IDEAS home Printed from https://ideas.repec.org/a/gam/jresou/v3y2014i1p291-318d34055.html
   My bibliography  Save this article

Recycling Potentials of Critical Metals-Analyzing Secondary Flows from Selected Applications

Author

Listed:
  • Till Zimmermann

    (Department of Technological Design and Development, Faculty of Production Engineering, University of Bremen, Bremen D-28359, Germany
    ARTEC–Research Center for Sustainability Studies, Bremen D-28359, Germany)

  • Stefan Gößling-Reisemann

    (Department of Technological Design and Development, Faculty of Production Engineering, University of Bremen, Bremen D-28359, Germany
    ARTEC–Research Center for Sustainability Studies, Bremen D-28359, Germany)

Abstract

Metal mobilization in general, as well as the number of metals used in products to increase performance and provide sometimes unique functionalities, has increased steadily in the past decades. Materials, such as indium, gallium, platinum group metals (PGM), and rare earths (RE), are used ever more frequently in high-tech applications and their criticality as a function of economic importance and supply risks has been highlighted in various studies. Nevertheless, recycling rates are often below one percent. Against this background, secondary flows of critical metals from three different end-of-life products up to 2020 are modeled and losses along the products’ end-of-life (EOL) chain are identified. Two established applications of PGM and RE–industrial catalysts and thermal barrier coatings–and CIGS photovoltaic cells as a relatively new product have been analyzed. In addition to a quantification of future EOL flows, the analysis showed that a relatively well working recycling system exists for PGM-bearing catalysts, while a complete loss of critical metals occurs for the other applications. The reasons include a lack of economic incentives, technologically caused material dissipation and other technological challenges.

Suggested Citation

  • Till Zimmermann & Stefan Gößling-Reisemann, 2014. "Recycling Potentials of Critical Metals-Analyzing Secondary Flows from Selected Applications," Resources, MDPI, vol. 3(1), pages 1-28, March.
  • Handle: RePEc:gam:jresou:v:3:y:2014:i:1:p:291-318:d:34055
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2079-9276/3/1/291/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2079-9276/3/1/291/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Fthenakis, Vasilis, 2009. "Sustainability of photovoltaics: The case for thin-film solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2746-2750, December.
    2. Perrine Chancerel & Christina E.M. Meskers & Christian Hagelüken & Vera Susanne Rotter, 2009. "Assessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment," Journal of Industrial Ecology, Yale University, vol. 13(5), pages 791-810, October.
    3. Till Zimmermann & Max Rehberger & Stefan Gößling-Reisemann, 2013. "Material Flows Resulting from Large Scale Deployment of Wind Energy in Germany," Resources, MDPI, vol. 2(3), pages 1-32, August.
    4. Sherwani, A.F. & Usmani, J.A. & Varun, 2010. "Life cycle assessment of solar PV based electricity generation systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 540-544, January.
    5. Masahiro Oguchi & Shinsuke Murakami & Tomohiro Tasaki & Ichiro Daigo & Seiji Hashimoto, 2010. "Lifespan of Commodities, Part II," Journal of Industrial Ecology, Yale University, vol. 14(4), pages 613-626, August.
    6. Shinsuke Murakami & Masahiro Oguchi & Tomohiro Tasaki & Ichiro Daigo & Seiji Hashimoto, 2010. "Lifespan of Commodities, Part I," Journal of Industrial Ecology, Yale University, vol. 14(4), pages 598-612, August.
    7. Azzopardi, B. & Mutale, J., 2010. "Life cycle analysis for future photovoltaic systems using hybrid solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 1130-1134, April.
    8. Kagawa, Shigemi & Tasaki, Tomohiro & Moriguchi, Yuichi, 2006. "The environmental and economic consequences of product lifetime extension: Empirical analysis for automobile use," Ecological Economics, Elsevier, vol. 58(1), pages 108-118, June.
    9. Oguchi, Masahiro & Kameya, Takashi & Yagi, Suguru & Urano, Kohei, 2008. "Product flow analysis of various consumer durables in Japan," Resources, Conservation & Recycling, Elsevier, vol. 52(3), pages 463-480.
    10. Raugei, Marco & Fthenakis, Vasilis, 2010. "Cadmium flows and emissions from CdTe PV: future expectations," Energy Policy, Elsevier, vol. 38(9), pages 5223-5228, September.
    11. Stoppato, A., 2008. "Life cycle assessment of photovoltaic electricity generation," Energy, Elsevier, vol. 33(2), pages 224-232.
    12. T. E. Graedel & Julian Allwood & Jean‐Pierre Birat & Matthias Buchert & Christian Hagelüken & Barbara K. Reck & Scott F. Sibley & Guido Sonnemann, 2011. "What Do We Know About Metal Recycling Rates?," Journal of Industrial Ecology, Yale University, vol. 15(3), pages 355-366, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Evgenii A. Konnikov & Olga A. Konnikova & Dmitriy G. Rodionov, 2019. "Impact of 3D-Printing Technologies on the Transformation of Industrial Production in the Arctic Zone," Resources, MDPI, vol. 8(1), pages 1-15, January.
    2. Jenni Ylä-Mella & Eva Pongrácz, 2016. "Drivers and Constraints of Critical Materials Recycling: The Case of Indium," Resources, MDPI, vol. 5(4), pages 1-12, November.
    3. Mei, Yueru & Geng, Yong & Chen, Zhujun & Xiao, Shijiang & Gao, Ziyan, 2024. "Ensuring the sustainable supply of semiconductor material: A case of germanium in China," International Journal of Production Economics, Elsevier, vol. 271(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    2. Ludin, Norasikin Ahmad & Mustafa, Nur Ifthitah & Hanafiah, Marlia M. & Ibrahim, Mohd Adib & Asri Mat Teridi, Mohd & Sepeai, Suhaila & Zaharim, Azami & Sopian, Kamaruzzaman, 2018. "Prospects of life cycle assessment of renewable energy from solar photovoltaic technologies: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 11-28.
    3. Gerbinet, Saïcha & Belboom, Sandra & Léonard, Angélique, 2014. "Life Cycle Analysis (LCA) of photovoltaic panels: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 747-753.
    4. Sumper, Andreas & Robledo-García, Mercedes & Villafáfila-Robles, Roberto & Bergas-Jané, Joan & Andrés-Peiró, Juan, 2011. "Life-cycle assessment of a photovoltaic system in Catalonia (Spain)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3888-3896.
    5. Bravi, Mirko & Parisi, Maria Laura & Tiezzi, Enzo & Basosi, Riccardo, 2011. "Life cycle assessment of a micromorph photovoltaic system," Energy, Elsevier, vol. 36(7), pages 4297-4306.
    6. Barbara V. Kasulaitis & Callie W. Babbitt & Andrew K. Krock, 2019. "Dematerialization and the Circular Economy: Comparing Strategies to Reduce Material Impacts of the Consumer Electronic Product Ecosystem," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 119-132, February.
    7. Mansouri, Noura Y. & Crookes, Roy J. & Korakianitis, Theodosios, 2013. "A projection of energy consumption and carbon dioxide emissions in the electricity sector for Saudi Arabia: The case for carbon capture and storage and solar photovoltaics," Energy Policy, Elsevier, vol. 63(C), pages 681-695.
    8. Kalmykova, Yuliya & Berg, Per E.-O. & Patrício, João & Lisovskaja, Vera, 2017. "Portable battery lifespans and new estimation method for battery collection rate based on a lifespan modeling approach," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 65-74.
    9. Peng, Jinqing & Lu, Lin & Yang, Hongxing, 2013. "Review on life cycle assessment of energy payback and greenhouse gas emission of solar photovoltaic systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 255-274.
    10. Tulga Mendjargal & Eiji Yamasue & Hiroki Tanikawa, 2022. "Estimation of the Lifespan of Imported Passenger Vehicles in Mongolia," Sustainability, MDPI, vol. 14(21), pages 1-16, November.
    11. Pauliuk, Stefan & Kondo, Yasushi & Nakamura, Shinichiro & Nakajima, Kenichi, 2017. "Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 84-93.
    12. Yuya Nakamoto, 2017. "CO2 reduction potentials through the market expansion and lifetime extension of used cars," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 6(1), pages 1-14, December.
    13. Hu, Xueyue & Wang, Chunying & Elshkaki, Ayman, 2024. "Material-energy Nexus: A systematic literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    14. Ravikumar, Dwarakanath & Malghan, Deepak, 2013. "Material constraints for indigenous production of CdTe PV: Evidence from a Monte Carlo experiment using India's National Solar Mission Benchmarks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 393-403.
    15. Prehoda, Emily W. & Pearce, Joshua M., 2017. "Potential lives saved by replacing coal with solar photovoltaic electricity production in the U.S," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 710-715.
    16. Wang, Lunche & Qiu, Tianzhi & Zhang, Ming & Cao, Qian & Qin, Wenmin & Wang, Shaoqiang & Wang, Lizhe & Chen, Deliang & Wild, Martin, 2024. "Carbon emissions and reduction performance of photovoltaic systems in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 200(C).
    17. M. A. Parvez Mahmud & Nazmul Huda & Shahjadi Hisan Farjana & Candace Lang, 2018. "Environmental Impacts of Solar-Photovoltaic and Solar-Thermal Systems with Life-Cycle Assessment," Energies, MDPI, vol. 11(9), pages 1-21, September.
    18. Elshkaki, Ayman & Graedel, T.E., 2015. "Solar cell metals and their hosts: A tale of oversupply and undersupply," Applied Energy, Elsevier, vol. 158(C), pages 167-177.
    19. Lloyd, Bob & Forest, Andrew S., 2010. "The transition to renewables: Can PV provide an answer to the peak oil and climate change challenges?," Energy Policy, Elsevier, vol. 38(11), pages 7378-7394, November.
    20. Mahmud, M.A. Parvez & Huda, Nazmul & Farjana, Shahjadi Hisan & Lang, Candace, 2020. "Life-cycle impact assessment of renewable electricity generation systems in the United States," Renewable Energy, Elsevier, vol. 151(C), pages 1028-1045.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jresou:v:3:y:2014:i:1:p:291-318:d:34055. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.