IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v10y2021i1p88-d712051.html
   My bibliography  Save this article

Process Modeling, Optimization and Cost Analysis of a Sulfur Recovery Unit by Applying Pinch Analysis on the Claus Process in a Gas Processing Plant

Author

Listed:
  • Muhammad Arslan Zahid

    (School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan)

  • Muhammad Ahsan

    (School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan)

  • Iftikhar Ahmad

    (School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan)

  • Muhammad Nouman Aslam Khan

    (School of Chemical & Materials Engineering, National University of Sciences & Technology, Islamabad 44000, Pakistan)

Abstract

The Claus process is one of the promising technologies for acid gas processing and sulfur recovery. Hydrogen sulfide primarily exists as a byproduct in the gas processing unit. It must be removed from natural gas. The Environmental Protection Agency (EPA) notices that increasing SO 2 and CO 2 in the air harms the environment. Sulfur generally has an elemental content of 0.1–6 wt % in crude oil, but the value could be higher than 14% for some crude oils and asphalts. It produces SO 2 and CO 2 gases, which damage the environment and atmosphere of the earth, called primary pollutants. When SO 2 gas is reacted with water in the atmosphere, it causes sulphur and nitric acid, called a secondary pollutant. The world countries started desulphurization in 1962 to reduce the amount of sulfur in petroleum products. In this research, the Claus process was modeled in Aspen Plus software (AspenTech, Bedford, MA, USA) and industrial data validated it. The Peng–Robinson method is used for the simulation of hydrocarbon components. The influence of oxygen gas concentration, furnace temperature, the temperature of the first catalytic reactor, and temperature of the second catalytic reactor on the Claus process were studied. The first objective of the research is process modeling and simulation of a chemical process. The second objective is optimizing the process. The optimization tool in the Aspen Plus is used to obtain the best operating parameters. The optimization results show that sulfur recovery increased to 18%. Parametric analysis is studied regarding operating parameters and design parameters for increased production of sulfur. Due to pinch analysis on the Claus process, the operating cost of the heat exchangers is reduced to 40%. The third objective is the cost analysis of the process. Before optimization, it is shown that the production of sulfur recovery increased. In addition, the recovery of sulfur from hydrogen sulfide gas also increased. After optimizing the process, it is shown that the cost of heating and cooling utilities is reduced. In addition, the size of equipment is reduced. The optimization causes 2.5% of the profit on cost analysis.

Suggested Citation

  • Muhammad Arslan Zahid & Muhammad Ahsan & Iftikhar Ahmad & Muhammad Nouman Aslam Khan, 2021. "Process Modeling, Optimization and Cost Analysis of a Sulfur Recovery Unit by Applying Pinch Analysis on the Claus Process in a Gas Processing Plant," Mathematics, MDPI, vol. 10(1), pages 1-18, December.
    • Handle: RePEc:gam:jmathe:v:10:y:2021:i:1:p:88-:d:712051
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/10/1/88/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2227-7390/10/1/88/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Selim, H. & Gupta, A.K. & Sassi, M., 2012. "Novel error propagation approach for reducing H2S/O2 reaction mechanism," Applied Energy, Elsevier, vol. 93(C), pages 116-124.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ibrahim, S. & Al Shoaibi, A. & Gupta, A.K., 2015. "Effect of benzene on product evolution in a H2S/O2 flame under Claus condition," Applied Energy, Elsevier, vol. 145(C), pages 21-26.
    2. Ibrahim, S. & Gupta, A.K. & Al Shoaibi, A., 2015. "Xylene and H2S destruction in high temperature flames under Claus condition," Applied Energy, Elsevier, vol. 154(C), pages 352-360.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:10:y:2021:i:1:p:88-:d:712051. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.