IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i21p7390-d673159.html
   My bibliography  Save this article

Torque Ripple Minimizing of Uniform Slot Machines with Delta Rotor via Subdomain Analysis

Author

Listed:
  • Minhyeok Lee

    (Department of Electrical Engineering, Pohang University of Science and Technology, 77 Cheongam-ro, Nam-gu, Pohang 37673, Gyeongbuk, Korea)

  • Yunkyung Hwang

    (Department of Electrical Engineering, Pohang University of Science and Technology, 77 Cheongam-ro, Nam-gu, Pohang 37673, Gyeongbuk, Korea)

  • Kwanghee Nam

    (Department of Electrical Engineering, Pohang University of Science and Technology, 77 Cheongam-ro, Nam-gu, Pohang 37673, Gyeongbuk, Korea)

Abstract

Since the slot opening is large in the uniform slot machine, the torque ripple generated by overlapping or misaligning with the rotor cavity is remarkably large in the case of interior permanent magnet (IPM) machine. In this work, it is observed that the magnitude of torque ripple depends strongly on the phase difference between air-gap field harmonics: The ripple is minimized when the two dominant harmonic components cancel each other. Based on this fact, a condition is developed to minimize torque ripple by adjusting the q -flux channel width and d -flux barrier width. The torque ripple minimizing solution is found from a level chart made by subdomain time-stepping analysis. Finite element analysis (FEA) also gives a very similar minimizing solution. A prototype machine is manufactured, and its performances are validated through experiments.

Suggested Citation

  • Minhyeok Lee & Yunkyung Hwang & Kwanghee Nam, 2021. "Torque Ripple Minimizing of Uniform Slot Machines with Delta Rotor via Subdomain Analysis," Energies, MDPI, vol. 14(21), pages 1-18, November.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:21:p:7390-:d:673159
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/21/7390/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/21/7390/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Myeong-Hwan Hwang & Hae-Sol Lee & Se-Hyeon Yang & Gye-Seong Lee & Jong-Ho Han & Dong-Hyun Kim & Hyeon-Woo Kim & Hyun-Rok Cha, 2019. "Cogging Torque Reduction and Offset of Dual-Rotor Interior Permanent Magnet Motor in Electric Vehicle Traction Platforms," Energies, MDPI, vol. 12(9), pages 1-14, May.
    2. Myeong-Hwan Hwang & Jong-Ho Han & Dong-Hyun Kim & Hyun-Rok Cha, 2018. "Design and Analysis of Rotor Shapes for IPM Motors in EV Power Traction Platforms," Energies, MDPI, vol. 11(10), pages 1-12, September.
    3. Benedikt Groschup & Florian Pauli & Kay Hameyer, 2021. "Influence of the Preformed Coil Design on the Thermal Behavior of Electric Traction Machines," Energies, MDPI, vol. 14(4), pages 1-16, February.
    4. Myeong-Hwan Hwang & Hae-Sol Lee & Hyun-Rok Cha, 2018. "Analysis of Torque Ripple and Cogging Torque Reduction in Electric Vehicle Traction Platform Applying Rotor Notched Design," Energies, MDPI, vol. 11(11), pages 1-14, November.
    5. Hyungkwan Jang & Hyunwoo Kim & Huai-Cong Liu & Ho-Joon Lee & Ju Lee, 2021. "Investigation on the Torque Ripple Reduction Method of a Hybrid Electric Vehicle Motor," Energies, MDPI, vol. 14(5), pages 1-13, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Łukasz Knypiński & Karol Pawełoszek & Yvonnick Le Menach, 2020. "Optimization of Low-Power Line-Start PM Motor Using Gray Wolf Metaheuristic Algorithm," Energies, MDPI, vol. 13(5), pages 1-11, March.
    2. Yin-Hui Lee & Min-Fu Hsieh, 2022. "Swiveling Magnetization for Anisotropic Magnets for Variable Flux Spoke-Type Permanent Magnet Motor Applied to Electric Vehicles," Energies, MDPI, vol. 15(10), pages 1-20, May.
    3. Hyungkwan Jang & Hyunwoo Kim & Huai-Cong Liu & Ho-Joon Lee & Ju Lee, 2021. "Investigation on the Torque Ripple Reduction Method of a Hybrid Electric Vehicle Motor," Energies, MDPI, vol. 14(5), pages 1-13, March.
    4. Yang Sun & Shuhui Li & Malek Ramezani & Bharat Balasubramanian & Bian Jin & Yixiang Gao, 2019. "DSP Implementation of a Neural Network Vector Controller for IPM Motor Drives," Energies, MDPI, vol. 12(13), pages 1-17, July.
    5. Ting Yang & Takahiro Kawaguchi & Seiji Hashimoto & Wei Jiang, 2020. "Switching Sequence Model Predictive Direct Torque Control of IPMSMs for EVs in Switch Open-Circuit Fault-Tolerant Mode," Energies, MDPI, vol. 13(21), pages 1-15, October.
    6. Branislav Dobrucky & Slavomir Kascak & Michal Frivaldsky & Michal Prazenica, 2021. "Determination and Compensation of Non-Active Torques for Parallel HEV Using PMSM/IM Motor(s)," Energies, MDPI, vol. 14(10), pages 1-26, May.
    7. Piotr Mynarek & Janusz Kołodziej & Adrian Młot & Marcin Kowol & Marian Łukaniszyn, 2021. "Influence of a Winding Short-Circuit Fault on Demagnetization Risk and Local Magnetic Forces in V-Shaped Interior PMSM with Distributed and Concentrated Winding," Energies, MDPI, vol. 14(16), pages 1-16, August.
    8. Chung-Seong Lee & Kyoung-Soo Cha & Jin-Cheol Park & Myung-Seop Lim, 2020. "Tolerance-Insensitive Design of the Magnet Shape for a Surface Permanent Magnet Synchronous Motor," Energies, MDPI, vol. 13(6), pages 1-16, March.
    9. Marcin Jastrzębski & Jacek Kabziński, 2021. "Approximation of Permanent Magnet Motor Flux Distribution by Partially Informed Neural Networks," Energies, MDPI, vol. 14(18), pages 1-21, September.
    10. Chaelim Jeong & Dongho Lee & Jin Hur, 2019. "Mitigation Method of Slot Harmonic Cogging Torque Considering Unevenly Magnetized Permanent Magnets in PMSM," Energies, MDPI, vol. 12(20), pages 1-15, October.
    11. Massimo Caruso & Antonino Oscar Di Tommaso & Rosario Miceli & Fabio Viola, 2022. "A Cogging Torque Minimization Procedure for Interior Permanent Magnet Synchronous Motors Based on a Progressive Modification of the Rotor Lamination Geometry," Energies, MDPI, vol. 15(14), pages 1-19, July.
    12. Thyago Estrabis & Gabriel Gentil & Raymundo Cordero, 2021. "Development of a Resolver-to-Digital Converter Based on Second-Order Difference Generalized Predictive Control," Energies, MDPI, vol. 14(2), pages 1-22, January.
    13. Maksymilian Mądziel & Tiziana Campisi & Artur Jaworski & Giovanni Tesoriere, 2021. "The Development of Strategies to Reduce Exhaust Emissions from Passenger Cars in Rzeszow City—Poland. A Preliminary Assessment of the Results Produced by the Increase of E-Fleet," Energies, MDPI, vol. 14(4), pages 1-21, February.
    14. Catalin Petrea Ion & Marius Daniel Calin & Ioan Peter, 2023. "Design of a 3 kW PMSM with Super Premium Efficiency," Energies, MDPI, vol. 16(1), pages 1-11, January.
    15. Farya Golesorkhie & Fuwen Yang & Ljubo Vlacic & Geoff Tansley, 2020. "Field Oriented Control-Based Reduction of the Vibration and Power Consumption of a Blood Pump," Energies, MDPI, vol. 13(15), pages 1-18, July.
    16. Felix Veeser & Tristan Braun & Lothar Kiltz & Johannes Reuter, 2021. "Nonlinear Modelling, Flatness-Based Current Control, and Torque Ripple Compensation for Interior Permanent Magnet Synchronous Machines," Energies, MDPI, vol. 14(6), pages 1-14, March.
    17. T. A. Anuja & M. Arun Noyal Doss, 2021. "Reduction of Cogging Torque in Surface Mounted Permanent Magnet Brushless DC Motor by Adapting Rotor Magnetic Displacement," Energies, MDPI, vol. 14(10), pages 1-20, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:21:p:7390-:d:673159. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.