IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i2p346-d307281.html
   My bibliography  Save this article

An Efficient Numerical Method for Pressure Loss Investigation in an Oil/Air Separator with Metal Foam in an Aero-Engine

Author

Listed:
  • Lifen Zhang

    (School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China)

  • Xiaoxue Zhang

    (School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China)

  • Zhenxia Liu

    (School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China)

Abstract

An efficient method of simulating pressure loss in a separator with metal foam is reported. In this method, a metal foam is modeled as a porous media having homogenized permeability and inertial resistance coefficients. The permeability and inertial resistance coefficients were obtained by a numerical method that was validated by experimental data from a literature. Then the pressure drop in the separator with metal foam replaced by porous media was efficiently simulated under different working conditions, and the results were analyzed. It was found that the porous media had a great effect on the pressure drop in the separator. As pores per inch (PPI) and rotating speed increase and porosity decreases, the pressure drop of the separator increases. The results indicate that replacing metal foam by porous media is effective and simulating the pressure drop is feasible and effective in a separator with metal foam.

Suggested Citation

  • Lifen Zhang & Xiaoxue Zhang & Zhenxia Liu, 2020. "An Efficient Numerical Method for Pressure Loss Investigation in an Oil/Air Separator with Metal Foam in an Aero-Engine," Energies, MDPI, vol. 13(2), pages 1-17, January.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:2:p:346-:d:307281
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/2/346/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/2/346/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xue Chen & Xiaolei Li & Xinlin Xia & Chuang Sun & Rongqiang Liu, 2019. "Thermal Performance of a PCM-Based Thermal Energy Storage with Metal Foam Enhancement," Energies, MDPI, vol. 12(17), pages 1-18, August.
    2. Ashley Fly & Kyoungyoun Kim & John Gordon & Daniel Butcher & Rui Chen, 2019. "Liquid Water Transport in Porous Metal Foam Flow-Field Fuel Cells: A Two-Phase Numerical Modelling and Ex-Situ Experimental Study," Energies, MDPI, vol. 12(7), pages 1-14, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Martin Beer & Marcela Taušová & Radim Rybár & Michal Kaľavský, 2020. "A Novel Economical Method of Determining the Geometric Characteristic of the Metal Foam Based on Image Analysis," Energies, MDPI, vol. 13(13), pages 1-11, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bao, Zhiming & Niu, Zhiqiang & Jiao, Kui, 2020. "Gas distribution and droplet removal of metal foam flow field for proton exchange membrane fuel cells," Applied Energy, Elsevier, vol. 280(C).
    2. Mohamed Houcine Dhaou & Sofiene Mellouli & Faisal Alresheedi & Yassine El-Ghoul, 2021. "Numerical Assessment of an Innovative Design of an Evacuated Tube Solar Collector Incorporated with PCM Embedded Metal Foam/Plate Fins," Sustainability, MDPI, vol. 13(19), pages 1-11, September.
    3. Zhang, Lu & Liu, Jie & Du, Shaojie & Zhao, Chen, 2024. "Multiphase flow dynamics in metal foam proton exchange membrane fuel cell," Renewable Energy, Elsevier, vol. 226(C).
    4. Joachim Baumeister & Jörg Weise & Sebastian Myslicki & Esther Kieseritzky & Götz Lindenberg, 2020. "PCM-Based Energy Storage System with High Power Output Using Open Porous Aluminum Foams," Energies, MDPI, vol. 13(23), pages 1-17, November.
    5. Jesus Fernando Hinojosa & Saul Fernando Moreno & Victor Manuel Maytorena, 2023. "Low-Temperature Applications of Phase Change Materials for Energy Storage: A Descriptive Review," Energies, MDPI, vol. 16(7), pages 1-39, March.
    6. Guo, Hang & Zhao, Qiang & Ye, Fang, 2022. "An experimental study on gas and liquid two-phase flow in orientated-type flow channels of proton exchange membrane fuel cells by using a side-view method," Renewable Energy, Elsevier, vol. 188(C), pages 603-618.
    7. Mohammad Javad Zarei & Hassan Bazai & Mohsen Sharifpur & Omid Mahian & Bahman Shabani, 2020. "The Effects of Fin Parameters on the Solidification of PCMs in a Fin-Enhanced Thermal Energy Storage System," Energies, MDPI, vol. 13(1), pages 1-20, January.
    8. Jin-Soo Park, 2021. "Hydrogen-Based Energy Conversion: Polymer Electrolyte Fuel Cells and Electrolysis," Energies, MDPI, vol. 14(16), pages 1-2, August.
    9. Martin Beer & Marcela Taušová & Radim Rybár & Michal Kaľavský, 2020. "A Novel Economical Method of Determining the Geometric Characteristic of the Metal Foam Based on Image Analysis," Energies, MDPI, vol. 13(13), pages 1-11, July.
    10. Riheb Mabrouk & Hassane Naji & Hacen Dhahri & Zohir Younsi, 2020. "Insight into Foam Pore Effect on Phase Change Process in a Plane Channel under Forced Convection Using the Thermal Lattice Boltzmann Method," Energies, MDPI, vol. 13(15), pages 1-29, August.
    11. Hamidreza Shabgard & Weiwei Zhu & Amir Faghri, 2019. "Integral Solution of Two-Region Solid–Liquid Phase Change in Annular Geometries and Application to Phase Change Materials–Air Heat Exchangers," Energies, MDPI, vol. 12(23), pages 1-20, November.
    12. Hamidi, E. & Ganesan, P.B. & Sharma, R.K. & Yong, K.W., 2023. "Computational study of heat transfer enhancement using porous foams with phase change materials: A comparative review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 176(C).
    13. Wołoszyn, Jerzy & Szopa, Krystian, 2023. "A combined heat transfer enhancement technique for shell-and-tube latent heat thermal energy storage," Renewable Energy, Elsevier, vol. 202(C), pages 1342-1356.
    14. Ewelina Radomska & Lukasz Mika & Karol Sztekler, 2020. "The Impact of Additives on the Main Properties of Phase Change Materials," Energies, MDPI, vol. 13(12), pages 1-34, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:2:p:346-:d:307281. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.