantages with only half the greenhouse gas emissions and half the non-renewable energy consumption compared to the reinforced concrete alternative. Comparing the Swiss timber alternative to the imported timber alternative, there are clear ecological advantages, as well. In terms of economic and social sustainability assessment criteria, the reinforced concrete alternative has the lowest production costs and the lowest labor intensity (measured in terms of full-time equivalents). Additionally, the paper includes an analysis of biogenic CO 2 emissions and CO 2 storage within the timber building alternatives. Finally, an up-scaling to the national level is attempted, showcasing the ecological and economic advantages of promoting the use of locally produced timber.

Suggested Citation

  • Claude Leyder & Michael Klippel & Olin Bartlomé & Niko Heeren & Sarah Kissling & Yutaka Goto & Andrea Frangi, 2021. "Investigations on the Sustainable Resource Use of Swiss Timber," Sustainability, MDPI, vol. 13(3), pages 1-34, January.
  • Handle: RePEc:gam:jsusta:v:13:y:2021:i:3:p:1237-:d:486846
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/3/1237/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/13/3/1237/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Niko Heeren & Stefanie Hellweg, 2019. "Tracking Construction Material over Space and Time: Prospective and Geo‐referenced Modeling of Building Stocks and Construction Material Flows," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 253-267, February.
    2. Florian Suter & Bernhard Steubing & Stefanie Hellweg, 2017. "Life Cycle Impacts and Benefits of Wood along the Value Chain: The Case of Switzerland," Journal of Industrial Ecology, Yale University, vol. 21(4), pages 874-886, August.
    3. Geoffrey Guest & Francesco Cherubini & Anders H. Strømman, 2013. "Global Warming Potential of Carbon Dioxide Emissions from Biomass Stored in the Anthroposphere and Used for Bioenergy at End of Life," Journal of Industrial Ecology, Yale University, vol. 17(1), pages 20-30, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rosemarie Garay & Francis Pfenniger & Miguel Castillo & Consuelo Fritz, 2021. "Quality and Sustainability Indicators of the Prefabricated Wood Housing Industry—A Chilean Case Study," Sustainability, MDPI, vol. 13(15), pages 1-21, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Charles Breton & Pierre Blanchet & Ben Amor & Robert Beauregard & Wen-Shao Chang, 2018. "Assessing the Climate Change Impacts of Biogenic Carbon in Buildings: A Critical Review of Two Main Dynamic Approaches," Sustainability, MDPI, vol. 10(6), pages 1-30, June.
    2. Maja Wiprächtiger & Martina Rapp & Stefanie Hellweg & Rhythima Shinde & Melanie Haupt, 2022. "Turning trash into treasure: An approach to the environmental assessment of waste prevention and its application to clothing and furniture in Switzerland," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1389-1405, August.
    3. Chihiro Kayo & Ryu Noda, 2018. "Climate Change Mitigation Potential of Wood Use in Civil Engineering in Japan Based on Life-Cycle Assessment," Sustainability, MDPI, vol. 10(2), pages 1-19, February.
    4. Sampo Soimakallio & Tuomo Kalliokoski & Aleksi Lehtonen & Olli Salminen, 2021. "On the trade-offs and synergies between forest carbon sequestration and substitution," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 26(1), pages 1-17, January.
    5. Jörg Schweinle & Natalia Geng & Susanne Iost & Holger Weimar & Dominik Jochem, 2020. "Monitoring Sustainability Effects of the Bioeconomy: A Material Flow Based Approach Using the Example of Softwood Lumber and Its Core Product Epal 1 Pallet," Sustainability, MDPI, vol. 12(6), pages 1-27, March.
    6. Max Rehberger & Michael Hiete, 2020. "Allocation of Environmental Impacts in Circular and Cascade Use of Resources—Incentive-Driven Allocation as a Prerequisite for Cascade Persistence," Sustainability, MDPI, vol. 12(11), pages 1-28, May.
    7. Stefan Pauliuk & Tomer Fishman & Niko Heeren & Peter Berrill & Qingshi Tu & Paul Wolfram & Edgar G. Hertwich, 2021. "Linking service provision to material cycles: A new framework for studying the resource efficiency–climate change (RECC) nexus," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 260-273, April.
    8. Jarre, Matteo & Petit-Boix, Anna & Priefer, Carmen & Meyer, Rolf & Leipold, Sina, 2020. "Transforming the bio-based sector towards a circular economy - What can we learn from wood cascading?," Forest Policy and Economics, Elsevier, vol. 110(C).
    9. Jaime A. Mesa & Carlos Fúquene-Retamoso & Aníbal Maury-Ramírez, 2021. "Life Cycle Assessment on Construction and Demolition Waste: A Systematic Literature Review," Sustainability, MDPI, vol. 13(14), pages 1-22, July.
    10. Lachlan Curmi & Kumudu Kaushalya Weththasinghe & Muhammad Atiq Ur Rehman Tariq, 2022. "Global Policy Review on Embodied Flows: Recommendations for Australian Construction Sector," Sustainability, MDPI, vol. 14(21), pages 1-19, November.
    11. Elias Hurmekoski & Tanja Myllyviita & Jyri Seppälä & Tero Heinonen & Antti Kilpeläinen & Timo Pukkala & Tuomas Mattila & Lauri Hetemäki & Antti Asikainen & Heli Peltola, 2020. "Impact of structural changes in wood‐using industries on net carbon emissions in Finland," Journal of Industrial Ecology, Yale University, vol. 24(4), pages 899-912, August.
    12. Venn, Tyron J., 2023. "Reconciling timber harvesting, biodiversity conservation and carbon sequestration in Queensland, Australia," Forest Policy and Economics, Elsevier, vol. 152(C).
    13. Claudio Zandonella Callegher & Gianluca Grazieschi & Eric Wilczynski & Ulrich Filippi Oberegger & Simon Pezzutto, 2023. "Assessment of Building Materials in the European Residential Building Stock: An Analysis at EU27 Level," Sustainability, MDPI, vol. 15(11), pages 1-19, May.
    14. Jim Hart & Francesco Pomponi, 2020. "More Timber in Construction: Unanswered Questions and Future Challenges," Sustainability, MDPI, vol. 12(8), pages 1-17, April.
    15. Yupeng Liu & Jiajia Li & Wei‐Qiang Chen & Lulu Song & Shaoqing Dai, 2022. "Quantifying urban mass gain and loss by a GIS‐based material stocks and flows analysis," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 1051-1060, June.
    16. Carine Lausselet & Johana Paola Forero Urrego & Eirik Resch & Helge Brattebø, 2021. "Temporal analysis of the material flows and embodied greenhouse gas emissions of a neighborhood building stock," Journal of Industrial Ecology, Yale University, vol. 25(2), pages 419-434, April.
    17. Stefan Pauliuk & Niko Heeren, 2020. "ODYM—An open software framework for studying dynamic material systems: Principles, implementation, and data structures," Journal of Industrial Ecology, Yale University, vol. 24(3), pages 446-458, June.
    18. Wang, Jinman & Wang, Ruogu & Zhu, Yucheng & Li, Jiayan, 2018. "Life cycle assessment and environmental cost accounting of coal-fired power generation in China," Energy Policy, Elsevier, vol. 115(C), pages 374-384.
    19. Ruichang Mao & Yi Bao & Huabo Duan & Gang Liu, 2021. "Global urban subway development, construction material stocks, and embodied carbon emissions," Palgrave Communications, Palgrave Macmillan, vol. 8(1), pages 1-11, December.
    20. van den Oever, A.E.M. & Costa, D. & Messagie, M., 2023. "Prospective life cycle assessment of alternatively fueled heavy-duty trucks," Applied Energy, Elsevier, vol. 336(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:3:p:1237-:d:486846. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.