IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i1p208-d474085.html
   My bibliography  Save this article

Application of Pseudohomogeneous and Heterogeneous Models in Assessing the Behavior of a Fluidized-Bed Catalytic Reactor

Author

Listed:
  • Katarzyna Bizon

    (Faculty of Chemical Engineering and Technology, Cracow University of Technology, ul. Warszawska 24, 31-155 Kraków, Poland)

Abstract

Comparative analysis of the steady-state and transient properties of a bubbling fluidized-bed catalytic reactor obtained according to different mathematical models of the emulsion zone was performed to verify the commonly used assumption regarding the pseudohomogeneous nature of this zone. Four different mathematical models of the fluidized-bed reactor dynamics were formulated, based on different thermal and diffusional conditions at the gas-solid interface and within the catalyst pellet, namely the model based on the assumption of pseudohomogeneous character for the emulsion zone, and a group of two-scale models accounting for the heterogeneous character of this zone. It was demonstrated that, while the pseudohomogeneous model of the emulsion zone predicts almost identical behavior of the reactor at steady-state as the proposed heterogeneous models, it may fail in the prediction of the reactor start-up behavior, especially when dealing with highly exothermic processes run at relatively high fluidization velocity.

Suggested Citation

  • Katarzyna Bizon, 2021. "Application of Pseudohomogeneous and Heterogeneous Models in Assessing the Behavior of a Fluidized-Bed Catalytic Reactor," Energies, MDPI, vol. 14(1), pages 1-22, January.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:1:p:208-:d:474085
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/1/208/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/1/208/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zbigniew Plutecki & Paweł Sattler & Krystian Ryszczyk & Anna Duczkowska & Stanisław Anweiler, 2020. "Thermokinetics of Brown Coal during a Fluidized Drying Process," Energies, MDPI, vol. 13(3), pages 1-16, February.
    2. Lucio Zaccariello & Maria Laura Mastellone, 2015. "Fluidized-Bed Gasification of Plastic Waste, Wood, and Their Blends with Coal," Energies, MDPI, vol. 8(8), pages 1-17, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Octávio Alves & Luís Calado & Roberta M. Panizio & Catarina Nobre & Eliseu Monteiro & Paulo Brito & Margarida Gonçalves, 2022. "Gasification of Solid Recovered Fuels with Variable Fractions of Polymeric Materials," Energies, MDPI, vol. 15(21), pages 1-19, November.
    2. Xia Liu & Juntao Wei & Wei Huo & Guangsuo Yu, 2017. "Gasification under CO 2 –Steam Mixture: Kinetic Model Study Based on Shared Active Sites," Energies, MDPI, vol. 10(11), pages 1-10, November.
    3. Huang, Jijiang & Veksha, Andrei & Chan, Wei Ping & Giannis, Apostolos & Lisak, Grzegorz, 2022. "Chemical recycling of plastic waste for sustainable material management: A prospective review on catalysts and processes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    4. Bassey, Uduak & Sarquah, Khadija & Hartmann, Michael & Tom, Abasi-ofon & Beck, Gesa & Antwi, Edward & Narra, Satyanarayana & Nelles, Michael, 2023. "Thermal treatment options for single-use, multilayered and composite waste plastics in Africa," Energy, Elsevier, vol. 270(C).
    5. Buentello-Montoya, D.A. & Duarte-Ruiz, C.A. & Maldonado-Escalante, J.F., 2023. "Co-gasification of waste PET, PP and biomass for energy recovery: A thermodynamic model to assess the produced syngas quality," Energy, Elsevier, vol. 266(C).
    6. María Pilar González-Vázquez & Roberto García & Covadonga Pevida & Fernando Rubiera, 2017. "Optimization of a Bubbling Fluidized Bed Plant for Low-Temperature Gasification of Biomass," Energies, MDPI, vol. 10(3), pages 1-16, March.
    7. Carlos Vargas-Salgado & Elías Hurtado-Pérez & David Alfonso-Solar & Anders Malmquist, 2021. "Empirical Design, Construction, and Experimental Test of a Small-Scale Bubbling Fluidized Bed Reactor," Sustainability, MDPI, vol. 13(3), pages 1-22, January.
    8. Ming Yan & Xinnan Song & Jin Tian & Xuebin Lv & Ze Zhang & Xiaoyan Yu & Shuting Zhang, 2020. "Construction of a New Type of Coal Moisture Control Device Based on the Characteristic of Indirect Drying Process of Coking Coal," Energies, MDPI, vol. 13(16), pages 1-20, August.
    9. Burra, K.G. & Gupta, A.K., 2018. "Synergistic effects in steam gasification of combined biomass and plastic waste mixtures," Applied Energy, Elsevier, vol. 211(C), pages 230-236.
    10. Rukshan Jayathilake & Souman Rudra, 2017. "Numerical and Experimental Investigation of Equivalence Ratio (ER) and Feedstock Particle Size on Birchwood Gasification," Energies, MDPI, vol. 10(8), pages 1-19, August.
    11. Armando Vitale & Alessandro Antonio Papa & Stefano Iannello & Erwin Ciro & Arda Hatunoglu & Valerio Corradetti & Nicola Rovelli & Pier Ugo Foscolo & Andrea Di Carlo, 2023. "Devolatilization of Polypropylene Particles in Fluidized Bed," Energies, MDPI, vol. 16(17), pages 1-20, August.
    12. Fazil, A. & Kumar, Sandeep & Mahajani, Sanjay M., 2022. "Downdraft co-gasification of high ash biomass and plastics," Energy, Elsevier, vol. 243(C).
    13. Domenico Borello & Antonio M. Pantaleo & Michele Caucci & Benedetta De Caprariis & Paolo De Filippis & Nilay Shah, 2017. "Modeling and Experimental Study of a Small Scale Olive Pomace Gasifier for Cogeneration: Energy and Profitability Analysis," Energies, MDPI, vol. 10(12), pages 1-17, November.
    14. Ana Ramos & Carlos Afonso Teixeira & Abel Rouboa, 2019. "Environmental Assessment of Municipal Solid Waste by Two-Stage Plasma Gasification," Energies, MDPI, vol. 12(1), pages 1-16, January.
    15. Fabio Montagnaro & Lucio Zaccariello, 2022. "Gasification of Spruce Wood Chips in a 1.5 MW th Fluidised Bed Reactor," Energies, MDPI, vol. 15(16), pages 1-13, August.
    16. Smoliński, Adam & Wojtacha-Rychter, Karolina & Król, Magdalena & Magdziarczyk, Małgorzata & Polański, Jarosław & Howaniec, Natalia, 2022. "Co-gasification of refuse-derived fuels and bituminous coal with oxygen/steam blend to hydrogen rich gas," Energy, Elsevier, vol. 254(PA).
    17. Ramos, Ana & Rouboa, Abel, 2020. "Syngas production strategies from biomass gasification: Numerical studies for operational conditions and quality indexes," Renewable Energy, Elsevier, vol. 155(C), pages 1211-1221.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:1:p:208-:d:474085. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.